Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD during boot or Windows logo, TCPIP.SYS issue???

16 Oct 2012   #11
itsadizasta

Windows 7 Ultimate x64
 
 

Ok so I tried to install a clean copy of windows and now it can't get past the windows logo. So installation went fine, until the last part, "Completing Installation" and after it restart from there, when it tries to boot up windows for the first time, it crashes. I also tried to do several installations with drivers...same results.

I read some posts about the k9a2 platinum sb600 and promise t3 drivers needing update. Also, maybe I should revert bios back to 1.8...


My System SpecsSystem Spec
.
17 Oct 2012   #12
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hello mate, during installation, have you followed this method? Clean Install Windows 7? Have you formatted the existing C drive and then installed windows fresh?

If so, how far the installation went, as per the tutorial? Was the step 10 passed?

In this case only, try Startup Repair, for three separate times, with restart after every single run.

Otherwise, install it again! Follow the installation guide, Format the existing C Drive totally.
My System SpecsSystem Spec
17 Oct 2012   #13
itsadizasta

Windows 7 Ultimate x64
 
 

Yeah it crashes on step 10. I'm running 2nd time startup repair now, and Windows could not detect a problem so far. It says windows cannot repair this computer automatically...
My System SpecsSystem Spec
.

17 Oct 2012   #14
itsadizasta

Windows 7 Ultimate x64
 
 

Alright update!

So I did the repair 3 time like you said and also I followed some of the troubleshooting tips on this thread

http://www.sevenforums.com/crashes-d...air-0x490.html

And so far I'm able to install sp1, got past the "installing updates 30%" and now it's been on the shutdown phase for over 5 min... I think it's stuck. I left my house with it like that. I will see if it restarted when I get back home.
My System SpecsSystem Spec
17 Oct 2012   #15
itsadizasta

Windows 7 Ultimate x64
 
 

Back home now and I had to restart the computer manually because it won't shutdown. Booted up normally but I had to restart because I installed MSE. That gave me 3 bsods but nothing about tcpip. Maybe that is fixed... I will restart a couple more time and post the dump file if I get anymore bsods.
My System SpecsSystem Spec
18 Oct 2012   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

OK, update the situation to us regularly
My System SpecsSystem Spec
18 Oct 2012   #17
itsadizasta

Windows 7 Ultimate x64
 
 

Ok I got some pretty bad BSODs. First boot started fine. I tried to run BF3 and it crashed right before the game was about to show the menu. That error pointed to AODDriver4.1, which I removed afterwards. Then a whole series of bsods started. I ran chkdsk /f /r and no errors were found. Could you take a look at it for me please? I might have to reinstall again.
My System SpecsSystem Spec
18 Oct 2012   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {1904fb, fffff88009de5f08, fffff88009de5760, fffff8800122b690}

Probably caused by : Ntfs.sys ( Ntfs!NtfsRaiseStatusInternal+34 )

Followup: MachineOwner
---------
  1. If you are using a SSD, update the firmware.
  2. Reseat the sata and power.
  3. Run chkdsk /f/r, following the option two of the tutorial Disk Check
  4. Seatool for dos: SeaTools | Seagate download
    Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
Let us know the results.
My System SpecsSystem Spec
18 Oct 2012   #19
itsadizasta

Windows 7 Ultimate x64
 
 

So I resat the sata and power, and the firmware is up to date. I ran chkdsk and seatool, both passed with no errors.
My System SpecsSystem Spec
19 Oct 2012   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Update us the latest situation.

Sometimes the Ntfs issue resolves running chkdsk. We are to see if it is still there or not, after performing those checks.
My System SpecsSystem Spec
Reply

 BSOD during boot or Windows logo, TCPIP.SYS issue???




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on boot after Windows logo. Cause: ntoskrnl.exe ( nt+371610 )
Hello. I'm getting a BSOD on boot, immediately after the flying Windows logo (before login screen). The BSOD flashes on the screen for a second, and then the computer reboots. I'm running Windows 7 64 bit. This problem came out of nowhere as I've been running my PC flawlessly for years. ...
BSOD Help and Support
BSOD's after adding RAM [ tcpip.sys ] [ error:tcpip+7a6cc ]
Bsod's started since i added a 4gb ddr3 RAM(1333MHZ ddr3 corsair single stick) to my board which already has 2 more sticks of 2gb each(1333MHZ, ddr3 , kingston) They happen every few hours... I reinstalled(removed and installed) network driver thrice.(didnt reboot the system though) I...
BSOD Help and Support
Windows logo key issue
Hi all, I am having an issue with my windows logo key not working. I have done many searches and have yielded nothing that would be a solution. I don't know if there is a turn on/off or if a known program disables it or not. I am running Windows 7 Home Premium 64-bit, any help would be greatly...
General Discussion
Can't boot after chkdsk. BSOD 0xED after the windows 7 logo.
Hey. Okay.. My situation is my laptop was very VERY slow and i kept getting message on every program i opened like this: "Internet Explorer has stopped working." "Google.com has stopped responding." "Skype has stopped working." etc.. I figured it was a software/os issue so i re-installed...
BSOD Help and Support
Windows 7 Boot Logo
Hi all... Is there any way by which we can change the Boot logo which comes like animated while Windows 7 starts. No disrespect to Windows but m bored of seeing that logo.... Thanks
General Discussion
Stuck at the Windows logo during first boot
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App