BSOD twice now two errors 0xc0000001 0xc0000221

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 7 Ultimate
       #1

    BSOD twice now two errors 0xc0000001 0xc0000221


    I had two BSOD in a row, the second one occurred during startup. And now my pc won't boot, I get the following error when I start it up it gives me an option to do startup repair or start normally, either one just send the pc into a restart loop. I have managed to get F8 to work once but it just sends it restarting.

    I have tried to use a repair disc and a install disc to run startup repair via those disc, but all I get is the following errors.

    File: /windows/system32/config/system

    status: 0xc0000001

    Info: Windows failed to load because the system registry file missing, or corrupt.

    OR

    File: \windows\system32\ntkrnlpa.exe

    status: 0xc0000221

    info: windows failed to load because the kernel is missing, or corrupt.

    that 0xc0000001 error occasionally adds "winload.exe" to the end of the file path.

    I have ran out of ideas, any help?
      My Computer

  2.   My Computer


  3. Posts : 8
    Windows 7 Ultimate
    Thread Starter
       #3

    now how am I suppose to do all that when I can't even load the system?
      My Computer


  4. Posts : 8
    Windows 7 Ultimate
    Thread Starter
       #4

    Can I get some legitimate help?
      My Computer


  5. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #5

    Sorry for the late reply .... can you boot in Safe Mode
      My Computer


  6. Posts : 8
    Windows 7 Ultimate
    Thread Starter
       #6

    I am able to select the f8. screen but it goes into a restart loop for a few mins and ends on those two errors
      My Computer


  7. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #7

    So you cannot boot into even safe mode?

    Your system specs are also silent about your hardware. How old the computer is, and how old is the installation is?

    You try a Clean Reinstall - Factory OEM Windows 7.
    To store your data secured before formatting the disk, save them in any external HDD, following the method Copy & Paste - in Windows Recovery Console.

    One more question .... wherefrom you have got the copy of windows? is it, by any chance, a checked build?

    If the installation also fails, we are to think about the HDD itself and the RAM.
      My Computer


  8. Posts : 8
    Windows 7 Ultimate
    Thread Starter
       #8

    Correct, I can't boot into anything. including discs
      My Computer


  9. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #9

    Do you have access to another computer? if so, do these on that .

    ► Hard Disk Check:

    1. Reseat the sata and power.
    2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
    3. Seatool for dos: SeaTools | Seagate download
      Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

    ► RAM Check:
    RAM - Test with Memtest86+
    Run memtest for at least 8 passes, preferably overnight.


    Let us know the results.
      My Computer


  10. Posts : 8
    Windows 7 Ultimate
    Thread Starter
       #10

    all that is fine it passed.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:28.
Find Us