Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Page Fault In Nopaged Area

19 Aug 2012   #1

Windows 7 home premium
BSOD Page Fault In Nopaged Area


Sorry that I couldn't attach the file as you requested since I can't turn on my sony laptop. I was using IE browser when my laptop flagged something on the right bottom. I failed to read it as it shown an error message in blue screen. I tried to turn on my laptop but it failed, so I used it under safe mode. The system detected something called "Trojan xx" which I removed. I think that might be the reason for blue screen. However, I still failed to turn it on under regular mode. Then I tried startup repair and system recover under advanced boot option by pressing F8. They were not able to go through. Do you have any idea to fix this problem?? Please help. Thanks a lot!

Btw I'm using windows 7 home premium, but I don't know whether it's a 32 or 64 bits.

The error message shows: stop: 0*00000050 (0*FFFFF8807793AC50, 0*0000000000000001, 0*FFFFFA8006C252E6, 0*0000000000000005)

My System SpecsSystem Spec
20 Aug 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS .

Resolving the Problem

Resolving a faulty hardware problem:
If hardware has been added to the system recently, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. You should run hardware diagnostics supplied by the system manufacturer. For details on these procedures, see the owner's manual for your computer.

Resolving a faulty system service problem:
Disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service about a possible update. If the error occurs during system startup, restart your computer, and press F8 at the character-mode menu that displays the operating system choices. At the resulting Windows Advanced Options menu, choose the Last Known Good Configuration option. This option is most effective when only one driver or service is added at a time.

Resolving an antivirus software problem:
Disable the program and confirm that this resolves the error. If it does, contact the manufacturer of the program about a possible update.

Resolving a corrupted NTFS volume problem:
Run Chkdsk /f /r to detect and repair disk errors. You must restart the system before the disk scan begins on a system partition. If the hard disk is SCSI, check for problems between the SCSI controller and the disk.

Finally, check the System Log in Event Viewer for additional error messages that might help pinpoint the device or driver that is causing the error. Disabling memory caching of the BIOS might also resolve it.

Source : BSOD Index
My System SpecsSystem Spec

 BSOD Page Fault In Nopaged Area

Thread Tools

Similar help and support threads for2: BSOD Page Fault In Nopaged Area
Thread Forum
Solved BSOD-page fault in non page area BSOD Help and Support
Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs BSOD Help and Support
Solved BSOD page fault in non page area BSOD Help and Support
BSOD Page fault in non-page area BSOD Help and Support
Page fault in non page area bsod BSOD Help and Support
BSOD: Page fault in non page area BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:20 AM.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App