Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Random error messages 2nd fresh install

09 Oct 2012   #21
thebfm

Windows 7 Ultimate x64
 
 

Yeah I did that last night. Shortly before the crash that caused me to have to use my disk to get back into windows. but i had it running for a few hours prior to that.


My System SpecsSystem Spec
.
10 Oct 2012   #22
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Driver Verifier is designed to stress your drivers and force faulty ones to crash, it will also cause your system to run slower than usual.
Post the full crash reports when you get a couple of Driver Verifier enabled crashes, Run for 24 hours.
This will give us information on your drivers that we can use to find the cause.
If it crashes and won't boot, disable it in Safe Mode.

Run memtest86+ for 7 full passes, with all RAM cards installed.
Best to run overnight as depending on the amount of RAM you have may take several hours.
If you get any errors you can stop the test.
RAM - Test with Memtest86+
My System SpecsSystem Spec
10 Oct 2012   #23
thebfm

Windows 7 Ultimate x64
 
 

So I had a nice 4 hours of stability and let that go to my head so of course stuff had to act up. I was hit with a double bsod the 2nd was after boot while my startup programs were still loading then when it had the screen up to load in safe mode anytime i touched a key on my wireless logitech usb keyboard it caused a reset. even caps lock did it. it only loaded past that when i let the 30 seconds go by to autoselect the option. So thats a new one.

By the way I haven't already said it, but thank you to ANYONE that helps at all with this even if you just load the thread and go away without posting. Thanks for any effort given.

Edit: Also i had it reset my bios since it failed to load and that option was prompted and reminded me I guess I overclocked my memory? Its 1600 but my motherboard loads it at 1333 unless i set it as 1600 I had forgotten that. Also during the bsod madness it loaded a black screen with white text that mentioned something about checksum I didn't catch it enough to recall what was said it was just one line of text.
My System SpecsSystem Spec
.

10 Oct 2012   #24
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

What did you do to set the RAM at 1600MHz?
SPD setting in BIOS?

Your last crashes:
Code:
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Probably caused by : memory_corruption ( nt!MiLogPageAccess+dc )
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
IMAGE_NAME:  memory_corruption
FAILURE_BUCKET_ID:  X64_0x50_nt!MiLogPageAccess+dc
-------------------------------------------------------------------------------------------------------------------------------------------------
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+29712 )
DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
FAILURE_BUCKET_ID:  X64_0x50_VRF_nt!_??_::FNODOBFM::_string_+29712
Your crashes before these last two are the same as above.

Run memtest86+ for 7 full passes, with all RAM cards installed.
Best to run overnight as depending on the amount of RAM you have may take several hours.
If you get any errors you can stop the test and follow the testing procedure in the tutorial.
RAM - Test with Memtest86+

'checksum' may indicate file corruption.
Run a system file check - SFC /SCANNOW Command - System File Checker
Run it three times with re-boots after each run.

From your System Event Logs:
A few crashes that aren't showing up in your zip file.
Code:
Event[5112]:
  Log Name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 2012-10-08T21:06:32.000
  Event ID: 1001
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SKYNET-PC
  Description: 
The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000034
Usual causes: Insufficient physical memory, Indexing, Device driver
Possible RAM issue.


The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
Hard to tell the cause of this one without a crash dump.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a
STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory

Code:
Event[5545]:
  Log Name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 2012-10-08T21:58:57.000
  Event ID: 1005
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: SKYNET-PC
  Description: 
Unable to produce a minidump file from the full dump file.
This is also indicating a possible RAM/memory issue.
My System SpecsSystem Spec
10 Oct 2012   #25
thebfm

Windows 7 Ultimate x64
 
 

7 pass memtest found errors. pic included.

Edit: Forgot to mention that was with both sticks. So where do I go from here? Does this confirm memory or could it still be other things causing the memtest errors?
My System SpecsSystem Spec
11 Oct 2012   #26
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages (VDDNB Over Voltage) are.

Use Core Temp , to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

Follow the testing procedure in the tutorial.
RAM - Test with Memtest86+

Sometimes errors can be corrected by making RAM setting adjustments.
My System SpecsSystem Spec
11 Oct 2012   #27
thebfm

Windows 7 Ultimate x64
 
 

Ok here are screens of cpuz tabs. Ill update post with other stuff as i get it done in the coming minutes.

My voltages are all set to auto.

Also my motherboard has a program I always have up that monitors my temp and I have never seen this cpu go past 55C and i idle around 30-37C depending on the time of year.
My System SpecsSystem Spec
11 Oct 2012   #28
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Those motherboard (all motherboards) utilities are known to not give accurate information and well known to cause system instability and crashes.
I recommend that you uninstall them all.

Did you run the System File Checker?

There are free programs that will give you all the info you need and won't cause your computer to crash.
For CPU core temps: Core Temp
For CPU core temps and other info: HWiNFO64 system Information

I'll need to get this information before we can try the setting adjustments.
Quote:
Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages (VDDNB Over Voltage) are.
Download your motherboard manual: M4A77TD PRO
You need to select the VDDNB Over Voltage and change to 'Manual' to get the voltage reading, same with the other voltages.
When done, just exit your BIOS without saving, all the setting will be as they were before.
My System SpecsSystem Spec
11 Oct 2012   #29
thebfm

Windows 7 Ultimate x64
 
 

File checker ran all 3 results were clean.

I am not sure what I am doing with the voltage and what my manual was for I need more info. The overage stuff is auto all i can do with then is manually input numbers in a field there is no manual option itself.
My System SpecsSystem Spec
11 Oct 2012   #30
thebfm

Windows 7 Ultimate x64
 
 

Another crash while i was out.
My System SpecsSystem Spec
Reply

 BSOD Random error messages 2nd fresh install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Sound isn't working on fresh install of Win 7-several error messages
I just recently installed a fresh copy of windows on my recently installed SSD. I have an old HDD in this machine where my sound worked fine on that install of windows. Before in playback I had a "headset" and "speakers." I think those come with Realtek HD audio. I've installed the drivers for my...
Sound & Audio
Random BSOD even after a fresh re-install of Windows, Error 0x0000003b
Hey guys! I have been having an issue with my desktop ever since I moved 3 months ago. I recently did a fresh install of Windows 7 and I am still getting the same blue screen problem. So, it's obviously something hardware related, which I should have thought of earlier, but I can't quite figure out...
BSOD Help and Support
Random BSOD(different error). Fresh install!
Hi, Operating System: Win7 Home Basic (when it was bought it had a Windows 7 home basic installed) - Tried all from Win7 Starter to Win7 Ultimate => x32-x64. - Installation date: Few hours ago. - PC(aspire 7551G) age: 2/5 years 1st BSOD => few minutes after install
BSOD Help and Support
BSOD numerous different messages even after a fresh install of win7
So I've had my computer running fine for about a year and a half. No problems other than a really slow start time. I've always had a random stutter/freeze/looping audio problem that will last for a second and it wouldn't matter what I was doing. Would happen about once every three hours or so. ...
BSOD Help and Support
Random BSOD's with random error messages after a new setup
Hey! I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system. After installing Windows for the first time...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App