Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: A number of different BSOD's from a new rig multiple rebuilds


12 Sep 2012   #1

Windows 7 Profesional x64
 
 
A number of different BSOD's from a new rig multiple rebuilds

Hi All,

Couple of days ago I bought a combo of a Gigabyte GA-Z77-DS3H and a i7 3770k with 8GB of DDR 3 RAM. I also purchased a OCZ Agility 3 120gb HDD.

Now after putting all this together and Installing windows 7 pro x64 on it. Im getting a BSOD every half hour minimum sometimes even closer together. So far I have ensured the SSD is on the latest firmware, updated the BIOS to the latest, downloaded all of the drivers from gigabytes site and used them rather than the disk that came with the board.

The stop codes seem to vary iv had the below on this rebuild which has been running for around 90 minutes. I ran a 5 pass memtest last night which came back no errors. Annoyingly all the bug checks seem to point at the kernel and I cant figure out what driver is causing me this pain. Any Ninjas feel like helping iv attached the latest load of logs to this post

0x1A (memory management)
0x0A (IRQL_NOT_LESS_OR_EQUAL0
0x1E (KMODE_EXCEPTION_NOT_HANDLED)
0x3B (SYSTEM_SERVICE_EXCEPTION
0x24 (NTFS_FILE_SYSTEM)

*EDIT

Just to add nothing has been overclocked yet waiting to get it stable first


My System SpecsSystem Spec
.

12 Sep 2012   #2

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

Which Sata port is your SSD connected to? Should be the white ones AHCI Should be set in bios.

Which slots is your memory in? Should be the blue ones.

Thanks
My System SpecsSystem Spec
12 Sep 2012   #3

Windows 7 Profesional x64
 
 

SSD is in SATA0 which is the first white one although RAM is in the White slots. Il swap that over now
My System SpecsSystem Spec
.


12 Sep 2012   #4

Windows 7 Profesional x64
 
 

Well im not gonna jynx it yet but this is the most stable it has been since being built all iv done is swapped the RAM around. Cant believe I didnt try this first, it came as a package with cpu board and RAM pre assembled so assumed they had done this correctly :-( hopefully it is just that although I plan to add another 8GB of RAM to it this weekend so We will see. Thanks for the help and if its stable all the way through this eveening I will add REP to your account and mark as solved.
My System SpecsSystem Spec
12 Sep 2012   #5

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

Fingers Crossed eh
My System SpecsSystem Spec
12 Sep 2012   #6

Windows 7 Profesional x64
 
 

Unfortunately not :-( was probably the longest it went without a BSOD. although have just had 2 in the space of 5 minutes attached is another SF Diag
My System SpecsSystem Spec
12 Sep 2012   #7

Windows 7 Profesional x64
 
 

attempting to rule the ssd out now by installing to a 500gb SATA drive and leaving the SSD disconnected if I dont crack this tonight the whole lot is getting RMA'd
My System SpecsSystem Spec
12 Sep 2012   #8

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

Try with one stick of memory if it errors with that one try with the other one!!
My System SpecsSystem Spec
12 Sep 2012   #9

Windows 7 Profesional x64
 
 

Trying that now, its not the SSD had another BSOD using a SATA drive
My System SpecsSystem Spec
12 Sep 2012   #10

Windows 7 Profesional x64
 
 

nope still the same on either stick of RAM im taking the board ram and CPU back to exchange tomorrow
My System SpecsSystem Spec
Reply

 A number of different BSOD's from a new rig multiple rebuilds




Thread Tools



Similar help and support threads for2: A number of different BSOD's from a new rig multiple rebuilds
Thread Forum
BSOD number 102512-30217-01 BSOD Help and Support
BSOD shortly after loading, do not know error number BSOD Help and Support
BSOD many error number BSOD Help and Support
A number of event log errors + BSOD's BSOD Help and Support
BSOD after changing number of processors BSOD Help and Support
Non Destructive Rebuilds Installation & Setup
WMP12 rebuilds database at every startup Media Center

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:39 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33