New
#1
Can anyone help me with my bluescreen errors?
They are almost always different... I think it is a memory problem, as well as graphics card problem
I attached the minidumps
Thank you for your help, in advance.
They are almost always different... I think it is a memory problem, as well as graphics card problem
I attached the minidumps
Thank you for your help, in advance.
Welcome
Your dumps do indicate memory corruption and graphics problem
For memory start with memtest86+ overnight for 8 passes:Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 4E, {99, 1394a0, 3, 172659} Probably caused by : memory_corruption ( nt!MiBadShareCount+4c ) Followup: MachineOwner STOP 0x0000004E: PFN_LIST_CORRUPT
RAM - Test with Memtest86+ BSOD Index
For your graphics card, go through this thread:Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 116, {fffffa8006e584e0, fffff880042af26c, 0, d} *** WARNING: Unable to verify timestamp for atikmpag.sys *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys Probably caused by : atikmpag.sys ( atikmpag+926c ) Followup: MachineOwner VIDEO_TDR_FAILURE (116)
STOP 0x116: VIDEO_TDR_ERROR troubleshooting
Post back when you're done