Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD's 0x116 and 0x9F when doing anything now.

06 Oct 2012   #11
Lenka

Windows 7 premium 64-bit
 
 

Uhhhh it wont let me istall winflash, because i suppose of another problem ive been experiencing.. Ever since i wiped my lappy, now i watched the whole damn process everything ran smoothly until AFTER the Asus update finished updating everything, it decided to cease to exist. Now ever since then ive been getting error messages requesting acpi atk0100 kernal mode driver and getting a P4G error claiming this is not an Asus lapop. Now when i try to install this, a message pops up telling me a similar thing. Oh and my computer runs fine in safe mode, is there something specific you want me to do?


My System SpecsSystem Spec
.
06 Oct 2012   #12
Lenka

Windows 7 premium 64-bit
 
 

by the way before i posted that one i was casually reading up on bios updating and trying to reply to you when it BSOD'd on me again... its like it senses me trying to fix the issue hahahha
My System SpecsSystem Spec
06 Oct 2012   #13
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

When you run Furmark do you see any artifacts, that is color splotches or anything abnormal in the animation?
The high frame count is showing the total frames displayed, FPS is frames per second. It will run faster without the furry donut.

I would try a graphics driver from you laptop's makers's site as laptops often have one modded specific to each model.
My System SpecsSystem Spec
.

09 Oct 2012   #14
Lenka

Windows 7 premium 64-bit
 
 

no artifacts at all, i made sure to keep an eye out for em, and i already updated my graphics card couple of days ago
My System SpecsSystem Spec
09 Oct 2012   #15
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Some hardware tests to run.



Hard drive(s), pick one for your HDD brand or use Seatools.
7 Free Hard Drive Testing Software Tools


For RAM, this will require memtest on a bootable CD or USB stick.
Memtest86+ - Advanced Memory Diagnostic Tool this should run for a minimum of 7 passes.
My System SpecsSystem Spec
11 Oct 2012   #16
Lenka

Windows 7 premium 64-bit
 
 

Thank you, but i really want to try and update my BIOS is there another method?
My System SpecsSystem Spec
11 Oct 2012   #17
Lenka

Windows 7 premium 64-bit
 
 

I have no idea what motherboard i have, tried looking cant find any info
My System SpecsSystem Spec
11 Oct 2012   #18
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I tried Googling the model number from your specs, used it on the ASUS site and got no results either. Do you have any supporting documents, manuals or disk with this laptop?
Download http://www.piriform.com/speccy it will give you, among many other things, you hardware info.
My System SpecsSystem Spec
12 Oct 2012   #19
Lenka

Windows 7 premium 64-bit
 
 

good news, updated my BIOS, got that ATPI or whatever asus thing, and i finally got the asus live update utility. Im now going to try and do those tests.

Unfortunately something tells me it will still be BSODing on me, but we shall see after these changes if it happens, ill keep you posted. Also do you think using a can of compressed air would help?
My System SpecsSystem Spec
13 Oct 2012   #20
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Blowing dust and dead mice out is always useful and can't hurt anything.
Let us know how it goes.
My System SpecsSystem Spec
Reply

 BSOD's 0x116 and 0x9F when doing anything now.




Thread Tools




Similar help and support threads
Thread Forum
BSOD when IDLE -- 0x9f
Have had BSOD's since last month. Please advise. Thanks
BSOD Help and Support
BSOD 0x116
A few days ago this started. I had overclocked my system in the past and had reset it to default. A few days before the issues started, I did another slight overclock and did not notice any overheating issues with either the CPU or GPU. I have yet to see any overheating issues while either gaming...
BSOD Help and Support
BSOD and USB hang 0x9F
I've been getting hangs when trying to shutdown/restart (from the start menu) as well the USB peripherals hang / unload / eject. Just recently after putting up with it for a while I've got a couple of bsod's (that are the same). Now I'm using the default driver from MS because my MB doesn't...
BSOD Help and Support
Win 8 RTM atheros 0x9f bsod
Windows 8 RTM Enterprise: Download Windows 8 Enterprise Evaluation With latest win8 specific driver (10.0.0.75) and with stock driver I get 0x9f power state BSOD's. 10.0.0.54 win7 driver might be OK. 10.0.0.75 win7 specific driver refuses to load (driver signing problem with modified inf...
BSOD Help and Support
Windows 7 BSOD 0x9f
I've been getting a BSOD every few days, usually while playing games such as Trine or Morrowind. They are all reported as DRIVER_POWER_STATE_FAILURE, and are usually to be 0x03. BlueScreenView tells me it's ntoskml.exe which doesn't help me figure out what's wrong. I'm using Windows 7 Home...
BSOD Help and Support
0X9F with pci.sys BSOD
Been getting BSOD on reboot. It's always a 0X9F and reading the dump it just says PCI.sys is the problem and that's where I get lost. Used the great SF Diagnostic Tool by Capt. Jack (thx Jack!) Attached are the files collected by SF Diagnostic Tool.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App