 | |
| |
| 20 Oct 2012 | #31 |
| | Just runned short 20 minutes test. 1 minute at start and last 5 minutes idle (i forgot to change theese) so real LOAD was tested about 14-15 minutes. No errors. Should i run GPU test too? |
My System Specs | |
| 20 Oct 2012 | #32 |
| | Keep the 1 minute idle before and the 5 minute idle after, it gives useful information. You can run the GPU test if you want. Your CPU Vcore - CPU voltage - is fluctuating quite a bit. This can cause instability. Run the same two OCCT tests after you flash the BIOS to 1.60, post the graphs here. |
| My System Specs |
| 25 Oct 2012 | #33 |
| | Ok, i re-flashed BIOS and returned it to default. After that, not a single BSOD in 3-4 days. Looks like problem was in CPU. Unlocked third core caused BSOD. Thats strange because third CPU core is perfectly stable. |
| My System Specs |
| . |
| |
| 28 Oct 2012 | #34 |
| | I've seen that before, unlocking core(s) can cause instability. Glad to hear it's running stable for you, you can mark this thread 'Solved'. |
| My System Specs |
 |
IRQL BSOD problems problems?
| Thread Tools | |
| Similar help and support threads for: IRQL BSOD problems | ||||
| Thread | Forum | |||
| BSOD randomly (no specific trigger) Commonly an IRQL issue on BSOD | BSOD Help and Support | |||
| BSOD BSOD Driver irql-not-less-or-equal/freezes with immediate restart | BSOD Help and Support | |||
| BSODs all the times (During Boot, during Windows, IRQL, Driver IRQL) | BSOD Help and Support | |||
| BSOD / Appcrash - IRQL / Page Fault / Driver IRQL | BSOD Help and Support | |||
All times are GMT -5. The time now is 02:35 AM.
