I have been getting BSOD for no reason that I can understand. Checking the logs I see issues starting with something called SuperFetch but only can find a site. No software seems to be install but I haven't a clue. Any help would be greatly respected.
ZMan
► form the events, most of all are the same thing:
I would suggest you to go for SFC /SCANNOW Command - System File Checker.Log Name: System
Source: Service Control Manager
Date: 2012-08-20T21:23:43.738
Event ID: 7000
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: YELLOW
Description:
The Diagnostic Service Host service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration.
► Your dumps are not very specific about the errors, but I have seen there the Pool_Corruption with bugcheck 19.
In this situation, it is best to monitor the third party drivers. Please turn the Driver Verifier on.
Driver Verifier - Enable and Disable
► As almost all the dumps are indicating to memory somehow, you need to check the memory modules, if there are any errors or not.
RAM - Test with Memtest86+
► I am seeing that your BIOS version is somehow old.
If possible, upgrade it.Code:BIOS Version/Date Hewlett-Packard 786G6 v01.03, 8/25/2009
► Do one more thing: Hardware - Stress Test With Prime95
Let us know the results.
After running the
1. SFC /SCANNOW Command - System File Checker. it states there was a file it had to fix. The log is attach.
2. RAM - Test with Memtest86+ give this data.
Test 8 Pass 4 Failing Address 00013bc4818 - 315.7MB Good 9bf6fb15 Bad 9b76fb15 Error-Bits 0080000 Count 1 Change -
3. Bios Upgraded
4. Prime95 is having problems with downloading will try again later.
5. Still working on Driver Verifier - Enable and Disable.
Last edited by ZMan; 02 Oct 2012 at 09:24.
Please fill in your system specs, this will help us with the analysis.
Speccy Free System information Utility
Run the SFC /SCANNOW Command two more times with re-boots after each run, even if the next run says it didn't find anything.
One RAM error is too much.
How many RAM cards do you have installed?
Run memtest86+ with one RAM card at a time, as per the tutorial.
You need to find out if one card is bad or if you have a bad mobo slot.
If you get any errors you can stop the test.
Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
You don't need to run Prime95 or Driver Verifier until the RAM issue is fixed.
You are having a lot of plug n play device errors, what do you have plugged into your USB ports?
Check for any new drivers: HP Download drivers and software
Last edited by Dave76; 03 Oct 2012 at 03:44.
Quote