Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: system crashes during booting

03 Sep 2012   #1

Windows 7 Ultimate 64 bit
 
 
system crashes during booting

Hi, I previously had windows 7 (32 bit)... after installation it was going well...but 2 months later suddenly blue screen problem started to happen quite often... during booting
after the windows logo has been displayed my screen used to appeared black for few seconds & then a blue screen used to appear...containing several messages but i was not able to read the entire thing as it stays for a very few seconds... only one thing i managed to see was "nvlddmkm.sys" error & core dump : 100 . then my pc used to automatically restart....i have tried "Launch Startup Repair", i have tried registry clean softwares,i have also updated my graphics card's(Nvidia Geforce 210) driver... but nothing really benefitted... this problem doesn't appear always but it appears for say 6 out of 10 times during booting & when it happens after the bluescreen & reboot I've noticed gameplaying stutters.. no more smoothness... runs slowly.

initially i had 2 gb ram,recently i installed another 2 gb,so total 4gb ram currently i have... as 32 bit os doesn't detect it so i formatted my system performed a fresh installation of windows 7 64bit.... i thought a format may fix this up but i was wrong... after few days of installation the above problem has started to appear again in the same manner.....

with windows xp i've never experienced such problems..

plz tell me some proper solutions to fix this up.

My System SpecsSystem Spec
.

03 Sep 2012   #2

Windows 7 ultimate x64
 
 

Please use this tool to update your profile specs

And then use this tool to post all the files here
My System SpecsSystem Spec
05 Sep 2012   #3

Windows 7 Ultimate 64 bit
 
 

Hi,according to your advise i've downloaded the tool "SystemInfo.exe" but whenever i've tried to install it an error message named "SystemInfo.exe - .NET Framework Initialization Error" is always being displayed,saying that "To run this application ,you first must install one of the following versions of the .NET Framework: v4.0.30319"... what should i do now????
My System SpecsSystem Spec
.


05 Sep 2012   #4

Windows 7 ultimate x64
 
 

Well just as it say... install .Net framework V 4.0 or better 4.5

You can also use speccy as well
My System SpecsSystem Spec
05 Sep 2012   #5

Windows 7 Ultimate 64 bit
 
 

i've downloaded & run speccy and updated my system specs accordingly.... plz give me proper suggestions....

Thanks in advance...
My System SpecsSystem Spec
05 Sep 2012   #6

Windows 7 ultimate x64
 
 

use this tool to post all the files here
My System SpecsSystem Spec
07 Sep 2012   #7

Windows 7 Ultimate 64 bit
 
 

well i've downloaded & run the tool .. but when i press the "GRAB ALL" button the test starts but an error msg comes as given below

the test haults
as ....
My System SpecsSystem Spec
07 Sep 2012   #8

Windows 7 ultimate x64
 
 

right click on SF diag tool and run as administrator
My System SpecsSystem Spec
07 Sep 2012   #9

Windows 7 Ultimate 64 bit
 
 

So i run the test by performing one by one at a time...
1.Minidump
error is reported as "Access to the path "C:\Windows\Minidump' is denied." & the test haults..

2.Event Log
error is reported as "Could not find file 'C:\Windows\EventApp.txt' " & the test haults..

3.Update Log
the log file i'm attaching as a text file... please see it..

4.Driver List
error is "Could not find file 'C:\Windows\DriverList.txt" & the test haults.

5.Host
error is "Could not find file 'C:\Windows\system32\drivers\etc\HOSTS' " & the test haults.

6. MSINFO32
At the end of the test comes "System Information -> Access is Denied"


please tell me how to solve the blue screen issue....

thanks in advance
My System SpecsSystem Spec
07 Sep 2012   #10

Windows 7 Ultimate 64 bit
 
 

where should i click the right button? if i click the right button on the SF diagnostic tool window(picture on the right) then
nothing is happening...
My System SpecsSystem Spec
Reply

 system crashes during booting





Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:10 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33