Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x69 IO1 Initizialtion Error - Seems to be the least understood..

11 Oct 2012   #1
KC1911

Windows 7 Ultimate
 
 
BSOD 0x69 IO1 Initizialtion Error - Seems to be the least understood..

Hi All,

Very frustrating BSOD, while not installing anything new, changing drivers or anyghing I started to get BSODs.

First on one my two on board net cards stopped working, literally would not load the net at all. Therefore I swapped to my other internal net socket and the net worked for a while untill the above BSOD came along and now it will not boot, after CHKDSKs. reg repairs etc.

The other annoying thing is I can't try system restore as my drive is a U320 SCSI and amazingly Windows startup repair will not recognise my drivers even though the same drivers work within Windows!

Very frustrating, any advice will be greatly appreciated.

Attached is the last NETBTLOG and MINIDUMP.

Thx guys.


My System SpecsSystem Spec
.
12 Oct 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Welcome aboard.

Code:
Unable to load image \SystemRoot\system32\DRIVERS\mv61xx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mv61xx.sys
*** ERROR: Module load completed but symbols could not be loaded for mv61xx.sys
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {80000003, 8d6a709e, 843359f0, 0}

*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
Probably caused by : mv61xx.sys ( mv61xx+1c09e )

Followup: MachineOwner
---------
From the bugcheck analisys, we are having two things.
  • stpd.sys: Used by Daemon Tools or Alcohol120%, as a virtual drive emulator driver. Most well knows cause of BSOD in windows7. Uninstall the either program.
  • mv61xx.sys: Marvell Thor Windows Driver. Also a known problem causer, Usually people avoid Marvell drivers, as they are poorly written. You may either update your drivers from Marvell - Support, or uninstall those, use windows drivers only.

Moreover, you have an obsolitely old display driver installed.
Code:
 lmvm nvlddmkm
start    end        module name
98219000 98bb55a0   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sat Oct 16 22:37:56 2010 (4CB9DBEC)
    CheckSum:         009A1A8C
    ImageSize:        0099C5A0
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Download the latest drivers from Drivers - Download NVIDIA Drivers.

Let us know the results.
My System SpecsSystem Spec
12 Oct 2012   #3
KC1911

Windows 7 Ultimate
 
 

Hi,

Thanks a lot for your response.

As the system is non booting I have been unable to uninstall those drivers unless you know of a way to do this?

Also I could not find stpd.sys so not sure there?

I booted into a rescue environment and changed the mv driver file extensions to bak instead of sys so they wouldn't load and I disabled
the onboard marvel network adapters in the bios so they wouldn't load.

However the system still won't load have you any advice on what to try??

Thanks a lot.
My System SpecsSystem Spec
.

12 Oct 2012   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

My System SpecsSystem Spec
12 Oct 2012   #5
KC1911

Windows 7 Ultimate
 
 

Thanks again Arc.

I would have completed the steps outlined in the tutorial already if was able to access my drive.

My problem is that my drive is a SCSI drive on a adaptec card and windows will not accept any of adaptecs drivers when in startup repair, so I can't SFC scan or Startup Repair which is frustrating.

So not sure what to try now!
My System SpecsSystem Spec
12 Oct 2012   #6
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Can you boot into Safe Mode ? If so, you may uninstall the adaptec drivers in safe mode, from device manager. In the next reboot the generic drivers will be loaded automatically.

Then you try to boot, or repair the boot error, IMO.
My System SpecsSystem Spec
12 Oct 2012   #7
KC1911

Windows 7 Ultimate
 
 

No tried all boot options can't get into the original drive at all

Not sure where I can go?

Can I remove entries to them through the registry hive loaded from inside a rescue cd?
My System SpecsSystem Spec
12 Oct 2012   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by KC1911 View Post
No tried all boot options can't get into the original drive at all

Not sure where I can go?

Can I remove entries to them through the registry hive loaded from inside a rescue cd?
At first make it sure that the 100 MB hidden system reserved partition is marked as active.
Partition - Mark as Active

Follow either the Method two or the method three.

Then run Startup Repair for three separate times, with restarts in between every single run.

Startup Repair - Run 3 Separate Times
My System SpecsSystem Spec
Reply

 BSOD 0x69 IO1 Initizialtion Error - Seems to be the least understood..




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Memory Management Error, didn't catch error code.
Hello again, BSOD Forum, I've been free of frequent BSODs since earlier this year. Recently I must have installed some software or something else must have gone wrong, because the blue screens are back. Here is what happened earlier this year, in case anyone needs any further context: ...
BSOD Help and Support
Waking from Sleep understood but wont go back to sleep
I setup 2 Media center PC's and have them both goto sleep when not being used. They wake up in the middle of the night due to mcupdate_scheduled which I understand and know how to turn off. My problem is I want to leave it the option on and have the computers go back to sleep after the update is...
Media Center
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support
BSOD. error Custom built computer. error unknown between 0 or 1077...
Well I built this computer in september of 2011 everything was running great no problems at all until today. I left it on and went to the store came back and BSOD. My computer restarted before I could write down any information "Error code" system restore said it was a "unknown error" which...
BSOD Help and Support
I thought I understood Windows licensing, but this has me a bit stuck
Hi all, here's the deal. I'm upgrading hardware, including the MB. I'm also wanting to install Win 7 Professional Upgrade on the new hardware. On the current system we have: XP Pro (OEM but it's transferable of course) Win 7 64-bit Premium OEM There is also an OEM version of Vista 64-bit...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App