Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: !! HELP PLS. !!! RANDOM BSODs - have documented 4- attchd all details

26 Aug 2012   #21
AndyReach9

Win 7 SP1
 
 
Results of SFC SCANNOW - RAN in SAFE MODE

Here is the CBS.log file as I just run SFC - it says that it found some corrupt files that it could not repair.

To refresh history, about 2-3 weeks ago when I decided to rebuild this machine - it was due to SFC failing to repair files. At that time windows was giving some application errors every now and then (but nowhere close to the frequency its doing now- and specialy BSOds, which I got only 2-3 times in 4 months in the previos build).

Pls. help.


My System SpecsSystem Spec
.
26 Aug 2012   #22
AndyReach9

Win 7 SP1
 
 

Quote   Quote: Originally Posted by Anthony View Post
Well if you think its a driver issue, install all the latest drivers from gigabyte: GIGABYTE - Motherboard - Socket 1155 - GA-Z68X-UD3H-B3 (rev. 1.0)

Also disconnect anything that you don't need while troubleshooting

Thanks
I did that- had gotten all the latest drivers from gigabyte before I started building the system. The drivers log shd. have that.
My System SpecsSystem Spec
26 Aug 2012   #23
AndyReach9

Win 7 SP1
 
 

Quote   Quote: Originally Posted by richc46 View Post
Tell me about safe mode, as previously requested, and then we will know which way to go.

Everyone is interested in getting their computer fixed as soon as possible and we do the best we can.
We have only examined one possiblity so far, drivers, usually it takes many more attempts than that. The reports give clues not answers. The only test that I suggested so far was the driver verifier. It normally takes more than one test. The procedure takes time regardless of the analyst.
Rich- haven't heard back from you today. Did you get a chance to look at everything I posted so far. Any ideas?
My System SpecsSystem Spec
.

27 Aug 2012   #24
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Before we begin, you have to realize that we are all volunteers here, trying our best to help many. Asking to be helped as soon as possible will not expedite the ananlysis of your problem. Please be patient, as we are helping many and your questions will be answered, although it may take time. BSODs are extremely time consuming as it is a hit or miss situation many times.
That being said, since your worked of in Safe Mode, you may be able to work in Clean boot, if you can, follow procedure to find the cause of your problem.
Troubleshoot Application Conflicts by Performing a Clean Startup
My System SpecsSystem Spec
06 Sep 2012   #25
AndyReach9

Win 7 SP1
 
 
Fresh set of data- Pls. help

Guys- Iím back here after the lull Ė went of town on work.
I have run significant tests myself with different permutations & combinations. I think it points to some setting issues- as windows is fully patched up and works fine with 1 sRAM stick.
So the observations I made, Iím sharing below - Hopefully one of you gurus can pinpoint the problem now.
1. I went to MOBO and loaded optimized defaults for BIOS (my mobo Gigabyte Z68X-UD3H B3 Ė rev 1.3)
2. I ran memtest for over 10 passes on both the sticks of RAM INDIVIDUALLY in 3 of the 4 slots (didnít get time to check 4th but Im sure itíll be OK and regardless, Iím not using that slot anyway).
3. Both RAMS (individually) pass with 0 errors over 10+ passes overnight. (RAM is Corsair DDR3 XMS 1600MHZ, 1.65V 2 X 4GB sticks - 8GB XMS Memory kit for dual channel systems, 1600MHz, 9-9-9-24, 1.65V = Tech specs here linked XMS3 )
4. When I put both RAMs together, Memtest fails within 5 seconds- gives 40,000 + errors within a few mins. I thought voltage but its on AUTO so it shd. Be OK.
5. Now Iíve used system with just 1 RAM stick in one of the slots and usability wise, it works fine. The moment I added in 2nd RAM stick, I got another BSOD saying ďmemory managementĒ.
6. Attached are all dumps for info- now just the SF diag tool dump but Iíve also put my bios setting in another zip so you could look at it.
All help is appreciated.
My System SpecsSystem Spec
06 Sep 2012   #26
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Looks like its memory.
My System SpecsSystem Spec
06 Sep 2012   #27
AndyReach9

Win 7 SP1
 
 

Quote   Quote: Originally Posted by richc46 View Post
Looks like its memory.
What do you mean. Both RAMs check out fine individually. Could you elaborate
My System SpecsSystem Spec
06 Sep 2012   #28
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

Quote   Quote: Originally Posted by AndyReach9 View Post
Guys- Iím back here after the lull Ė went of town on work.
I have run significant tests myself with different permutations & combinations. I think it points to some setting issues- as windows is fully patched up and works fine with 1 sRAM stick.
So the observations I made, Iím sharing below - Hopefully one of you gurus can pinpoint the problem now.
1. I went to MOBO and loaded optimized defaults for BIOS (my mobo Gigabyte Z68X-UD3H B3 Ė rev 1.3)
2. I ran memtest for over 10 passes on both the sticks of RAM INDIVIDUALLY in 3 of the 4 slots (didnít get time to check 4th but Im sure itíll be OK and regardless, Iím not using that slot anyway).
3. Both RAMS (individually) pass with 0 errors over 10+ passes overnight. (RAM is Corsair DDR3 XMS 1600MHZ, 1.65V 2 X 4GB sticks - 8GB XMS Memory kit for dual channel systems, 1600MHz, 9-9-9-24, 1.65V = Tech specs here linked XMS3 )
4. When I put both RAMs together, Memtest fails within 5 seconds- gives 40,000 + errors within a few mins. I thought voltage but its on AUTO so it shd. Be OK.
5. Now Iíve used system with just 1 RAM stick in one of the slots and usability wise, it works fine. The moment I added in 2nd RAM stick, I got another BSOD saying ďmemory managementĒ.
6. Attached are all dumps for info- now just the SF diag tool dump but Iíve also put my bios setting in another zip so you could look at it.
All help is appreciated.
Does not look good go me
My System SpecsSystem Spec
08 Sep 2012   #29
AndyReach9

Win 7 SP1
 
 
So where do i go from here ??

Rich- I saw that when I ran the test but am not an expert to draw an inference from that-do you have any clues or further course of action for me to take or not ?

OTHERS -- Guys...does anybody have any clues on this - based on all that I reported? I sure hope you do!! thanks in advance
My System SpecsSystem Spec
08 Sep 2012   #30
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

If even one error shows it usually means memory problesms, thats all that anyone can tell you from here.
My System SpecsSystem Spec
Reply

 !! HELP PLS. !!! RANDOM BSODs - have documented 4- attchd all details




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Random Times, Extra Details inside.
So I very recently built my own desktop, everything was running well. Installed window 7 Ultimate and from there tonnes of drivers and windows updates popped up, the usual. However, at decently spaced times it would BSOD, but it's become more and more frequent I've tried to see if it was the...
BSOD Help and Support
Random BSOD ( Win 7) Complete details!
A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've been this stp[ error screen. Restart your computer. If this screen appears again follow this steps: Check to be sure you have adequate disk space. If a driver is...
BSOD Help and Support
Random BSOD and Freezing, Several Types of Errors (details in post)
Hi! I would like to say thank you in advance to anyone who's taken the time to read this post. I've been getting blue screen crashes for the past month or so and it seems to be getting progressively worse. The BSODs began occurring about once every couple of days, now they seem to happen...
BSOD Help and Support
Random BSODs on newly built machine, all details inside
Hello all, As the title says I've been having random BSODs on my newly built machine. Mostly happens on startup, can't get passed the Windows Splash screen when it blue screens. All voltages check out in the BIOS, and memtest returns negative. I'm running a fresh genuine installation of...
BSOD Help and Support
Random BSOD, full details provided, please help
Hi I have been getting random BSOD Sometimes it will BSOD 2 or 3 times a day within an hour or 2 gap and sometimes I can go for 1 week without a BSOD. This is a new computer which I have built with a friend who knows more about putting a PC together than me. All the drivers are up to date. ...
BSOD Help and Support
Ongoing BSODs, Marvell driver (reports attchd)
Thank you very much for your assistance. I appreciate it so much. BSODs = :mad: I built this system 7 months ago in Oct. 2010. Since then I've experienced 25 BSODs, all coming shortly after boot. BlueScreenView lists mv91xx.sys as responsible for 20 of them. I am using one of the Marvell...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App