Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: random BSOD errors

11 Sep 2012   #1

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 
random BSOD errors

hi.

i am getting random bsod's lately. pc worked fine then 1 time i got a bsod and since that i keep getting them randomly.
i installed a fresh window version but i stil get those bsod's ..
i think it could have to do something with memory orso . but since im getting diferent error codes im not sure what it can be.
the errors apear mostly at or right after startup. and sometimes just when the pc is on for some time . i attached the file requested and hope that someone here knows where i should look for to fix this.

greets.

My System SpecsSystem Spec
.

11 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA BSOD Index

Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

First run memtest86+ on each stick for 8 passes preferably overnight RAM - Test with Memtest86+

To make sure that hard drive is good run disk check following this tutorial Disk Check then Hard drive scan usings SeaTools SeaTools | Seagate both long and short tests.


Post back results
My System SpecsSystem Spec
11 Sep 2012   #3

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

hmmm i try to run memtest . it boots fine . but it just keeps rebooting . scanning memory takes few seconds then it reboots . and this goes on forever ?
wierd
My System SpecsSystem Spec
.


11 Sep 2012   #4

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

System Specs Please!!
My System SpecsSystem Spec
11 Sep 2012   #5

Windows 7 ultimate x64
 
 

Quote   Quote: Originally Posted by style2k View Post
hmmm i try to run memtest . it boots fine . but it just keeps rebooting . scanning memory takes few seconds then it reboots . and this goes on forever ?
wierd
What version of memtest are you using... Use the latest one and as advised by Koolkat77... one stick at a time for 6 to 8 passes

Update your system specs as adviced by Anthony ... if need help with that use this

All the BSOD are driver verifier enabled.... You can disable it for the time being.
My System SpecsSystem Spec
12 Sep 2012   #6

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

updates system specs. also run ramtest for like 15 passes and no ram errors so it is not the ram that is faulty.
gonna check hardrive when im back
My System SpecsSystem Spec
12 Sep 2012   #7

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

ok i did long generic test with seatools and boot hd failed passes short and fails smart check.. but the wierd thing is i installed the curent windows on a new hd .
so the old hd is now an extra data disk. and before i installed the curent windows i had the same bsod's (and that was the reason for a new instalation) with an other hd. and i checked that hd and that hd has passed all the tests ?? so whats left ? maybe bad sata ports ? is there a way to check those?
My System SpecsSystem Spec
12 Sep 2012   #8

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

When troubleshooting anything like this your best bet would be to remove all unnecessary Hardware.

Only one hard drive connected, One stick of ram in the first slot, One gfx card, remove any cards from the PCI Slots etc...

Then reinstall Windows, Once stable start adding back your hardware one at a time testing between each one.

Good Luck
My System SpecsSystem Spec
15 Sep 2012   #9

Microsoft Windows 7 Ultimate 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

i found an sata kable that was a little loose i pulled it out . when i restarted my pc the windows would not load anymore missing files orso .. but i had my other hd alsi connected with my previous windows and that worked now i did not get bsod since then but the computer just freezes it happned 2 times now and both times where within few minutes of startup.. i dont have a spare graphic card lyin now but is it possible that the gfx card make my pc crash?
My System SpecsSystem Spec
Reply

 random BSOD errors





Thread Tools



Similar help and support threads for2: random BSOD errors
Thread Forum
Random BSOD, Various Errors BSOD Help and Support
random BSOD errors BSOD Help and Support
Random BSOD errors happening at random times BSOD Help and Support
Solved Getting random BSOD errors need help to know why BSOD Help and Support
Solved Random 109 BSOD errors BSOD Help and Support
random BSOD with different errors BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:08 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33