Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Boot Errors: 0x7E, 0xc5....

07 Sep 2012   #1
BTTFfan96

Windows 7 Home Pemium x64
 
 
Boot Errors: 0x7E, 0xc5....

I recently put together an new computer from slightly used old parts. I got it to run only once and installed Windows 7 before problems started to occur. I fixed the original problem (Dual DIMM RAM Mismatches) and now more problems have risen. After I turn on the computer, I hit F11 and choose to boot from my DVD drive (which contains the Windows 7 recovery/ boot disk). After a few seconds, the loading bar appears toward the bottom of the screen, and the green bar scrolls by about 4 times. The screen instantly shows the bsod, but goes away instantly. I restarted the computer, pressed F8 and selected the option to not automatically restart after a crash. The blue screen popped up as usual and it says the computer may not have adequate disk space, outdated drivers, and possible BIOS updates. The error code says the following: "***STOP: 0x00000007E (0xC0000005, 0x8187061c, 0x804035FC, 0x804032F8)". I've checked to make sure everything was properly wired. I've read other threads saying to open a command prompt, but in my case the only way I can do that is to use F8 at startup. I only get the error using F11 to boot the DVD drive. Otherwise, my computer restarts itself and basically goes through an endless loop, getting me nowhere.
-Please help, BTTFfan96


My System SpecsSystem Spec
.

07 Sep 2012   #2
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

What BSOD when booting from DVD? In the "Windows is loading" step, or "windows is starting" step?
My System SpecsSystem Spec
07 Sep 2012   #3
BTTFfan96

Windows 7 Home Pemium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
What BSOD when booting from DVD? In the "Windows is loading" step, or "windows is starting" step?
I gave it a few tries just now, but when I first did it, I didnt press any F keys. Plus, it doesnt say loading or starting. I chose the option "Start Windows Normally" and the loading bar appeared. It looks like the computer isn't loading from the disk drive, because the loading bar looks exactly like the Vista loading bar you see at startup (looks slightly pixelated and only reads "Microsoft Corporation" under it). Then the screen stays black. I've been waiting 30 minutes, and it hasnt changed. The 7 disk is in but isn't loading from it first. I've made sure it's recognized in the BIOS/ CMOS settings. I believe Vista may be on the Hard drive. Now for more investigating...
My System SpecsSystem Spec
.


07 Sep 2012   #4
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Can you or can you not use our computer at the moment?
My System SpecsSystem Spec
07 Sep 2012   #5
BTTFfan96

Windows 7 Home Pemium x64
 
 

I can't use it. I can only get as far as loading the OS.
My System SpecsSystem Spec
07 Sep 2012   #6
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Q1: Do you have a win 7 DVD? Yes/No
Q2: The source of your Win 7 is ______________________?
Q3: Do you have the 25 character product key? (do not post the key)

Need three answers.

Also, I know that the faulty computer will complicate matters, but really do need better system specs.

Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec
(left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Ř Manufacturer and Model OR Custom build.
Ř ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the “Other Info” block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

With Speccy, you can select with your mouse/touchpad info from the display
and paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
My System SpecsSystem Spec
07 Sep 2012   #7
BTTFfan96

Windows 7 Home Pemium x64
 
 

Q1: yes, I have the disk.
Q2: What do you mean "source"?
Q3: yes. I have the key.

I believe the problem is mostly caused by faulty hardware, as I have ran into (and fixed) several problems.
The computer is a complete custom build. The mobo, HDD, CD/ DVD Drive, RAM, etc were all removed from working pcs. So, I don't believe I can tell you much about it. I wont be able to do any of those automatic methods. I will open the BIOS menu and identify what I can.
My System SpecsSystem Spec
07 Sep 2012   #8
BTTFfan96

Windows 7 Home Pemium x64
 
 

So I just tried to install Vista on the system because I can't get the 7 disk to work. My computer recognizes the Disk. Then a black screen with a white bar saying "Windows is loading files...". The screen goes black again then shows the cursor and vista background. After a few seconds of nothing happening, I get another BSOD. This time it reads "PAGE_FAULT_IN_NONPAGED_AREA". Same recommendations. But now a new error code: *** STOP 0x00000050 (0xA1A9EB19, 0x00000000, 0xA1A9EB19, 0x00000002)". Any knowledge as to what that means? Or any recommendations?
My System SpecsSystem Spec
07 Sep 2012   #9
BTTFfan96

Windows 7 Home Pemium x64
 
 

Moving down the list... I tried to install XP Pro on the computer. The installer loads all the files, then bar pops up and says "Creating new files to be copied". Once again, I got a new BSOD. Same messages, but a new terror code: "*** STOP: 0x0000007F (0x0000000D, 0x000000000, 0x000000000). I've almost given up all hope to getting this thing working. I only have 1 more install disk to try (Window XP Ice). If you have any insight towards what may be the problem (see previous post), please do tell.
My System SpecsSystem Spec
08 Sep 2012   #10
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Since you get so many different errors with may disk I think it's a memory problem. Especially stop 50.

Download the bootable ISO Memtest86 - Download Page
Burn it and boot from it. Let it check your memory for 10 hours
My System SpecsSystem Spec
Reply

 Boot Errors: 0x7E, 0xc5....




Thread Tools





Similar help and support threads
Thread Forum
random BSOD'S errors 0x19,0xc5,0x1e
Hello, First of all im new here in the forum and since i couldnt find any solution to those BSOD errors i need help. English is not my main language,so excuse me for any mistakes i can make. well the problem is already about 3-4 months old. the crashes are various-BSOD,black screen,pic freeze...
BSOD Help and Support
BSOD with different errors like 0x1E; 0x3B; 0x4A; 0xD1; 0x7E; 0x0A
Hi I've problem with Win 7 Ultimate 64 bit. I have got a lot of BSOD every day but each time with a different errors like in the thread title. I tried to repair my pc and registry with CCleaner, Uniblue's Powersuite, WinZip System Utilities Suite and Enigma Software Group's RegHunter and...
BSOD Help and Support
BSOD at unpredictable times, errors 0x50, 0x7e, 0x1e, 0x3d and more
For some time now I've been getting BSODs. Usually this occurs when I'm gaming (League of Legends, Dark Souls II) but sometimes it has happened on start-up after a BSOD or just randomly. No single event seems to trigger these but again it happens more often when gaming. I do not remember all of...
BSOD Help and Support
Frequent BSODs, errors 0xb3, 0x1e, 0x7e
Hi all, For the past couple of months I've been having issues with BSODs, ever since I replaced my motherboard, RAM and upgraded from Win 7 Pro 32-bit to 64. I managed to fix a few problems by turning on driver verifier and identifying/removing problem drivers, but I just can't seem to shake...
BSOD Help and Support
BSOD playing Dragon Nest/League of Legends, errors 0x7E, 0x19, 0x3B
I reinstalled Windows 7 about a week ago, still getting BSODs. Attached below are my minidump files. My system specs are: Intel Core i3 CPU 530 @ 2.93GHz Motherboard: ECS H55H-M 4GB RAM Sound Cards: VIA High Definition Audio/Intel(R) Display Audio Graphics Card: Intel HD Graphics ...
BSOD Help and Support
Multiple BSODs Errors: 0x3B, 0x4E, 0x9F, 0x7E, 0x44, 0x10D
Hello, I have been having seemingly random BSODs for quite a while now (since April). I have tried multiple times to repair them, without success, however they seem to be growing in frequency. I have managed to track down the bugcheck codes to six recurring errors, they are as follows: ...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App