Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Random error messages 2nd fresh install

13 Oct 2012   #41
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

I think that crash may have been caused by the RAM, we might come back to it later.

Let me know how the voltage bumps go.


My System SpecsSystem Spec
.
13 Oct 2012   #42
thebfm

Windows 7 Ultimate x64
 
 

So far so good. Left my machine on while i slept its been on for 8 hours with no crash.
My System SpecsSystem Spec
13 Oct 2012   #43
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Good news.

Let me know if it's stable tomorrow.
My System SpecsSystem Spec
.

13 Oct 2012   #44
thebfm

Windows 7 Ultimate x64
 
 

I just had a crash. It mentioned running driver verifier at the top of the screen. I went through the steps to turn that back on. Maybe it was reset when i had to use a repair disk to get windows to boot earlier in the week. That or it was just a generic message that didn't care/check if I already had it going.
My System SpecsSystem Spec
13 Oct 2012   #45
thebfm

Windows 7 Ultimate x64
 
 

I just had a lock up that I had to reset manually and it would't post like before in the orange slots it would just cycle the harddrive and fans every 4-5 seconds i had to split my ram back into a1 b1 to get it to boot.
My System SpecsSystem Spec
14 Oct 2012   #46
Anthony

Microsoft Community Contributor Award Recipient

MS Windows 7 Professional 64-bit SP1
 
 

Probably caused by : hardware ( Rt64win7+9403f ) Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC: Update the driver Realtek

Keep us posted
My System SpecsSystem Spec
14 Oct 2012   #47
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

No new crash dump files in the last two zip files.

Take out your USB HUB, connect the wireless keyboard and mouse directly to the back of the computer.
Don't plug in the headset for now.

Did you bump the voltages?
Quote:
Let's bump the same voltages again.
Set your VDDNB Over Voltage to 1.250v
Set your Memory Over voltage to 1.65v (slightly above is ok)
Leave the DRAM Frequency at 1333MHz and the RAM cards in the orange slots.
Exit & Save Changes.
If you have these voltages set, run memtest86+ again.
Quote:
Run memtest86+ for 7 full passes, with all RAM cards installed.
Best to run overnight as depending on the amount of RAM you have may take several hours.
If you get any errors you can stop the test and follow the testing procedure in the tutorial.
RAM - Test with Memtest86+
If you get any errors follow the testing procedure in the tutorial.
Take one RAM card out, run Memtest86+ for 7 full passes, if there are no errors, remove that card, put the other card in the other colored slot, run Memtest86+ for 7 full passes, if no errors remove that card and put the other card in a different colored slot that you haven't tested yet.
Continue until all four RAM slots have been tested.
If you get any errors you can stop the test, make note of the slot, report here.
Continue with the other RAM card in a different slot.

You need to test for a bad RAM card and test for a bad RAM slot.
Be sure to note the slot and channel the tests are done with.
My System SpecsSystem Spec
14 Oct 2012   #48
thebfm

Windows 7 Ultimate x64
 
 

Yeah i upped the voltages after you posted that. I will remove my hub and run memtest again.
My System SpecsSystem Spec
14 Oct 2012   #49
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Sounds good.

Let us know the results.
My System SpecsSystem Spec
14 Oct 2012   #50
thebfm

Windows 7 Ultimate x64
 
 

Memtest came back clean. Needless picture included.
My System SpecsSystem Spec
Reply

 BSOD Random error messages 2nd fresh install




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Sound isn't working on fresh install of Win 7-several error messages
I just recently installed a fresh copy of windows on my recently installed SSD. I have an old HDD in this machine where my sound worked fine on that install of windows. Before in playback I had a "headset" and "speakers." I think those come with Realtek HD audio. I've installed the drivers for my...
Sound & Audio
Random BSOD even after a fresh re-install of Windows, Error 0x0000003b
Hey guys! I have been having an issue with my desktop ever since I moved 3 months ago. I recently did a fresh install of Windows 7 and I am still getting the same blue screen problem. So, it's obviously something hardware related, which I should have thought of earlier, but I can't quite figure out...
BSOD Help and Support
Random BSOD(different error). Fresh install!
Hi, Operating System: Win7 Home Basic (when it was bought it had a Windows 7 home basic installed) - Tried all from Win7 Starter to Win7 Ultimate => x32-x64. - Installation date: Few hours ago. - PC(aspire 7551G) age: 2/5 years 1st BSOD => few minutes after install
BSOD Help and Support
BSOD numerous different messages even after a fresh install of win7
So I've had my computer running fine for about a year and a half. No problems other than a really slow start time. I've always had a random stutter/freeze/looping audio problem that will last for a second and it wouldn't matter what I was doing. Would happen about once every three hours or so. ...
BSOD Help and Support
Random BSOD's with random error messages after a new setup
Hey! I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system. After installing Windows for the first time...
BSOD Help and Support
Random BSOD - Fresh install, fresh system
Hi. I have installed a whole new windows 7 pro x64. My new mobo an ASus p5e3 pro along with new ram pc12800 gskill 2x2 ddr3 (running in 1066mhz due to my q6600) Everythingi s running perfectly...except some random BSOD. 4 total this week. I have posted a pack of dump file in here, the last 4...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App