Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when restarting from "sleep-mode"


18 Sep 2012   #11

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
It is driver verifier that is causing it slow.
Still nothing How much longer should I keep it running? And if it doesn't BSOD in the 24hours, what does that mean? That updating the VGA driver was the solution?

My System SpecsSystem Spec
.

19 Sep 2012   #12

Windows 7 Home Premium 64bit
 
 

Bump @Arc
My System SpecsSystem Spec
19 Sep 2012   #13
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Sorry for the late reply, sir! Things around me is not going very fine.

Yes, your nvidia driver is somehow old, it is of October 2011. So you should update it. And, you now disable driver verifier.

After disabling driver verifier, follow these steps to update nvidia driver:
If it still crashes, we are to think otherwise.



Saying again, sorry for the late.

EDIT: It is not crashing while verifier is enabled indicates that it is not any of the drivers that is causing the crashes, and the reason is hidden in somewhere else. Drivers are all able to take stress.
My System SpecsSystem Spec
.


19 Sep 2012   #14

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
Sorry for the late reply, sir! Things around me is not going very fine.

Yes, your nvidia driver is somehow old, it is of October 2011. So you should update it. And, you now disable driver verifier.

After disabling driver verifier, follow these steps to update nvidia driver:
If it still crashes, we are to think otherwise.



Saying again, sorry for the late.
Oh, don't worry about it

And I think I mis-typed, I havent had any BSOD's since I started this thread!! What I did was install the NVIDIA Driver I found from Acer's website. So the drivers list included in my original post shows the old driver I had. Seems to have done the trick, doesn't it?

I have switched the driver verifier off as well. Had it running for as long as you said and nothing happened

Again, I appreciate your help so much!
My System SpecsSystem Spec
19 Sep 2012   #15
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Thank you

If it crashes again, I will not late that time, I hope.
My System SpecsSystem Spec
22 Sep 2012   #16

Windows 7 Home Premium 64bit
 
 

@Arc

Hi again! The computer has been running well for a few days, but yesterday it started BSOD'ing again. When I got home a few hours ago I couldn't even boot it up, due to BSOD's popping up everywhere, different ones as well. Managed to back everything up though.

Tried reseating the RAM-bricks, didnt work. However what did work was running it with only one of the RAM bricks inserted, the smaller one I think. (I've got 6MB Ram, so im only using the 2MB piece for it to work. Doesnt work if I only use the 4MB piece) The computer is very much slower now though

I've uploaded the latest info from the Diagnostic tool in this post, hope you can see anything useful
My System SpecsSystem Spec
22 Sep 2012   #17
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

You need to uninstall AVG. It is always a trouble.
Code:
Loading User Symbols
Unable to load image \SystemRoot\system32\DRIVERS\avgldx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgldx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgldx64.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, 28e04, fffff880009a80a8, fffff880009a7900}

Probably caused by : avgldx64.sys ( avgldx64+11bc4 )

Followup: MachineOwner
---------
Use Microsoft Security Essentials. That's the problem free one.
My System SpecsSystem Spec
22 Sep 2012   #18

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Arc View Post
You need to uninstall AVG. It is always a trouble.
Code:
Loading User Symbols
Unable to load image \SystemRoot\system32\DRIVERS\avgldx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgldx64.sys
*** ERROR: Module load completed but symbols could not be loaded for avgldx64.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, 28e04, fffff880009a80a8, fffff880009a7900}

Probably caused by : avgldx64.sys ( avgldx64+11bc4 )

Followup: MachineOwner
---------
Use Microsoft Security Essentials. That's the problem free one.
Thanks, didnt know this! Uninstalling AVG now and getting Microsoft Security Essentials instead. Should I try putting in the second RAM piece and start it up like normal after this?
My System SpecsSystem Spec
22 Sep 2012   #19
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

First, let it run in this condition for some time, observe if it crashes again or not.

If not, put the other RAM back.
My System SpecsSystem Spec
23 Sep 2012   #20

Windows 7 Home Premium 64bit
 
 

@Arc

Hi again So the computer has been running with only the one piece for over a day now, no BSOD's So I decided to put the other one in again earlier, but then it was back to normal, wouldn't boot up due to BSOD appearing. Have to use it with only the one piece it seems, but I've included the latest info from the diagnostic tool. Let me know if you see anything useful!

And does this mean that the piece is damaged, and that a new one will fix the issue?
My System SpecsSystem Spec
Reply

 BSOD when restarting from "sleep-mode"




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:51 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33