Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD's on windowslogon/random

19 Oct 2012   #11
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

No problem. Keep us posted either way


My System SpecsSystem Spec
.
19 Oct 2012   #12
soulswiper

Windows 7 64bit home prem
 
 

Got some crashes, overnight weirdly dont get BSOD's anymore i just get black screens of evilness
My System SpecsSystem Spec
19 Oct 2012   #13
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Code:
STOP 0x00000109: CRITICAL_STRUCTURE_CORRUPTION  
Usual causes:  Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
BugCheck 109, {a3a039d89cbdd6bd, b3b7465eef3aa613, fffff800031890a8, 1}
Probably caused by : memory_corruption
Code:
STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP  
Usual causes:  Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack
BugCheck 7F, {8, 80050031, 6f8, fffff880012b9289}
Probably caused by : memory_corruption
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

RAM - Test with Memtest86+
Guide to using Memtest86+ - Geeks to Go Forums

Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
My System SpecsSystem Spec
.

19 Oct 2012   #14
soulswiper

Windows 7 64bit home prem
 
 

Ok thanks koolkat gonna run these memtests again just looked up guide haha
My System SpecsSystem Spec
19 Oct 2012   #15
soulswiper

Windows 7 64bit home prem
 
 

Hey koolkat, how long would 6x 2gb ram sticks take to test one at time? or an estimate

Also if i pass one stick fine, should i just pop in another or just clear them all to 8 passes?
My System SpecsSystem Spec
19 Oct 2012   #16
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Quote   Quote: Originally Posted by soulswiper View Post
Hey koolkat, how long would 6x 2gb ram sticks take to test one at time? or an estimate

Also if i pass one stick fine, should i just pop in another or just clear them all to 8 passes?
That's gonna take long but yes. You should as both the dumps and usual causes say that theres a problem with memory
My System SpecsSystem Spec
19 Oct 2012   #17
soulswiper

Windows 7 64bit home prem
 
 

Ok thanks i hope this finds some errors on the sticks, also reverted my bios to factory could been something related in there aswell?
My System SpecsSystem Spec
20 Oct 2012   #18
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

BIOS to factory? Not sure what you mean?
My System SpecsSystem Spec
20 Oct 2012   #19
soulswiper

Windows 7 64bit home prem
 
 

i had memory overclocked abit, so i reset the bios to fail safes


and im on the last ram stick now none of the others error'd
My System SpecsSystem Spec
20 Oct 2012   #20
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Oh yup, you should do that. No overclocking please.
My System SpecsSystem Spec
Reply

 Multiple BSOD's on windowslogon/random




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random Multiple BSOD
Hello, I am seeking assistance with an issue which started at the start of this year. I have been experiencing random BSOD crashes while gaming, browsing the internet, doing work on MS Word and a range of other situations. I have tried to keep track of the crash codes, some of which are posted...
BSOD Help and Support
Random Multiple BSOD
Hi, i just bought a new pc few days ago and i kept getting BSOD, I've reinstalled my drivers, updating it, and even reinstalling my OS but the BSOD is still showing up until now. I really have no idea what the problem is with my pc, the only thing i know is the BSOD messages is not always the same....
BSOD Help and Support
Multiple BSOD's - Seems Random
Just recently finished my PC build but have gotten numerous BSOD's since booting it up for the 1st time yesterday. Really driving me mad at this stage. They seem to come in at random, couple happened while using the restore function on Steam. One or two happened while updating windows and some...
BSOD Help and Support
Multiple BSOD at Random Times with Multiple Drivers Identified
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and...
BSOD Help and Support
Multiple Random BSOD's
Hi guys, i tried to run perfmon and couldnt get a html report so i took some snips of the errors i could see, in the images attached. Also attached is the zip folder requested. I have been having random bluescreens for the last 5 or 6 months, mostly system service errors i believe. I am running...
BSOD Help and Support
Multiple and random BSOD
i upgraded a friends rig 2 weeks ago to a i3 530, gigabyte mobo, OCZ 10666 2x2gb, win7 home prem. 64bit OEM, etc. his rig worked fine a few days and then he started getting random BSOD, so i messed around with the ram(moved them to other slots etc.) since i have heard of this with other people...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App