Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Page Fault in Nonpaged Area

30 Sep 2012   #1

windows 7 home premium 64bit
 
 
BSOD Page Fault in Nonpaged Area

Hi All,

I have today found BSOD Page Fault in Nonpaged Area. Laptop working ok in safe mode with networking.

I've attached the dump file as directed.

When I try perfmon /report it states "an error occured while attempting to generate the report."

Spec: Win 7 Home Premium x64, pre installed on laptop by HP. OS never re-installed. System approx 3 years old.

My System SpecsSystem Spec
.

30 Sep 2012   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Please upload your msinfo32.nfo file. To get this:
  • Click on the Start
  • Type msinfo32 into the Search programs and files box
  • When it opens, go to File, Save
  • Save as msinfo32.nfo and save in a place you will remember
  • Let it finish the process of gathering and saving the system info
  • Right click the .nfo file, click send to compressed (zipped) folder
  • Upload the .zip file here.
My System SpecsSystem Spec
30 Sep 2012   #3

windows 7 home premium 64bit
 
 

Thanks for your help.

Requested file is attached
My System SpecsSystem Spec
.


30 Sep 2012   #4

windows 7 home premium 64bit
 
 

Ok, I cleared my Java cache & tried rebooting. Got further than earlier, but then got the BSOD which states something like "your pc has been shut down to prevent further problems"

I've attached an updated dump file
My System SpecsSystem Spec
30 Sep 2012   #5

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Thanks.

Quote:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
Code:
  1. Start Menu\Programs\Security\Kaspersky Internet Security 2012 Jamie-PC\Jamie:Start Menu\Programs\Security\Kaspersky Internet Security 2012 Jamie-PC\Jamie
Please replace Kaspersky with Microsoft Security Essentials
Microsoft Security Essentials - Free Antivirus for Windows
Make a full scan once downloaded, installed and updated
Removal tool for Kaspersky Lab products
Kaspersky does cause blue screen crashes on some systems

Run the system file checker and reboot if integrity violations are found:
SFC /SCANNOW Command - System File Checker

Run Disk Check for any errors on your hard disk for file system errors
and bad sectors on it
Disk Check

Then check for an update on your BIOS version
Code:
BIOS Version/Date	Hewlett-Packard F.04, 10/09/2009
Do these and let us know the results
We'll do more troubleshooting if the problems persist
My System SpecsSystem Spec
30 Sep 2012   #6

windows 7 home premium 64bit
 
 

Thanks,

Is Kaspersky definitely the cause? Or just a likely cause?

I've ran the state file checker. Not sure what it found though as when I came back to the pc, it was no longer running, but didn't appear to have rebooted as this web page was stil open.

I'm currently running the disk check. It's taking ages only on 21%
My System SpecsSystem Spec
30 Sep 2012   #7

windows 7 home premium 64bit
 
 

Ok, That's now finished, still got the BSOD.

Here's a new dump
My System SpecsSystem Spec
30 Sep 2012   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

Did SFC find violations?

Lets enable driver verifier to rule out buggy drivers.

Driver Verifier
Quote:
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in verifier and press Enter
- Select Create custom settings (for code developers) and click Next
- Select Select individual settings from a full list and click Next
- Select everything EXCEPT FOR Low Resource Simulation and click Next
- Select Select driver names from a list and click Next
Then select all drivers NOT provided by Microsoft and click Next
- Select Finish on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Driver Verifier - Enable and Disable


Verifier puts extreme stress on the drivers, bad ones will cause BSOD. If we change all those drivers we hope for no more BSODs, If you get no BSODs, then its not a driver and we look to hardware. With verifier on your computer may be a little laggy, but actually..its just doing its work.

Information
Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.

Quote   Quote: Originally Posted by Capt.Jack Sparrow View Post
Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
My System SpecsSystem Spec
01 Oct 2012   #9

windows 7 home premium 64bit
 
 

I'm not sure on SFC, when I came back to the PC, it was no longer running, but other windows were still open suggesting it had not rebooted. Should I run this again?

I created a Windows Defender offline disc last night & ran it. Did a full scan & it found no infections.

This morning the PC has booted ok. I am currently using it in normal mode. This is odd as it blue screen last night before the Defender scan.

Hopefully it is now ok but I will monitor it today. Would you recommend I still try the Driver verifier? Perhaps overnight?

I am confident the machine is free of malware, but I'm concerned there may still be a problem as I cannot see what we've done to fix it?
My System SpecsSystem Spec
01 Oct 2012   #10

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64Bit
 
 

You need to observe for a while.
Did you replace Kaspersky with MSE?
My System SpecsSystem Spec
Reply

 BSOD Page Fault in Nonpaged Area




Thread Tools



Similar help and support threads for2: BSOD Page Fault in Nonpaged Area
Thread Forum
Solved BSOD - Page fault in nonpaged area BSOD Help and Support
BSOD Page Fault in Nonpaged Area BSOD Help and Support
Solved BSOD - Page Fault In Nonpaged Area BSOD Help and Support
BSOD - Page Fault in Nonpaged Area? BSOD Help and Support
BSOD Page Fault in NonPaged Area BSOD Help and Support
Solved BSOD [page fault in nonpaged area] BSOD Help and Support
Page fault in nonpaged area Win 7 BSOD BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:27 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33