Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD's happening all the time.


20 Sep 2012   #1

Windows 7 Home Premium 64Bit
 
 
BSOD's happening all the time.

Hi, I had an issue with my PC BSODing now and again, it seemed to be when I was printng, but also happened at other times too. I was getting a BSOD once every few days.
So I updated all my drivers ( found about 14 out of date ) made sure there were no windows updates, and thought that should fix it.
But now it is BSODing every few mins.

I'm running Windows 7
Cpu : Intel Core i7-2700K 3.50GHz (Sandybridge) Socket LGA1155 Processor
MB : Asus P8Z68-V GEN3 Intel Z68 (Socket 1155) DDR3 Motherboard
RAM : Corsair Vengeance Gold 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit

Attached is a zip with 45 dump files over 3 days.

Any help would be appreciated.

Thanks in advance.

Dre...

My System SpecsSystem Spec
.

20 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Welcome

Please upload your msinfo32.nfo file. To get this:
  • Click on the Start
  • Type msinfo32 into the Search programs and files box
  • When it opens, go to File, Save
  • Save as msinfo32.nfo and save in a place you will remember
  • Let it finish the process of gathering and saving the system info
  • Right click the .nfo file, click send to compressed (zipped) folder
  • Upload the .zip file here.
My System SpecsSystem Spec
20 Sep 2012   #3

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Almost all your dumps show cause as iusb3xhc.sys
Go through the tutorial below for a possible fix:
USB Driver - General Fix for Problems

I will be waiting for your msinfo file.
My System SpecsSystem Spec
.


21 Sep 2012   #4

Windows 7 Home Premium 64Bit
 
 

Here is the msinfo file
My System SpecsSystem Spec
21 Sep 2012   #5

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Thanks
Seen it.

Did you try the general usb fix?
Had any BSoD?
My System SpecsSystem Spec
21 Sep 2012   #6

Windows 7 Home Premium 64Bit
 
 

I have gone through the USB fix, took a little while to get the printer reinstalled. It kept failing to install one of the drivers. In the end I noticed it was looking on windows update to find it, told it not to and it installed fine.
Thanks for your help so far, I guess its cross fingers and wait time
My System SpecsSystem Spec
21 Sep 2012   #7

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Alright
Keep us posted
My System SpecsSystem Spec
21 Sep 2012   #8

Windows 7 Home Premium 64Bit
 
 

OK so it seems that the BSOD's have calmed down, only problem is that almost every time I try to print something I get a BSOD. And yes the printer is connected via USB.
When I did the USB fix I did delete the printer driver, and downloaded the latest software to install it again.
My System SpecsSystem Spec
21 Sep 2012   #9

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Did you try installing the driver from device management?

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
    -Click on the Start Orb.
    -In the Start Search box type: device manager and then press enter and you should see something similar to the below example.
  2. In the Device Manager locate the device you wish to update the drivers for/look for a
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.
My System SpecsSystem Spec
24 Sep 2012   #10

Windows 7 Home Premium 64Bit
 
 

OK so I am at a loss, with all the drivers reporting to be up to date, nothing in device manager with a warning, I am still getting BSOD's every time I print. It will print the first page sometimes, and then crash on the second, and sometimes crashes 3/4 of the way through the first page.
As it seems to be a USB issue, I was thinking of getting an AP point for my network and hooking the printer up wirelesly as a networked printer, as it does have this capability.
My System SpecsSystem Spec
Reply

 BSOD's happening all the time.




Thread Tools



Similar help and support threads for2: BSOD's happening all the time.
Thread Forum
Solved BSOD keeps happening BSOD Help and Support
BSOD happening once/day (or more) BSOD Help and Support
BSOD Happening A Lot! BSOD Help and Support
BSOD, been happening forever BSOD Help and Support
BSOD started happening BSOD Help and Support
BSOD - Happening Often BSOD Help and Support
BSOD happening all the time - what to do? BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:36 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33