Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD ntoskrnl.exe 64bit

19 Oct 2012   #11
rapstyle

windows 7 ultimate 64 bit
 
 

Another BSOD now
here the files


My System SpecsSystem Spec
.
19 Oct 2012   #12
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Code:
STOP 0x0000001A: MEMORY_MANAGEMENT  
Usual causes:  Device driver, memory, kernel
BugCheck 1A, {41201, fffff68000372840, 5ad000093d682005, fffffa800b126010}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+136f2 )
Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
My System SpecsSystem Spec
21 Oct 2012   #13
rapstyle

windows 7 ultimate 64 bit
 
 

I have 2 ram modules and i have tested both individually on 2 of 4 slots I use the most (the second and the fourth on the right side of the cpu) and I haven't got any error.
Now I'm going to test them together but I think they will not generate any problem.
What else could it be? Have you got any idea?
My System SpecsSystem Spec
.

21 Oct 2012   #14
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Test it that way finally and let us know if you're getting more BSODs.
My System SpecsSystem Spec
23 Oct 2012   #15
rapstyle

windows 7 ultimate 64 bit
 
 

memtest give me 0 errors.
pc is on since this morning (6 hours) but only now it give me 3 bsod in 5 minutes.
i don't know what is the problemi in this computer.
My System SpecsSystem Spec
23 Oct 2012   #16
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

I will take a look at them soon.
Did you uninstall the programs I listed in my first post? Did you make full scans with the new security programs?
Run this tool and delete anything it finds:
My System SpecsSystem Spec
23 Oct 2012   #17
rapstyle

windows 7 ultimate 64 bit
 
 

yes, I unistall comodo (now I have mse and windows firewall), virtu and update the ati drivers and the network drivers.
the antirootkit find 0 threads
My System SpecsSystem Spec
23 Oct 2012   #18
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Thanks.

Time for Driver verifier, enable for 36 hours, and give me all the dumps you get with it while enabled.
My System SpecsSystem Spec
23 Oct 2012   #19
rapstyle

windows 7 ultimate 64 bit
 
 

ok, perfect!
Thanks for the support
My System SpecsSystem Spec
23 Oct 2012   #20
rapstyle

windows 7 ultimate 64 bit
 
 

after active Driver Verifier I reboot the computer.
Now it freeze when load the destkop.
In Safe Mode it works.
My System SpecsSystem Spec
Reply

 BSOD ntoskrnl.exe 64bit




Thread Tools




Similar help and support threads
Thread Forum
BSOD Windows 7 64bit PSHED.dll + ntoskrnl
Hi guys, Starting to get really upset with my new PC. I'm not a complete noob on computers (don't consider me to be a expert either though) and I've been trying several things to resolve my BSOD's. This PC is now 2 months old and I think I've had like at least 30 BSOD's during this time...
BSOD Help and Support
BSODís following recent W7 64bit Clean Install Ė possible ntoskrnl.exe
Hi all, I am hoping that someone can shed some light on my recent BSOD problems. A couple of weeks ago I did a clean install of Windows 7 (previously had Windows XP). Over the past week I have received several BSOD’s (see attached dumps). The two most recent BSOD’s happened when I was...
BSOD Help and Support
Sparse BSOD 0x00000124 (hal.dll+12a3b, ntoskrnl.exe+75bc0) Win7-64bit
I bought my computer last year 7/27/2013. Custom build. Everything was working fine until January 20th this year. I experienced my first BSOD on this machine. I've tried rolling back graphics drivers which were the only ones I had installed recently, and it didn't help because 4 days later the same...
BSOD Help and Support
Ntoskrnl.exe 0d1 and 01a BSOD Windows 7 (64bit)
I've occassionally be getting BSOD (either 01a or 0d1) but these are happening more frequently and I know something is wrong. I have attached my logs from SF_Diagnostic_Tool.exe to this post, as well as a screenshot from WhoCrashed, BlueScreenView, CPUZ and Intel Driver Update Utility. From...
BSOD Help and Support
BSOD Win7 Pro 64bit - ntoskrnl.exe??
Hi, Lately I've build new system and almost from begin have some problems with BSOD. First was solved by rising voltage for my RAM. and evrything was OK. But yesterday I try tu update my Windows, and when instalation (after downloading and reboot) rach 35% first BSOD appeard ;/ and then was...
BSOD Help and Support
Random BSOD on Win 7 64bit.Probable cause: ntoskrnl.exe
Hi, I am running Windows 7 HP 64-bit and I have gotten 5 random BSOD's while being on the internet. I have opened the dump files and 4 of them say that probable cause is: ntoskrnl.exe ( nt+69063 ). I have attached a .rar file with the 5 dump files. Thank you, Edgar
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 08:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App