BSOD - Randomly usually within an hour of booting

Welcome

Your BSoD is caused by Daemon Tools (its a known cause of BSoDs)
Please uninstall it and let us know if the problem persists.

Code:

2: kd> lmvm dtsoftbus01
start             end                 module name
fffff880`04146000 fffff880`04189000   dtsoftbus01 T (no symbols)           
    Loaded symbol image file: dtsoftbus01.sys
    Image path: dtsoftbus01.sys
    Image name: dtsoftbus01.sys
    Timestamp:        Thu Jan 13 14:27:08 2011 (4D2EB75C)
    CheckSum:         00045141
    ImageSize:        00043000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

You're welcome.

Is any of your hardware overclocked? Asking cause I had seen the older dump which showed stop 124.
You may go through this: Stop 0x124 - what it means and what to try

The dump is of 23-09-2012
Have you updated to the latest firmware for your SSD?

Lets enable driver verifier to rule out buggy drivers.

Driver Verifier

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in verifier and press Enter
- Select Create custom settings (for code developers) and click Next
- Select Select individual settings from a full list and click Next
- Select everything EXCEPT FOR Low Resource Simulation and click Next
- Select Select driver names from a list and click Next
Then select all drivers NOT provided by Microsoft and click Next
- Select Finish on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable

Verifier puts extreme stress on the drivers, bad ones will cause BSOD. If we change all those drivers we hope for no more BSODs, If you get no BSODs, then its not a driver and we look to hardware. With verifier on your computer may be a little laggy, but actually..its just doing its work.

Information
Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.

Capt.Jack Sparrow said:

Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Okay one of your other dump shows FNETURPX.SYS caused the BSoD.

You need to uninstall this driver as I think there is no update on it and its old.

1. Download and install Driver Sweeper:
   |MG| Driver Fusion (Driver Sweeper) 1.2.0 Download
2. Boot into Safe Mode from Advanced Boot Options:
   Advanced Boot Options
3. Type in Driver Fusion in Search
4. Remove that driver

Code:

3: kd> lmvm FNETURPX
start             end                 module name
fffff880`02dda000 fffff880`02de3000   FNETURPX T (no symbols)           
    Loaded symbol image file: FNETURPX.SYS
    Image path: FNETURPX.SYS
    Image name: FNETURPX.SYS
    Timestamp:        Sat Oct 04 08:27:02 2008 (48E6D476)
    CheckSum:         00010F39
    ImageSize:        00009000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Let us know if you were able to get rid of it