Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSOD with BCCode 109

25 Sep 2012   #1
karmakar13

Windows 7 Ultimate x64
 
 
Frequent BSOD with BCCode 109

I have a Windows 7 x64 OS, and it keeps crashing recently with a bluescreen, the following information is shown on startup ..
Problem Signature
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 16303
Additional information about the problem:
BCCode: 109
BCP1: A3A039D89A5D081B
BCP2: 0000000000000000
BCP3: 348D6F087DB64051
BCP4: 0000000000000101
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
My system specs are as follows
CPU: Intel Core 2 Duo E4300
RAM: 2GB DDR3 1333 EVM + 4GB DDR3 1333 Corsair
Graphics: NVidia Geforce 210 1GB
Harddisk: Seagate Barracuda 500GB
SMPS: Frontech 400 watts
Motherboard: Biostar G41D3C
I am at my wits end with this problem, PLEASE advise how to fix it ....
P.S.: I have attached the info file retrieved by the SF Diagnostic Tool ..


My System SpecsSystem Spec
.

25 Sep 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Welcome aboard, Karmakar. From Bengal I guess?

You are getting a Stop 0x109 error, which may be caused either a device driver, or by a faulty RAM. But, your dumps does not give a trace of any driver faulting there. Before blaming the RAM, let us be sure that no device driver is causing it actually.

In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
25 Sep 2012   #3
karmakar13

Windows 7 Ultimate x64
 
 

Thanks a lot.. will do what you said immediately. and I am from Bengal ..
I forgot to mention earlier that my system is missing the system beeps on start up..
My System SpecsSystem Spec
.


25 Sep 2012   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by karmakar13 View Post
I am from Bengal ..
Me too!

That beep may be disabled in BIOS.

Inform us at the first crash after verifier is enabled, with the crash dumps.
My System SpecsSystem Spec
25 Sep 2012   #5
karmakar13

Windows 7 Ultimate x64
 
 

This is the information after the first crash given in the attachment..
My System SpecsSystem Spec
25 Sep 2012   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

So, it is Atheros NIC driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff98021542f50, 2, 0, fffff8800437dc6a}

Unable to load image \SystemRoot\system32\DRIVERS\L1C62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+5c6a )

Followup: MachineOwner
---------
And, it is somehow old.
Code:
1: kd> lmvm L1C62x64
start             end                 module name
fffff880`04378000 fffff880`0438d000   L1C62x64 T (no symbols)           
    Loaded symbol image file: L1C62x64.sys
    Image path: \SystemRoot\system32\DRIVERS\L1C62x64.sys
    Image name: L1C62x64.sys
    Timestamp:        Mon Sep 27 12:06:23 2010 (4CA03B67)
    CheckSum:         0002220E
    ImageSize:        00015000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the driver, you will get it in ATHEROS drivers for Microsoft Windows (Atheros?????)

Disable verifier for now. After doing the update, observe the system. If it crashes again, inform us with the dumps. We may suggest you to enable verifier again.
My System SpecsSystem Spec
25 Sep 2012   #7
karmakar13

Windows 7 Ultimate x64
 
 

Thanks a ton .. I'l do that immediately ..
My System SpecsSystem Spec
25 Sep 2012   #8
karmakar13

Windows 7 Ultimate x64
 
 

I tried to update the driver but they don't have any latest version of it there.. Is there anything else which can cause the crashes.. the only parts of my pc which are really old are the smps and the cpu.. is there any way to find out if there's anything wrong with them ??
My System SpecsSystem Spec
25 Sep 2012   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

That driver is causing the problem, either you have to update it, or you have to disable it.
My System SpecsSystem Spec
Reply

 Frequent BSOD with BCCode 109




Thread Tools





Similar help and support threads
Thread Forum
Frequent BSOD with f4 BCCode: f4
I recently build a new PC with the following config Motherboard: Gigabye GA-H81M-S1 Processor: Intel i3-4130 Graphic Card : Asus NVIDIA GeForce 210 1 GB DDR3 RAM: Transcend 4GB DDR3 1333Mhz & 2GB (from my old pc) Seagate HDD (Also from my old pc) It's not even completed one month. I...
BSOD Help and Support
BSODS getting more frequent just idling BCCode: 1e
Unfortunately since the PC that is crashing is my file computer I don't have it actively on a monitor and have been unable to catch the BSOD message itself. All it does it sit there and idles most of the time. It seems that if I have something actively running on it the BSOD is delayed slightly...
BSOD Help and Support
BSOD BCCode: 7a Frequent Shutdown
Source Windows Summary Shut down unexpectedly Date 7/12/?2013 11:12 PM Status Not reported Problem signature Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Extra information about the problem
BSOD Help and Support
Frequent/randon BSODs. once BCCode =3b, once BCCode =1e,
Frequent and randon BSODs. once BCCode =3b, once BCCode =1e, others unknown. Dell precision 380 w/ 4GB. Upgraded OS to WIN 7 Premiun Home 64 bit in June 2012 (from XP Pro). WIN 7 Premium Home Family Pack (upgrade). Using Windows Security Essentials. Have scanned frequently. Also downloaded and...
BSOD Help and Support
Frequent BSODs - BCCode=f4/03
I am at my wits end with this problem. I am an experienced PC person who has built many machines before but I never had this much trouble diagnosing a problem. New build using MSI H55M-E33 mobo, core i3, 4GB Gskil (all new) and a 3-5 yr old WD 160 GB drive. Windows 7 Pro, fresh install (coexists...
BSOD Help and Support
Frequent BSOD BCCode 24
I am getting random BSOD and I don't know why. I have attached the dump files. Please help. Custom System Running 7 Ultimate x64 8gb ram 2.4 quadcore intel 5 hard drives 2nvidia 9800gtx 1200 w powersupply
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App