Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD at random times and pink graphics at times,

12 Sep 2012   #11
Skylais

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok have you tried reseating the graphics card if possible? It may work on another slot if you have one. After that i want you to run this :
Graphics: Video Card - Stress Test with Furmark (Do the above Graphics test only with the latest drivers, and then Run it until the temperatures stop increasing; should be less then 10 minutes. If you don't see any crazy glitches or distortion on the screen, The test most likely passed. Take note if the Temperature gets too high, or you see http://en.wikipedia.org/wiki/Visual_artifact to stop the test.)


My System SpecsSystem Spec
.
13 Sep 2012   #12
behoof

Windows 7 Home Premium 64 bit
 
 

Tried numerous times to use FurMark but error out every time I try to have it accept the advised settings. Googled it and not successful at finding a fix.

I can get it to take two of the suggested changes if I do them one at a time but when I attempt to have t Log it throws the error.

What do you think?

The error message is:

FurMark - swiss made a GPU stress test and OpenGL benchmark has stopped working. A problem caused the program to stop working correctly. Windows will lose the program and notify you if a solution is available.

Side Note: I have only (1) PCIe slot

behoof
My System SpecsSystem Spec
13 Sep 2012   #13
behoof

Windows 7 Home Premium 64 bit
 
 

Skylais,

Here's what I got: no major temp change and no artifacts or visual distortion seen.

I ran test without logging.

AMD Radeon HD6670
GPU use 99%
Beginning temp: 38C
Mem: 667 MHz
Core: 800MHz
Resolution: 1920 x 1080
Monitor: Samsung Plasma 58"
At 5 Minutes temp was 60C
Ran test for over 10 minutes and max temp 64C

Frames: FPS Min1, avg3, max7

behoof

Still hoping for some help with this... thanks in advance all... behoof
My System SpecsSystem Spec
.

16 Sep 2012   #14
behoof

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by behoof View Post
Skylais,

Here's what I got: no major temp change and no artifacts or visual distortion seen.

I ran test without logging.

AMD Radeon HD6670
GPU use 99%
Beginning temp: 38C
Mem: 667 MHz
Core: 800MHz
Resolution: 1920 x 1080
Monitor: Samsung Plasma 58"
At 5 Minutes temp was 60C
Ran test for over 10 minutes and max temp 64C

Frames: FPS Min1, avg3, max7

behoof

If Skylais or anyone could give me some direction on this it would be MOST appreciated.

TIA, behoof
My System SpecsSystem Spec
16 Sep 2012   #15
Skylais

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Windows 7 Upgrade Advisor - Download - Microsoft Windows
Run this and tell me what it finds, or screenshot it. Also those test results seemed fine, as well i am sorry for my delay in reply.
My System SpecsSystem Spec
17 Sep 2012   #16
behoof

Windows 7 Home Premium 64 bit
 
 

Here's the W7 Upgrade Advisor results.

behoof
My System SpecsSystem Spec
17 Sep 2012   #17
Skylais

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by behoof View Post
Here's the W7 Upgrade Advisor results.

behoof
Thanks great to see that everything is compatible with windows 7. Hmm wonder why i never asked before, how about changing monitors? if you have a spare around try it and see if the same problem occurs. As well all of those dump files are inconclusive and non beneficial. So let's try this to see if we can get a pinpointed driver. Upload the latest BSOD dump you get from this : Driver verifier: Driver Verifier - Enable and Disable
As well just for standard procedures, open cmd and type sfc/scannow. If it finds errors, run 3-4 different times with reboots in between. Let's try our best to hopefully fix your problem. Good luck for now, as i will be going to sleep. School tomorrow, anyhow looking forward to new dumps, cmd errors if it says it is finding and fixing any, as well as if the monitor changes anything.
My System SpecsSystem Spec
21 Sep 2012   #18
behoof

Windows 7 Home Premium 64 bit
 
 

Quote   Quote: Originally Posted by Skylais View Post
Quote   Quote: Originally Posted by behoof View Post
Here's the W7 Upgrade Advisor results.

behoof
Thanks great to see that everything is compatible with windows 7. Hmm wonder why i never asked before, how about changing monitors? if you have a spare around try it and see if the same problem occurs. As well all of those dump files are inconclusive and non beneficial. So let's try this to see if we can get a pinpointed driver. Upload the latest BSOD dump you get from this : Driver verifier: Driver Verifier - Enable and Disable
As well just for standard procedures, open cmd and type sfc/scannow. If it finds errors, run 3-4 different times with reboots in between. Let's try our best to hopefully fix your problem. Good luck for now, as i will be going to sleep. School tomorrow, anyhow looking forward to new dumps, cmd errors if it says it is finding and fixing any, as well as if the monitor changes anything.
Hi,

Tried monitor, no change... couldn't get back into normal start w7 with verifier running kept getting bsod saying, "usbfilter.sys" . Ended going to safe mode and closed verifier. Tried to run SF_Diag but it kept erroring out even after many re-boots and such. Went and grabbed mini.dmp's since 9-11-12 to current and attached them here.

Now going back to do a sfc /scannow's and see what turns up.

Hope that usbfilter.sys fault is of help????

Talk soon and thanks, behoof
My System SpecsSystem Spec
21 Sep 2012   #19
behoof

Windows 7 Home Premium 64 bit
 
 

Skylais,

Tried many, many times to sfc /scannow and sometimes got all the way through verification but it found errors and says it can't fix them and they should be listed in CBS Log , so I've attached that log file to this reply.

It says the "Windows Resource Protection found corrupt files but was unabl to fix some of them. No mention of what they are... will try to run sfc again / again.


behoof
My System SpecsSystem Spec
21 Sep 2012   #20
Skylais

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok just to mention don't stress the sfc scannow, if repairs what it can otherwise it wont repair after 3-4 times. Im on my iphone currently typing this and going to be with some friends soon, so i will further assist you once i can.
My System SpecsSystem Spec
Reply

 BSoD at random times and pink graphics at times,




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD at random times, at least 3 times per week. Win 7 64 Ultimate
This is my custom build computer of 4 - 5 years. The past year or so i keep getting random BSOD. There are times right after i do a windows update, the very next day my computer will crash. I am running the latest nvidia drivers, and also run windows update. Some times the error says Memory...
BSOD Help and Support
BSOD at random times, maybe new graphics driver is at fault?
I attached like 7 different crash files, I hope someone can help me out.. Thanks a lot in advance!
BSOD Help and Support
Bsod random times 670 graphics card possible cause?
BEFORE THE FORMAT AND WINDOWS RE-INSTALL EVERYTHING WOULD FREEZE MAKIGN THE MOUSE UNUSABLE AND KEYBOARD SOMETIMES ID GET A POP UP SAYING THE VIDEO DIRVERS HAD UNEXPECTED ERROR AND HAS RESTORED ITSELF (SOMETHING ALONG THEM LINES) I WOULD HAVE TO RESTART THE PROBLEM STILL PERSISTS AFTER THE CLEAN...
BSOD Help and Support
BSOD at random times, 2 times/day in the last 4 days
Hi, I have started getting BSODs twice a day at random moments on my computer in the last 4 days. I've tried to figure out the reason for the BSODs but I'm not sure. I often get the * Hardware failure * bsod. Now I know these can be caused by a number of things, so that is why I included with...
BSOD Help and Support
BSOD at random times, other times just lock up
I have been getting BSOD's for the last week or so. I can't read the entire screen in time when it happens but I do catch something about a hardware issue. This has happened several times while playing video games, but others when surfing the web, or just doing some typing. I've checked all of...
BSOD Help and Support
PLEASE READ BSOD mostly Graphics and Harddisk errors..at random times
Well, here's the system specs to start off... OS: Windows 7 professional x64 new OS Motherboard: Gigabyte Z68X-UD3H-B3 rev. 1.3 CPU: Intel Core i5-2500K x4 Clocked at 5801 MHz RAM: 16gb Corsair Vengeance 1600MHz Harddisk: Seagate 1TB Serial ATA HD 7200/64MB/SATA-6G VGA: NVIDIA GeForce GTX...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App