Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After replacement of motherboard due to spillage


13 Oct 2012   #1

Windows 7 Pro 64bit
 
 
BSOD After replacement of motherboard due to spillage

Hi, I have been experiencing a number of random BSOD not long after my screen, motherboard, and keyboard due to a bad spillage. At first, no problem appeared but then BSOD starts popping up, is this related? and after the BSOD when windows has started up (logged into computer), a blank orange screen appears for about 10 secs and the boot up song plays before I can use the computer. I have managed to take a picture of the BSOD and the orange screen. I hope you guys can help me, Thank you in advance .

Edit: I can't seem to be able to post the pic as it is too large, but here is what it said, "worker_thread_returned_at_bad_irql", and, **STOP: 0x000000E1 (0xFFFFF8000378D560, 0x0000000000000002, 0xFFFFFA801B17D760, 0xFFFFFA801B17D760). I hope this can help

My System SpecsSystem Spec
.

13 Oct 2012   #2
Microsoft MVP

64-bit Windows 8.1 Enterprise
 
 

Hello wolfhound, and welcome to Seven Forums.


Please read the instructions below and post back with the needed information if able. Hopefully some will be able to help soon afterwards.


Blue Screen of Death (BSOD) Posting Instructions
My System SpecsSystem Spec
13 Oct 2012   #3

Windows 7 Pro 64bit
 
 

I was unable to gather the files using SF Diagnostic Tool and this error comes up


Code:
 
See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.UnauthorizedAccessException: Access to the path 'C:\Windows\Minidump' is denied.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalGetFileDirectoryNames(String path, String userPathOriginal, String searchPattern, Boolean includeFiles, Boolean includeDirs, SearchOption searchOption)
at System.IO.Directory.GetDirectories(String path, String searchPattern, SearchOption searchOption)
at System.IO.Directory.GetDirectories(String path)
at Microsoft.VisualBasic.FileIO.FileSystem.DirectoryNode..ctor(String DirectoryPath, String TargetDirectoryPath)
at Microsoft.VisualBasic.FileIO.FileSystem.FxCopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryPath, String targetDirectoryPath, Boolean overwrite)
at Microsoft.VisualBasic.FileIO.FileSystem.CopyOrMoveDirectory(CopyOrMove operation, String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite, UIOptionInternal showUI, UICancelOption onUserCancel)
at Microsoft.VisualBasic.MyServices.FileSystemProxy.CopyDirectory(String sourceDirectoryName, String destinationDirectoryName, Boolean overwrite)
at WindowsApplication2.Form1.Button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
 
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Fra...7/mscorlib.dll
----------------------------------------
SF Diagnostic Tool
Assembly Version: 1.0.0.0
Win32 Version: 5.0.0.3
CodeBase: file:///C:/Users/Lyon%20Suteo/Deskto...ostic_Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...isualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5460 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...dows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5462 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...em.Drawing.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...figuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...System.Xml.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL...e.Remoting.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
My System SpecsSystem Spec
.


13 Oct 2012   #4

Windows 7 Pro 64bit
 
 

Attachment 236455

I have managed to solve the problem, here are the files.
My System SpecsSystem Spec
14 Oct 2012   #5
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Hello XwolfhoundX.

here is what your crash dump says:
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck E1, {fffff800037d8560, 2, fffffa800f8618f0, fffffa800f8618f0}

Probably caused by : ntkrnlmp.exe ( nt!IopProcessWorkItem+0 )

Followup: MachineOwner
ntkrnlmp.exe cannot be the cause of the crash, it must be something else.

Carrona.org says :
STOP 0x000000E1: WORKER_THREAD_RETURNED_AT_BAD_IRQL Usual causes: Device driver

In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
14 Oct 2012   #6

Windows 7 Pro 64bit
 
 

After using the verifier, I restarted my computer and there was an error message saying something cant be executed but im not sure. Shortly afterwards, the laptop crashes im not sure whether this is a BSOD as I left my laptop unsupervised. Then the laptop was unable to boot windows unless if I restore it to an earlier point. But I will provide you with the crash dump, Attachment 236481
My System SpecsSystem Spec
14 Oct 2012   #7
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

The crash is caused by Bigfoot Networks Bandwidth Control Wireless NDIS Light Weight Filter driver.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C4, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\bflwfx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for bflwfx64.sys
*** ERROR: Module load completed but symbols could not be loaded for bflwfx64.sys
Probably caused by : bflwfx64.sys ( bflwfx64+55d8 )

Followup: MachineOwner
---------
It is somehow old.
Code:
 kd> lmvm bflwfx64
start             end                 module name
fffff880`02e28000 fffff880`02f7d000   bflwfx64 T (no symbols)           
    Loaded symbol image file: bflwfx64.sys
    Image path: \SystemRoot\system32\DRIVERS\bflwfx64.sys
    Image name: bflwfx64.sys
    Timestamp:        Thu Mar 10 20:38:25 2011 (4D78E969)
    CheckSum:         0001B9EF
    ImageSize:        00155000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to update it from Killer Gaming :: Support :: Driver Downloads.

Let us know the results.
My System SpecsSystem Spec
14 Oct 2012   #8

Windows 7 Pro 64bit
 
 

Well this sucks, I followed the instructions to download the new driver by uninstalling the old one, but now the new driver is unable to detect my wireless card and simply said that there is no supported hardware in my system even if I tried downloading the driver direct from my laptop provider, dell. But even after uninstalling the driver, I experienced another BSOD. Attachment 236526
My System SpecsSystem Spec
14 Oct 2012   #9
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

You need to run verifier again .... for sure. This dump is totally silent about any reason.
My System SpecsSystem Spec
14 Oct 2012   #10

Windows 7 Pro 64bit
 
 

So, I have tried the verifier again and the system was unable to reboot afterwards. Had to restore it, I hope the crash dump is still not redundant.Attachment 236537
My System SpecsSystem Spec
Reply

 BSOD After replacement of motherboard due to spillage




Thread Tools



Similar help and support threads for2: BSOD After replacement of motherboard due to spillage
Thread Forum
BSOD after laptop motherboard replacement 0x000000c2 BSOD Help and Support
Solved Replacement Motherboard--Do I need to reinstall OS? Installation & Setup
Trying to decide on new Motherboard for replacement 1155. Hardware & Devices
BSOD ntoskrnl.exe - Since replacement of motherboard BSOD Help and Support
Solved ASUS motherboard replacement Installation & Setup
Motherboard with replacement BIOS Hardware & Devices
Solved Replacement Motherboard Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:20 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33