SMART Error for the hard drive

Hello, I joined here recently and i am more or less a novice at this.I recent got this SMART error and windows told me that my hard drive might fail. After searching online,, i was suggest to download HDDscan .After using it, it shows me this
HDDScan S.M.A.R.T. Report

Model: TOSHIBA MK6476GSX
Firmware: GS001C
Serial: 61T2P1UWT
LBA: 1250263728

Report By: HDDScan for Windows version 3.3
Report Date: 10/10/2012 10:41:36 AM

Num Attribute Name Value Worst Raw(hex) Threshold

001 Raw Read Error Rate 100 100 0000000000-0000 050

002 Throughput performance 100 100 0000000000-0000 050

003 Spin Up Time 100 100 0000000000-07F0 002

004 Start/Stop Count 100 100 0000000000-02F4 000

005 Reallocation Sector Count 010 010 0000000000-0736 010

007 Seek Error Rate 100 100 0000000000-0000 050

008 Seek time Perfomance 100 100 0000000000-0000 050

009 Power-On Hours Count 091 091 0000000000-0E62 000

010 Spin Retry Count 115 100 0000000000-0000 030

012 Device Power Cycle Count 100 100 0000000000-02F1 000

183 SATA Downshift Error Count 100 100 0000000000-0000 001

184 End To End Error Count 100 100 0000000000-0000 097

185 Head Stability 100 100 0000000000-FFFF 001

187 Reported Uncorrectable Error 100 100 0000000000-0000 000

188 Reported Command Timeouts 100 099 0000000000-0001 000

189 High Fly Writes 100 100 0000000000-0000 001

190 Airflow Temperature 052 046 48 C 040

190 Airflow Temperature Minimum 052 046 45 C 040

190 Airflow Temperature Maximum 052 046 48 C 040

191 G-sense Rate/Servo tracking 100 100 0000000000-00E2 000

192 Emergency Retract Count 100 100 0000000007-0007 000

193 Load/unload Cycle Count 098 098 0000000000-63DB 000

196 Reallocation Event Count 100 100 0000000000-0106 000

197 Current Pending Errors Count 100 100 0000000000-0000 000

199 UltraDMA CRC Errors 200 200 0000000000-0000 000

what is this? can someone help me with this?

Judging by the data presented and looking at the product's website, looks like you passed. How old is the HDD?

It is just under one year. It came with my refurbish hp dv6 laptop.

I would start with a CHKDSK (open My Computer, right click on the drive, select properties, go to the tools tab and click on the 'Check now' under Error checking). It will probably tell you that it can't do it now and ask you if you want to check on the next reboot (click 'Yes' and reboot). this will run the ancient but effective hard disk checking utility. If errors are found, it will try to fix them. If no errors are found, continue the boot. Have you had any additional errors?

it found no error and nothing has changed for the last time i posted.

have you gotten any more SMART errors from Windows?

no i have not as yet. the sector relocation value has not change yet also

Any other errors or problems? Does the computer function correctly?

so far its normal. nothing has changed. thanks for your asistance

OK, that's great. You're welcome.