Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when entering sleep mode NDIS.Sys

20 Oct 2012   #1
Shammon22

Windows 7 ultimate x64
 
 
BSOD when entering sleep mode NDIS.Sys

Hello everyone, I have been reading these forums for the past week and none of them have solved my problem. Currently I am on Windows 7 Ultimate x64. I have just installed a new wireless network adapter. Previous to that I had installed an older card from Belkin (F5D7000) Which started my blue screen errors. The card was not win 7 compatible so I downloaded a Ralink RT2500 driver to run it. Which worked at the cost of BSOD errors. I've run system restores, tried deleting drivers, and uninstalling anything with belkin on it. Currently in my system I have installed a Netis WF-2113 Wireless network adapter. Which is PCIe, where as the Belkin was just PCI. I bluescreen whenever I enter sleep mode.

The computer itself is less than a year old, 1tb hdd, 16gb ddr3 ram, 1gb Evga 560ti gpu, sabertooth 990fx motherboard, and an 8 core amd bulldozer 3.1ghz Processor

Any help would be greatly appreciated. Thank you.


My System SpecsSystem Spec
.
20 Oct 2012   #2
Shammon22

Windows 7 ultimate x64
 
 
updated zip

Sorry, was a little hasty in posting that first zip.
My System SpecsSystem Spec
21 Oct 2012   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Welcome aboard.
It is caused by Atheros JumpStart wireless API, jswscimdx.sys.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff880014d16a0, 2, 8, fffff880014d16a0}

Unable to load image \SystemRoot\system32\drivers\ndis.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ndis.sys
*** ERROR: Module load completed but symbols could not be loaded for ndis.sys
Unable to load image \SystemRoot\system32\DRIVERS\jswscimdx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for jswscimdx.sys
*** ERROR: Module load completed but symbols could not be loaded for jswscimdx.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : jswscimdx.sys ( jswscimdx+7869 )

Followup: MachineOwner
---------
It is very old, too.
Code:
 lmvm jswscimdx
start             end                 module name
fffff880`04b0f000 fffff880`04b25000   jswscimdx T (no symbols)           
    Loaded symbol image file: jswscimdx.sys
    Image path: \SystemRoot\system32\DRIVERS\jswscimdx.sys
    Image name: jswscimdx.sys
    Timestamp:        Wed Aug 29 11:16:09 2007 (46D50821)
    CheckSum:         0001330B
    ImageSize:        00016000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Qualcomm Atheros :: Home.

Let us know the situation.

**The msinfo32 file you uploaded is corrupt. Upload your MSINFO32.nfo file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
My System SpecsSystem Spec
.

21 Oct 2012   #4
Shammon22

Windows 7 ultimate x64
 
 

Hey there, thank you for the reply. I was unable to find a "Atheros JumpStart wireless API" download anywhere. I read other people deleter their jswscimdx.sys.
My System SpecsSystem Spec
21 Oct 2012   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The .nfo file is still corrupted. Try exporting it as a .txt document.

It is very much possible that you may not find a driver of 2007. So you may uninstall it. Uninstall it in device manager, and then restart.

Hopefully windows will configure some drivers at startup.
My System SpecsSystem Spec
21 Oct 2012   #6
Shammon22

Windows 7 ultimate x64
 
 

Okay I think I found it I'll reset and see what happens when I go to sleep mode. Thank you for the help.
My System SpecsSystem Spec
21 Oct 2012   #7
Shammon22

Windows 7 ultimate x64
 
 

I deleted all my wireless Jumpstart gateways and uninstalled them. I reset the computer and put it to sleep, and wouldn't you know it no bluescreen! Should I re-upload another zip to see if the problem is cleared up? Thank you for all the help sir!
My System SpecsSystem Spec
21 Oct 2012   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Mate you just observe the computer ... how it behaves ... and if it crashes anymore or not.

If not, it's nice. If crashes, let us know
My System SpecsSystem Spec
Reply

 BSOD when entering sleep mode NDIS.Sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when entering sleep mode, DRIVER_IRQL_NOT_LESS_OR_EQUAL, ndis.sys
Hey guys, I've been getting a BSOD fairly regularly when trying to enter sleep mode. I attached all the seven forums info but if theres anything else you need let me know. Thanks in advance! EDIT - Ive been messing around with it a bit and it seems the the BSOD can appear when trying to go...
BSOD Help and Support
BSOD when entering Sleep mode
Hello, I recently got a BSOD when I entered Sleep mode. I thought a program which I recently installed caused the problem, but I got another BSOD when I restarted my computer, uninstalled the program and tried entering Sleep mode a second time. My second thought was that the power cut...
BSOD Help and Support
Bsod when entering sleep mode
I know this is a common issue and that it can be caused by a variety of things, hence the reason I'm posting. I have attached the Blue Screen View file. Any help is greatly appreciated :D System: Win 7 home x64 Cpu: i7 2630 qm Ram: 8gb ddr3 1333 Video: nv 540m
BSOD Help and Support
BSOD entering sleep mode
Computer crashes when entering sleep mode. The led blinks for 2 or 3 seconds before the bluescreen. When rebooting Windows displays the crash message. This happens every time the computer attempts to go to sleep mode. Computer shuts down properly. Worked fine until yesterday. Windows 7 Pro Sp1...
BSOD Help and Support
BSOD while entering sleep mode
PC just BSOD while entering sleep mode
BSOD Help and Support
BSOD when entering sleep mode
I am running Windows 7 Home Premium x64 (SP1). For the past few weeks every time I enter sleep mode I get the BSOD: 0x7E hiber_scsiport.sys. I have attached the BSOD files. Can anyone please help me fix this issue?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:17.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App