Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System remains on while monitor shows no signal message..

15 Sep 2012   #1
kumscp

Windows 7 Ultimate
 
 
System remains on while monitor shows no signal message..

Hi,
I am facing this problem, mostly while playing games and sometimes even when operating computer normally..
Earlier I used to get BSOD but now it comes rarely..
I tried almost everything but wont able to solve this problem
formatted my computer
changed OS
re installed OS
Even changed my monitor
please help me..


My System SpecsSystem Spec
15 Sep 2012   #2
kumscp

Windows 7 Ultimate
 
 

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 16393

Additional information about the problem:
BCCode: 116
BCP1: 84DB3008
BCP2: 8DE3F9B0
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091412-15865-01.dmp
C:\Users\Harish\AppData\Local\Temp\WER-34991-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
My System SpecsSystem Spec
15 Sep 2012   #3
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Hi Welcome to Seven Forums.
To help us help you would you please add your systems specs? Here's how: System Info - See Your System Specs
Under System Manufacturer/Model Number add whether it is a desktop or laptop and whether self built.

Log in to Seven Forums and you will be able to transfer the info directly to your specs page in your profile directly from the System Info app.
My System SpecsSystem Spec
15 Sep 2012   #4
kumscp

Windows 7 Ultimate
 
 

Here are the dump files.. Gathered form SF tool
My System SpecsSystem Spec
15 Sep 2012   #5
kumscp

Windows 7 Ultimate
 
 

It is self built desktop.. I have been using it since last 2 years.
Not able to run that app
so attaching one image giving details about processor and ram
My System SpecsSystem Spec
Reply

 System remains on while monitor shows no signal message..




Thread Tools





Similar help and support threads
Thread Forum
Second monitor remains black
I just upgraded my graphics card from the AMD Radeon 6670 up to the AMD Radeon 7850 (by XFX), and since then, my second monitor is remaining black. It is detected and I can drag windows over into the screen, but I cannot see them. The 7850 does not have a VGA port so I got a VGA to DVI converter...
Graphic Cards
New graphics card shows no signal.
Hello, I recently purchased an nvidia GeForce gt 640 graphics card for my pc and it shows no signal to my monitor.I will try to provide as much information but sorry if I miss things out. After seeing my brother buy this card and it worked fine on his pc I bought one myself along with a new...
Graphic Cards
Nothing shows on monitor after start computer / 2 monitor Win7 desktop
My old Windows 7 desktop sounds normal on booting up but I can't see anything on the monitor. I may not have the monitor connected properly. A couple of years ago I bought a used corporate desktop PC with Windows 7 and used it for a while. Then I bought a new laptop and I haven't used the...
General Discussion
Wifi shows connected with full signal but unable to surf the internet
As shown here: http://i151.photobucket.com/albums/s149/Cloudywolf18/Untitled.png I connected to HTC Aria Wifi Hotspot and on the task bar it shows full signal. On the network and sharing center, there was a 'RED CROSS' although it said Access Type : Internet. After I connected to the...
Network & Sharing
Media Center shows no signal
Using a Sagent SBT TVFM card connected to a Dish Network Dual Receiver as a 2nd TV connection of Antenna, channel 21. Receiver is an HDTV for 1st TV only, so taken from 2nd TV connection, not HDTV. Under XP, using Sagent's software, set to Antenna, channel 21, receive TV fine. However, under...
Media Center
New TFT monitor displays "No Signal" message
My old CRT monitor (Samsung 957DF) finally completely died yesterday so I had to replace it. Several months ago I bought a relatively cheap TFT monitor (Acer V223HQ Bb) and while my Windows 7 installation was still fresh, I could switch between the two monitors (Samsung CRT and Acer TFT)...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App