Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build; BSOD on Wake, STOP: 0xF4

21 Aug 2012   #1
Kjelon

Windows 7 Home Premium 64bit
 
 
New Build; BSOD on Wake, STOP: 0xF4

Just built my new system, everything (hardware and software) installed without problem. I've now had several STOP errors occur when waking the machine after it's gone to sleep. Some times it will be fine, but every third time or so I get the BSOD. I've done a little poking around to see if there was an easy fix, but I'm a bit of a novice in this area and I can't find it.


My System SpecsSystem Spec
.

24 Aug 2012   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello there!

Seems like of the crash is pointing to igdkmd64.sys i.e. Intel Graphics Accelerator Drivers so I would recommend to reinstall it completely. Most of the times waking from sleep can trigger if an external componets are connected to USB so try to disconnected them. There is a slight chance it could be Hardware related since BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe.

Run Hardware Diagnostic (RAM and hard Drive) Hardware Diagnostic | Captain Debugger

Run SFC Scan SFC /SCANNOW Command - System File Checker

Install the drivers for PCI Simple Communications Controller

Code:
PCI Simple Communications Controller    PCI\VEN_8086&DEV_1E3A&SUBSYS_84CA1043&REV_04\3&11583659&0&B0    The drivers for this device are not installed.
Disable some of the Startup items follow this article Troubleshoot Application Conflicts by Performing a Clean Startup

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\082112-7222-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Aug 20 04:19:28.742 2012 (GMT+6)
System Uptime: 0 days 2:32:05.569
BugCheck F4, {3, fffffa800ecdf4d0, fffffa800ecdf7b0, fffff80002f9c510}
Probably caused by : wininit.exe
PROCESS_NAME:  wininit.exe
BUGCHECK_STR:  0xF4_IOERR
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
FAILURE_BUCKET_ID:  X64_0xF4_IOERR_IMAGE_wininit.exe
Bugcheck code 000000F4
Arguments 00000000`00000003 fffffa80`0ecdf4d0 fffffa80`0ecdf7b0 fffff800`02f9c510
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081912-8782-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Aug 20 00:14:59.671 2012 (GMT+6)
System Uptime: 0 days 2:31:10.499
BugCheck 7A, {fffff6fc4007f9f8, ffffffffc000009d, 1c0e91860, fffff8800ff3f224}
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+43c81 )
BUGCHECK_STR:  0x7a_c000009d
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x7a_c000009d_igdkmd64+43c81
Bugcheck code 0000007A
Arguments fffff6fc`4007f9f8 ffffffff`c000009d 00000001`c0e91860 fffff880`0ff3f224
BiosVersion = 0316
BiosReleaseDate = 02/14/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed:     3400
CurrentSpeed: 3467
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081912-7628-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 19 11:53:15.756 2012 (GMT+5)
System Uptime: 0 days 23:19:19.584
BugCheck F4, {3, fffffa800ed92b30, fffffa800ed92e10, fffff80002fd6510}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : wininit.exe
PROCESS_NAME:  wininit.exe
BUGCHECK_STR:  0xF4_C0000005
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
FAILURE_BUCKET_ID:  X64_0xF4_C0000005_IMAGE_wininit.exe
Bugcheck code 000000F4
Arguments 00000000`00000003 fffffa80`0ed92b30 fffffa80`0ed92e10 fffff800`02fd6510
BiosVersion = 0316
BiosReleaseDate = 02/14/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed:     3400
CurrentSpeed: 3467
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081912-7332-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 19 21:25:59.221 2012 (GMT+6)
System Uptime: 0 days 9:31:47.049
BugCheck F4, {3, fffffa800d39b460, fffffa800d39b740, fffff80002f83510}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : csrss.exe
PROCESS_NAME:  csrss.exe
BUGCHECK_STR:  0xF4_IOERR
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
FAILURE_BUCKET_ID:  X64_0xF4_IOERR_IMAGE_csrss.exe
Bugcheck code 000000F4
Arguments 00000000`00000003 fffffa80`0d39b460 fffffa80`0d39b740 fffff800`02f83510
BiosVersion = 0316
BiosReleaseDate = 02/14/2012
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed:     3400
CurrentSpeed: 3467
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``

My System SpecsSystem Spec
Reply

 New Build; BSOD on Wake, STOP: 0xF4




Thread Tools





Similar help and support threads
Thread Forum
New Lenovo Laptop Stop Errors Alternating 0xf4 and 0x7a Out the Box
Laptop Lenovo G50-70 Model Name 20351 Windows 7 Ultimate x64 SP 1 Intel i5-4210U 1.7gh Lenovo Lancer 5A2 Samsung DDR3 8G PC3-12800 1.35V Integrated Intel HD 4400 Samsung Momentus 1TB 2.5 inch 5400RPM Microsoft Security Essentials Opera/Firefox/Explorer
BSOD Help and Support
BSOD 0xF4 shortly after wake from sleep
Hi there! Oh the famous BSOD after the computer being asleep. This happens consistently (always, repeatable) around 10 seconds after the computer being woken from sleep. I've attached the BSOD zip file, hopefully that will be helpful. Additional info - this is a brand new computer I put together...
BSOD Help and Support
BSOD STOP 0xF4 while sitting idle
Hello - I saw a BSOD occur today that I'm not familiar with. I don't have a clue on how to fix this. Any help would be appreciated. The computer was sitting idle at the time of the crash. I saw a STOP 0x000000f4 - CRITICAL_OBJECT_TERMINATION. I have attached a SF_Diagnostic_Tool dump. ...
BSOD Help and Support
BSOD once every 3-4days, Stop 0xf4
Hello! Been having a problem with my new build BSODing on me once every couple of days. Happens randomly, the programs on my desktop will stop responding, start closing, then the PC will crash. Thought it might be time to call in the big guns and see if I can get it sussed. Think it might be...
BSOD Help and Support
Many Random BSOD, STOP 0xF4
For about a month now, I've been getting random BSOD. It seems to be happening more frequently. It can happen when gaming, while browsing the internet, or even just idling on the desktop. I ran a memtest a while ago, and it didn't find anything, but I don't think I quite made it to 8 passes before...
BSOD Help and Support
BSOD-Stop 0xF4
Hey guys. I'm back with another BSOD. This time, what happened was when I first switched on the com, there was a message saying (from memory because I forgot to write it down) "The file C:\windows\winsxs\manifest\amd_64...soemthing something is corrupt and unreadable. Run CHKDSK utility. " So I...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ฉ Designer Media Ltd

All times are GMT -5. The time now is 18:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App