Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IRQL BSOD problems


01 Oct 2012   #11
ivan495

Windows 7 Ultimate x64
 
 

Tried to put latest AMD GPU beta drivers but i get the same thing.

I even got "PAGE_FAULT_IN_NONPAGED_AREA". That is strange because i googled it and in most cases, it has to do with RAM memory.

Then i got some "USBPORT.SYS" and same "ataport.SYS and atikmdag.sys" all combined with "ntoskrnl.exe"

I think i should go with fresh windows install and again search and install driver by driver.


My System SpecsSystem Spec
01 Oct 2012   #12
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Quote   Quote: Originally Posted by ivan495 View Post

I think i should go with fresh windows install and again search and install driver by driver.
Good idea, I must to say
My System SpecsSystem Spec
01 Oct 2012   #13
ivan495

Windows 7 Ultimate x64
 
 

I have 2 partition. One partition = C Local Disk is for Windows and second is only for installed games/downloaded movies/music.
Do i need to format both drives or i can just format C: and reinstall windows?
My System SpecsSystem Spec
04 Oct 2012   #14
ivan495

Windows 7 Ultimate x64
 
 

Did clean windows install but i still got BSOD.
Here is my DUMP file.
My System SpecsSystem Spec
04 Oct 2012   #15
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Ivan, in your clean install, you installed some craps. Uninstall there.
Then, update Linksys Wireless-G PCI Adapter from Linksys WMP54G. That one you installed is of 2009, and it is failing constantly. That is one of the main causes of the crashes.

Change the version of AMD display driver, too. What I am seeing is that the July version is crash prone. Change it any later version/beta, or to an earlier version. This is also crashing your system.

Donl let uTorrent autostart with windows. That is also a cause of crashes.

After making the changes, let us know.
My System SpecsSystem Spec
07 Oct 2012   #16
ivan495

Windows 7 Ultimate x64
 
 

Deleted old and installed newest Graphics card drives. Replaced Avira with MSE and removed Asrock thing and Daemon tools and still get BSOD.

That link that you posted about wireless, that is not my PCI-e wireless card. I have D-Link DWL-G510 and newest driver for it.

Here is my new dump.
My System SpecsSystem Spec
08 Oct 2012   #17
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Ivan,
► still your crashes indicate to Linksys Wireless-G PCI Adapter.
Code:
fffff880`02f8a348  fffff880`03602501Unable to load image \SystemRoot\system32\DRIVERS\rt61.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for rt61.sys
*** ERROR: Module load completed but symbols could not be loaded for rt61.sys
 rt61+0x2501
=====================================================
mvm rt61
start             end                 module name
fffff880`03600000 fffff880`03673000   rt61     T (no symbols)           
    Loaded symbol image file: rt61.sys
    Image path: \SystemRoot\system32\DRIVERS\rt61.sys
    Image name: rt61.sys
    Timestamp:        Tue Jun 02 15:05:28 2009 (4A24F260)
    CheckSum:         0006C736
    ImageSize:        00073000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
If you dont use it, uninstall it.

► Again, despite of being the latest version, it still crashes on ATI driver
Code:
fffff880`02f8ae68  fffff880`04852c74Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x4fc74
Try uninstalling and reinstalling it again, and do it, too.
Video Card - Stress Test with Furmark

► Disable USB Selective Suspense, if it is enabled.
USB Selective Suspend - Turn On or Off
Code:
fffff880`02f8b3c0  fffffa80`0395c1a0
fffff880`02f8b3c8  fffff880`03758960 USBPORT!USBPORT_Core_iInsertPriorityTransferDirect+0x190
fffff880`02f8b3d0  fffffa80`0395c050
fffff880`02f8b3d8  fffff880`037559b9 USBPORT!USBPORT_TxSetState+0x1d
fffff880`02f8b3e0  fffffa80`0395cd28
fffff880`02f8b3e8  fffff880`037485c2 USBPORT!USBPORT_Xdpc_iSetState+0x2a
fffff880`02f8b3f0  00000000`00000000
fffff880`02f8b3f8  00000000`00000008
fffff880`02f8b400  fffffa80`0395c050
fffff880`02f8b408  fffff880`03758aed USBPORT!USBPORT_Core_iInsertPriorityTransfer+0x131
fffff880`02f8b410  fffffa80`03fd7010
fffff880`02f8b418  fffff880`03748783 USBPORT!USBPORT_Xdpc_iSignal+0xcb
► And, whatever is your network driver, update it.
My System SpecsSystem Spec
12 Oct 2012   #18
ivan495

Windows 7 Ultimate x64
 
 

No luck.
Disabled USB selective suspend, uinstalled new and installed older drivers, checked C drive (no errors), tested GPU with Furmark but only for a short time. No artifacts or any other error. My PCI Wireless card drivers are up to date. I dont know what to do.

I dont think its really a drivers problem. Everything worked fine before BIOS update. After BIOS update, i get this often BSODs.

My new dump.
My System SpecsSystem Spec
12 Oct 2012   #19
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

So here it is :
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000040, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88002f64180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.
Follow STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg.
My System SpecsSystem Spec
12 Oct 2012   #20
ivan495

Windows 7 Ultimate x64
 
 

So what should i do?
I already tested most of my hardware with prime95, memtest, Furmark and all passed. Should i re-flash BIOS and then return it do default settings?
My System SpecsSystem Spec
Reply

 IRQL BSOD problems




Thread Tools



Similar help and support threads for2: IRQL BSOD problems
Thread Forum
BSOD BSOD Driver irql-not-less-or-equal/freezes with immediate restart BSOD Help and Support
BSOD randomly (no specific trigger) Commonly an IRQL issue on BSOD BSOD Help and Support
BSODs all the times (During Boot, during Windows, IRQL, Driver IRQL) BSOD Help and Support
BSOD / Appcrash - IRQL / Page Fault / Driver IRQL BSOD Help and Support
Irql bsod BSOD Help and Support
Irql bsod BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:51 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App