Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD - Memory handling error?


07 Sep 2012   #1

Windows 7 Home Premium 32bit
 
 
Random BSOD - Memory handling error?

I can't remember the exact code of the error but I'm sure the message had to do with memory. I've included a zip with everything from SF diagnostic. The only recent cause I can think of might be from when I installed a new motherboard, cpu and RAM. Sorry I can't explain this better! I think this is about the third BSOD I've had so far.


My System SpecsSystem Spec
.

08 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome

You have two dumps which point toward memory

Usual causes:
Device driver, memory, kernel
STOP 0x0000001A: MEMORY_MANAGEMENT
BSOD Index

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information. 

BugCheck 1A, {41790, fffffa8002549820, ffff, 0} 

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+355e4 )  

Followup: MachineOwner 
---------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA BSOD Index

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffa8c051d4b78, 0, fffff80003099ccb, 5}


Could not read faulting driver name
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )

Followup: MachineOwner
Suggestions:

Run memtest86+ preferably overnight for 8 passes following this tutorial:
RAM - Test with Memtest86+

Post back results when you're done
My System SpecsSystem Spec
19 Sep 2012   #3

Windows 7 Home Premium 32bit
 
 

I finally got around to running all the Memtests.

Results after one full pass were:

Both sticks: 89 errors
Stick 1, slot 1: 10 errors
Stick 1, slot 2: 21 errors
Stick 2, slot 1: 0 errors
Stick 2, slot 2: 0 errors

So, just one bad stick of memory? Hopefully? :P
My System SpecsSystem Spec
.


19 Sep 2012   #4

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Yes! Hopefully
Thanks for posting back.
My System SpecsSystem Spec
30 Sep 2012   #5

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Hi,

Did changing your ram solve your blue screen problems?
My System SpecsSystem Spec
05 Oct 2012   #6

Windows 7 Home Premium 32bit
 
 

No more blue screen, which is good! But I now get random instances where the monitor blanks out and the light flashes as if it's on but the computer isn't, but the computer is still running. :/ All the sound and video shuts off and I have to force the whole thing off and on again. I assume it's just because I've left the bad memory stick out and I'm now running on half the RAM I was before.
My System SpecsSystem Spec
05 Oct 2012   #7

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Hmm
Is this a new computer?
My System SpecsSystem Spec
07 Oct 2012   #8

Windows 7 Home Premium 32bit
 
 

Only the motherboard, cpu and memory sticks are new. I bought them in June as a long overdue upgrade. Not working out as planned. :P
My System SpecsSystem Spec
07 Oct 2012   #9

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Are all the parts compatible with each other?
My System SpecsSystem Spec
Reply

 Random BSOD - Memory handling error?




Thread Tools



Similar help and support threads for2: Random BSOD - Memory handling error?
Thread Forum
BSOD Random Times, Memory Management Error BSOD Help and Support
Getting random Memory Dump BSOD BSOD Help and Support
BSOD of few random error, Memory Management. BSOD Help and Support
Random Memory Management BSOD BSOD Help and Support
Random BSOD occurring while handling laptop? [fresh W7 install] BSOD Help and Support
Random BSOD, Multiple Error Codes, During Gameplay & Memory Usage BSOD Help and Support
Mozilla Fixes Site Error-Handling Bug Security News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:03 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33