NEW asus system COMPLETE random bsod

ok i also have a new question... would 32 bit compared to 64 bit be an issue....? i already checked before purchase that the board and processor was 64 bit compliant.

znikotine said:

ok i also have a new question... would 32 bit compared to 64 bit be an issue....? i already checked before purchase that the board and processor was 64 bit compliant.

nevermind just blue screened lol. but the manual crash works with dv on ..... so im gonna try to get it to crash with dv on

ok i just got it to blue screeen with dv on with 32 bit installed im hoping this is the same thing if it is i can probably reproduce the same and get to the bottom of this through dumps. if this is so let me know so i can get to it right away

ok here is a new set of dumps the first 6 are on various uses the last 7 happened while i was sleeping dv is on and i was running in non safe mode ......so hopefully this will help

yes no maybe so are these useful or do i need to go another route

the lack of replies is discomforting i hope that im not just screwed gonna run some prime95 tests while i wait for more info

Arc said:

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {c0000006, 82a8b7d3, 8791f674, 8791f250}

Probably caused by : hardware_disk

Followup: MachineOwner
---------

1. Update your SSD firmware,
2. Reseat the sata and power.
3. Run chkdsk /f/r, following the option two of the tutorial Disk Check
4. Seatool for dos: SeaTools | Seagate download
   Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.

i dont have a ssd so follow the rest or is this for ssd drives only