Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB

08 Oct 2012   #1
M3T1V13R

Windows 7 Home Premium 64bit
 
 
BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB

I've been using ubuntu on a Live USB to compile some of my C homework. I disabled wireless within ubuntu. When I restarted into Windows I received an error about a hardware switch being turned off and was unable to use fn + f10 to turn it back on. I restarted my pc and went into the live usb again. When I went back into windows the wireless was available, but my computer BSOD's almost immediately after logging in.

I am able to boot into SafeMode with networking, so I'm not sure if the wireless if the actual issue or a related event at all.

I have run chkdsk /r, memcheck, and have rolled back and then reinstalled the new build of my graphics driver. In BlueScreenView I see ntoskrnl.exe and PSHED.dll listed as the top two events, and other threads said that PSHED.dll was graphics related, but that did not ultimately solve the issue.

I've attacked the MiniDump files. I have too much ram for a full dump. I've also attached the SF Results.

Thanks for any help that you may be able to offer!


My System SpecsSystem Spec
.
08 Oct 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Welcome aboard.

Here is your actual problem:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

REGISTRY_ERROR (51)
Something has gone badly wrong with the registry.  If a kernel debugger
is available, get a stack trace. It can also indicate that the registry got
an I/O error while trying to read one of its files, so it can be caused by
hardware problems or filesystem corruption.
It may occur due to a failure in a refresh operation, which is used only
in by the security system, and then only when resource limits are encountered.
Arguments:
Arg1: 0000000000000001, (reserved)
Arg2: fffff8a000024370, (reserved)
Arg3: 0000000001643000, depends on where Windows bugchecked, may be pointer to hive
Arg4: 0000000000000374, depends on where Windows bugchecked, may be return code of
    HvCheckHive if the hive is corrupt.
In such a situation, you first boot into Advanced Boot Options, choose "last known good configuration" and hit enter, see if it boots or not.

In a deeper analysis of your dump, it indicates Kaspersky :
Code:
fffff880`08f4e838  fffff880`0471a7bfUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
 klif+0x267bf
When we see an Antivirus is there behind the crashes, we suggest to uninstall it and use Microsoft Security Essentials - Free Antivirus for Windows.

But, as the Registry is already corrupted, uninstalling Kaspersky will not bring it back to normal, it just will protect the system from getting more corrupt.

If both of those options fail, do SFC /SCANNOW : Run in Command Prompt at Boot

If it also failed, do a Clean Install Windows 7

Let us know the results.

EDIT: Uninstall the following programs:
  • Catalyst Control Center
  • DAEMON Tools Lite
  • Defraggler
  • MSI Afterburner
Free up the startup. (you have 30 programs in startup)

  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept the restart.
My System SpecsSystem Spec
10 Oct 2012   #3
M3T1V13R

Windows 7 Home Premium 64bit
 
 

I was unable to boot into "Advanced Boot Options," but in trying to do so, I found a startup repair utility. My computer seems to be working now. I've restarted a few times without error.
My System SpecsSystem Spec
.

10 Oct 2012   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Nice to know that it is working properly now
Whatever, dont forget to follow the last two points at all.
My System SpecsSystem Spec
Reply

 BSOD on Boot ntoskrnl.exe+7f1c0 After Using Ubuntu Live USB




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSODs after first boot of the day: 0x00000109 / ntoskrnl.exe+7f1c0
Hello, I have had two BSODs this week; one on Monday and the other one today, Thursday. Both occured within 30 minutes after Windows had been started (resumed from hibernation) for the first time that day. The same thing happened a few months ago. I'm beginning to see a pattern. :) Other...
BSOD Help and Support
bsod driver_power_state_failure ntoskrnl.exe+7f1c0
My wife's Sony Vaio (VPCEE41FD) laptop has been acting up over the last few nights. It would hang up on shutting down, taking sometimes over an hour+ Just tonight it decided to BSOD stating driver_power_state_failure ntoskrnl.exe+7f1c0 If I recall, I think this happened about a month ago as...
BSOD Help and Support
BSOD in ntoskrnl.exe+7f1c0 on new Laptop Win 7 64 bit
Hello, I'm having blue screen errors on my Laptop which is only a couple weeks old and otherwise running fine. The BSODs aren't that many, maybe once a week while using the computer daily. Once it apparently was caused by me plugging in my USB mouse. Already did a memtest and chkdsk without...
BSOD Help and Support
BSOD without reason? ntoskrnl.exe 7f1c0
My computer working always good most 1 bsod coming without reason? on a day i seeing not reason for this pc have not many load ram test with memtest working over 8 houres without problems here bsod logs anybody have idea?
BSOD Help and Support
BSOD f4, ntoskrnl.exe-7f1c0
I have been getting a BSOD in my fresh Windows install, I'm running Windows 7 Pro x64 (MSDNAA). I had done a clean install after I got a couple of BSOD f4 but now I'm still getting the same BSOD! I've already collected some dump with and without running Driver Verifier. Before clean install I...
BSOD Help and Support
BSOD ntoskrnl.exe-7f1c0 while idling
I have been getting a BSOD in my newly installed system and ive included the files in this post as you asked for before posting :) I am running Win 7 x64 OEM i bought it together with the parts for my system which you can see in my signature. it is only nearly 4 weeks old, i did put the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App