Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random freezing started a few weeks ago

05 Sep 2012   #1

Windows 7 Home Premium 64bit SP1
 
 
Random freezing started a few weeks ago

I have gone through all of the suggested bsod fixes and still getting random freezing. I ran SF Diag. tool it pop'd up and error but still ran. I have attached .zip - not sure what else to do?

My System SpecsSystem Spec
.

05 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome

There are no dumps in your zip file. Please make sure you're following the steps properly from here:
http://www.sevenforums.com/crashes-d...tructions.html
My System SpecsSystem Spec
05 Sep 2012   #3

Windows 7 Home Premium 64bit SP1
 
 

Sorry I'm a bit of a noob when it comes to this.
When I right click and run as admin. I get a warning to right click and run as admin? I clicked OK and it starts to run. Crash dump copied successful-click ok- Event Logs copied successful-click ok - it then pops up an error - could not find - C:\windows\system32\drivers\etc\HOSTS and then this under details:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.FileNotFoundException: Could not find file 'C:\Windows\system32\drivers\etc\HOSTS'.
File name: 'C:\Windows\system32\drivers\etc\HOSTS'
at Microsoft.VisualBasic.FileIO.FileSystem.CopyOrMoveFile(CopyOrMove operation, String sourceFileName, String destinationFileName, Boolean overwrite, UIOptionInternal showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.FileIO.FileSystem.CopyFile(String sourceFileName, String destinationFileName, UIOption showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.MyServices.FileSystemProxy.CopyFile(String sourceFileName, String destinationFileName, UIOption showUI, UICancelOption onUserCancel)
at WindowsApplication2.Form1.Button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Fra...7/mscorlib.dll
----------------------------------------
SF Diagnostic Tool
Assembly Version: 1.0.0.0
Win32 Version: 5.0.0.3
CodeBase: file:///C:/Users/Jay/Desktop/SF_Diagnostic_Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...isualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5460 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...dows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5462 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...em.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...e.Remoting.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
My System SpecsSystem Spec
.


05 Sep 2012   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

We'll take a look at the hosts later.
Upload what you have zipped now.
My System SpecsSystem Spec
05 Sep 2012   #5

Windows 7 Home Premium 64bit SP1
 
 

This is what I get when I click Grab All? I ran as admin and had antivirus turned off. This is a new one by the way?
My System SpecsSystem Spec
05 Sep 2012   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

My System SpecsSystem Spec
05 Sep 2012   #7

Windows 7 Home Premium 64bit SP1
 
 

I am having problems getting a full dump? I have increased the page file size (to 7000-8000MB) as I have 4g or ram and it's still not showing up as an option? Both kernal and minidump where turned on all along? Sorry if this isn't the right place to ask this but this has been taking up so many hours of my time over the last 2+ weeks it's driving me nut's! especially since it hasn't froze up in the last few day's.
My System SpecsSystem Spec
05 Sep 2012   #8

Windows 7 Home Premium 64bit SP1
 
 

I didn't have full dump enabled as I have 4g of ram, but followed instuctions-used the download set up and ran and it worked this time! and it's now set! Do I now need to wait for it to freeze (it's been a day and half since last one) to run SF diag.?
My System SpecsSystem Spec
05 Sep 2012   #9
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Run the SF Diag tool to collect crash information, after you have a crash.
My System SpecsSystem Spec
06 Sep 2012   #10

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

If you not getting dumps, at the very least upload the MSINFO32 file.

Thanks
My System SpecsSystem Spec
Reply

 Random freezing started a few weeks ago




Thread Tools



Similar help and support threads for2: Random freezing started a few weeks ago
Thread Forum
BSOD playing Battlefield 3, Started in Last 2 weeks BSOD Help and Support
oxc00000e9 randomly started weeks after laptop dropped General Discussion
Continuous BSOD started 3 weeks ago. BSOD Help and Support
freezing after i started BSOD Help and Support
BSODs started happening 1-2 weeks ago :( BSOD Help and Support
Win 7 started freezing up - getting worse BSOD Help and Support
Win 7 started freezing up - getting worse General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:47 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33