Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod while playing diablo 3

18 Oct 2012   #11
asdd

windows 7 professional 64 bit
 
 

ok, ran driver verifier for a few days no errors, thought my bsod problem was finally gone
i turn it off and boom bsods start again lol

mindumps are attached
no kaspersky installed
Microsoft security installed instead

please help me

also, i have a question
i have an SSD, when i reinstalled windows i put the paged file on my HDD instead of the SSD because it writes to it too much, do you think this might be the culprit?


My System SpecsSystem Spec
.
18 Oct 2012   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Mate there is a problem, see it:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {8, 80050031, 6f8, fffff80002fce7e0}

Unable to load image Unknown_Module_00000000`000039e9, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`000039e9
*** ERROR: Module load completed but symbols could not be loaded for Unknown_Module_00000000`000039e9
Unknown module 'Unknown_Module_00000000_000039e9' found on stack, using vad to reload module.
!vad_reload -1 0x39e9
Failed to get old VAD root
Unknown module 'Unknown_Module_00000000_000039e9' found on stack, using vad to reload module.
!vad_reload -1 0x39e9
Failed to get old VAD root
***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
A stop 0x7F may be caused out of a lot of reasons.
Usual causes: Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack (source: Carrona.org)

May I see your MSINFO32 file once again? The latest state?
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
Also run Driver Verifier.
Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
18 Oct 2012   #13
asdd

windows 7 professional 64 bit
 
 

ok i uploaded the txt file it created

how about the other minidumps?
one of them was something about usb while the other said something about amd
My System SpecsSystem Spec
.

18 Oct 2012   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I checked the latest one only. As the latest one gives the information about the latest situation. Dont worry. Just enable driver verifier. Upload a few dumps with verifier on.

Probably those will give it causes, including USB and AMD
My System SpecsSystem Spec
20 Oct 2012   #15
asdd

windows 7 professional 64 bit
 
 

ok ran verifier for the whole day while i did stuff on comp and played d3
crashed just now after 24 hours with verifier on
it said dxgkrnl.sys

dump attached
My System SpecsSystem Spec
20 Oct 2012   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Still it is unknown image.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {114f30, b, 0, fffff880052445ff}

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------
Now what we are to do at first is to burn test the CPU
And a stress test of the RAM modules.
Do the tests and let us know the results.
My System SpecsSystem Spec
Reply

 Bsod while playing diablo 3




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Playing Diablo III, also random crashes when playing Diablo III.
Made a new post because I got a different BSOD. Sorry ignore this thread.
BSOD Help and Support
BSOD when playing diablo 3
Hi There I'm having exactly the same issues when playing Diablo 3. So I see the SOLVED part in the thread name and I really would like to know how did you solved it?? Short summary on my activity so far
BSOD Help and Support
BSOD playing Diablo 3
Hi, I just started playing Diablo 3 and I can only get about 5-10 minutes into the game before i get a random BSOD. I don't know how to diagnose these so here I am. See attached for last couple dump files I've gotten while playing. Thanks, Jonathan
BSOD Help and Support
BSOD Playing Diablo 3
i have been getting BSOD's while playing diablo 3, how can i attach the latest log can someone help me figure it out please? i downloaded a debugging tool and here is what the three bsod's list: ntoskrnl.exe+22f56 is one of them dxgmms1.sys+1e803 is another asmtxhci.sys+47754 is the last...
BSOD Help and Support
BSOD Playing WoW and Diablo 3
Hi, I've had 3 bluescreens in the last 2 days. Two while playing WoW and one playing Diablo 3 Beta. I'm having some trouble with the permon /report, when i try to run it i get and an error saying 'The system cannot find the path specified' I've uploaded a screenshot of this, so if anyone can...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App