Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Random 0x000000BE nvlddmkm.sys

30 Sep 2012   #51
StarrBurst

Windows 7 64bit home premium
 
 

I had forgot to change the voltages for the BSOD's in #49. I set the voltages as asked (shown in attached picture 1.jpg) The computer started and after the BIOS screen it failed to load windows. I tried a second time, and it blue screened (picture 2.jpg). So I set CPU NB VID to 1.30v since it was unstable. Windows loads fine and it blue screens in a matter of minutes, so I set all voltages back to default, and attached another .zip.

Also uninstalled Spybot and Bonjour. Had steam check for any problems with arma2oa (replaced 1 file).

thanks for all the help.


My System SpecsSystem Spec
.
01 Oct 2012   #52
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

From the first snip you lowered the 'CPU Voltage Control' to 1.250v, this is why your system crashed.
Set it back to 'Normal'.
You set the 'CPU NB VID' to 1.1250v, should have been 1.250v.
You lowered the CPU voltage and the CPU/NB Voltage (CPU Integrated Memory Controller), which caused your system to crash.

I asked you to bump the 'CPU NB VID' to 1.250v, Not the 'CPU Voltage Control'.
If it's unstable then bump the 'CPU NB VID' to 1.30v.

Carefully follow these step:
After you set the 'CPU Voltage Control' back to 'Normal' change the following settings.
'DRAM Voltage Control' to 1.550v
'CPU NB VID' to 1.300v

Double check that you set these voltage controls correctly, lowering them will cause your system to crash, raising them too high can damage system components, CPU, RAM, and possibly the motherboard.

Your last crash from your zip file.
Code:
STOP 0x00000124: WHEA_UNCORRECTABLE_ERROR
Usual causes:  Hardware, Incompatibility, May be driver corruption
Probably caused by : AuthenticAMD
PROCESS_NAME:  chrome.exe
IMAGE_NAME:  AuthenticAMD
FAILURE_BUCKET_ID:  X64_0x124_AuthenticAMD_PROCESSOR_CACHE
This crash is blaming your CPU.
If you lowered the 'CPU Voltage Control' to 1.250v, this is why you got this BSoD stop code.

Let me know if you have any questions.
My System SpecsSystem Spec
30 Oct 2012   #53
StarrBurst

Windows 7 64bit home premium
 
 

Hello again, I had my first blue screen since I last posted. Like usual the SF_diagnostic is attached. (it is the one that happened about 4:15 PM ish.

Thanks

StarrBurst
My System SpecsSystem Spec
.

31 Oct 2012   #54
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Can you confirm the voltage settings that are listed above?
'DRAM Voltage Control' to 1.550v
'CPU NB VID' to 1.300v

Did you re-install any of the programs that were requested to be un-installed?

Your last crash:
Code:
STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes:  Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control,
Probably caused by : cdd.dll ( cdd!CDDPDEV::FlushGdiOutput+4b ) - Canonical Display Driver
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800034b8100
GetUlongFromAddress: unable to read from fffff800034b81c0
 ffffffffffffffff 
FAILURE_BUCKET_ID:  X64_0x7E_cdd!CDDPDEV::FlushGdiOutput+4b
Looks like a RAM error again.

If your DRAM voltage is at 1.550v now, then increase it to:
'DRAM Voltage Control' to 1.600v
Leave the 'CPU NB VID' at 1.300v

There is an indication that Steam and various games are causing the errors and likely the crashes.
Bump the DRAM voltage, and see if that helps.
My System SpecsSystem Spec
31 Oct 2012   #55
StarrBurst

Windows 7 64bit home premium
 
 

I had the voltage settings set as asked when it crashed yesterday:
'DRAM Voltage Control' to 1.550v
'CPU NB VID' to 1.300v

Now as you asked I set the DRAM Voltage Control to 1.610V (choices were 1.590 and 1.610, but no option for 1.600)

I did not re-install any of the programs. All steam games are kept up to date, and I had fixed one of the games that you mentioned had a problem.

Thanks

Starrburst
My System SpecsSystem Spec
01 Nov 2012   #56
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

That voltage is ok, AMD systems can take high voltages much better than Intel system.

Let us know if it is stable.
My System SpecsSystem Spec
02 Nov 2012   #57
StarrBurst

Windows 7 64bit home premium
 
 

Blue screen of death while playing Garry's Mod.
My System SpecsSystem Spec
03 Nov 2012   #58
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

It's blaming the graphics driver.
Update the graphics driver, if it still crashes then install an older driver.
There is a possibility that this is caused by the graphics card, load new/old drivers to see if it stops.

Code:
STOP 0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Usual causes:  Device driver
Probably caused by : nvlddmkm.sys ( nvlddmkm+211cc6 )
IMAGE_NAME:  nvlddmkm.sys
FAILURE_BUCKET_ID:  X64_0xD1_nvlddmkm+211cc6
4: kd> lmvm nvlddmkm
start             end                 module name
fffff880`13014000 fffff880`13dd6000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Tue May 15 15:35:36 2012 (4FB20748)
    CheckSum:         00DA5E91
    ImageSize:        00DC2000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
03 Nov 2012   #59
StarrBurst

Windows 7 64bit home premium
 
 

Updated driver from 301.42 to version 306.97
My System SpecsSystem Spec
04 Nov 2012   #60
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Hope it's stable now.

Let us know if you get any more crashes.
My System SpecsSystem Spec
Reply

 BSOD Random 0x000000BE nvlddmkm.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD 0x00000116, dxgkrnl.sys, dxgmms1.sys, nvlddmkm.sys
This issue started back when I bought my 780ti. I bought a new PSU because I thought my older one couldn't handle it. The issue also still occurred when I bought the new PSU. I also let the retailer test some of my parts and they couldn't find any issues. I did a clean install of my Drivers, and it...
BSOD Help and Support
Random BSOD, nvlddmkm.sys identified by driver verifier
Hi there, I've recently been getting random BSOD events, 8 so far, showing 5 different causes, (ndis.sys / ntoskrnl.exe (x3) / Rt64win7.sys / cdd.dll ) I've ran memtest on all 4 sticks of ram with no errors and ran the machine with driver verifier on. this is when i got 2 BSOD within a few...
BSOD Help and Support
Random BSOD, 0x000000BE, removed Ram but still issues
Mate's PC, using an old Asus Striker Extreme with 7 Pro 64bit on it, randomly bluescreening. Hiren's memchecks found no issue, but removed a couple of sticks leaving 4Gb down from the original 6Gb. Seems more stable now but not perfect. Oddly the memchecks. For instance, had Comodo installed on it,...
BSOD Help and Support
BSOD, RAM and Driver Problems of the 0x000000be Variety
Hey everyone, It's been some time since I posted. Since my last post here I found that the line of motherboards I was using were faulty in their design. Since then I switched brands completely and I had been BSOD free for over a year. Then on Thursday I got a BSOD, followed by two more...
BSOD Help and Support
BSOD during general use, errors 0x0000003B and 0x000000BE
Hi, I recently upgraded my system with a new graphics card and SSDs, and a new PSU. I installed windows 7 x64, and now I've had 2 BSODs within 24 hours. The first one occured while I was playing Deus Ex: Human Revolution. The error was 0x0000003B and the faulty file was dxgmms1.sys. I reinstalled...
BSOD Help and Support
Random BSOD/reboot on ASUS laptop - nvlddmkm.sys error
I've been dealing with this problem for a week now. Everything works fine in safe mode, but when I boot into normal mode, it's like a 50/50 chance that it will even let me boot into the OS. It would either just reboot, or if/when it does get into the OS, the system would be very slow &...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App