Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSODs after Mainboard and CPU Upgrade plus change to 64 bit Windows 7


20 Oct 2012   #1

Windows 7 Home Premium 64 bit SP1
 
 
BSODs after Mainboard and CPU Upgrade plus change to 64 bit Windows 7

I cannot get enough information online to teach myself debugging blue screens with Windbg. I get to !analyze -v and my eyes glaze over.

My tale of woe would wring tears from a needle's eye but I will spare you.

What is with my Windows 7 box? Before I rebuilt it and upped the little fellow to 64 bit, it ran like a top.

I have swapped or replaced the motherboard, hdd and psu. The RAM survived 9 iterations of memtest86+. I have experienced crashes with both the onboard and GTS 450 graphics. I have wept salt tears. I have chewed the carpet in rage

I uninstalled Daemon Tools Lite on the strength of the contents of one minidump. That was yesterday. I suppose it is at least possible that that will solve the problem since I have not had a crash since.

I attach the material from the SF diagnostic tool. I have other stuff available which I collected a la the forum sticky before having my attention drawn to the tool just before posting. For any assistance I will be pathetically grateful.

My System SpecsSystem Spec
.

21 Oct 2012   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Welcome aboard.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {5003, fffff70001080000, b9e, ba00000153c}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+45f3d )

Followup: MachineOwner
---------
According to Carrona.org, STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory, kernel

But neither a driver nor memory is indicated in the dump. So let us start with search for a faulty driver.
Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Also, remove the following programs...
Code:
Start Menu\Programs\GIGABYTE 
Start Menu\Programs\GIGABYTE\AutoGreen
Start Menu\Programs\GIGABYTE\ET6
Start Menu\Programs\GIGABYTE\Smart 6
And free up the startup.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept the restart.
My System SpecsSystem Spec
21 Oct 2012   #3

Windows 7 Home Premium 64 bit SP1
 
 

Thanks I will report in a day or so.
My System SpecsSystem Spec
.


22 Oct 2012   #4

Windows 7 Home Premium 64 bit SP1
 
 
Fresh Minidump

I attach .dmp file: 102312-36675-01.zip for your information.
My System SpecsSystem Spec
22 Oct 2012   #5
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

According to the latest dump you uploaded, you need to upgrade the network driver:

Download the network card driver from manufactuer's website.
Then reinstall the driver:
  • Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Menu Search box and press Enter.
  • Double click to expand "Network adaptors".
  • Right click your network card and click Uninstall.
  • Check "Delete driver software for this device" check box, click OK.
  • Restart the computer
If windows does not auto configure the appropriate drivers at startup, install the downloaded one manually.

Let us know the situation after updating this driver.
My System SpecsSystem Spec
23 Oct 2012   #6

Windows 7 Home Premium 64 bit SP1
 
 

Had problems with update so swapped in a newer adapter. We shall see what we shall see. Do you want any further minidumps? I have uploaded one herewith (I hope) from earlier on.
My System SpecsSystem Spec
23 Oct 2012   #7
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Let us know the results after swapping the adapter, coz, this dump also indicates some network problem.

You may plan to remove BitComet and see if the situation is different here or not.
My System SpecsSystem Spec
23 Oct 2012   #8

Windows 7 Home Premium 64 bit SP1
 
 

Noted. Thanks. I'll forward my next minidump in due course
My System SpecsSystem Spec
23 Oct 2012   #9

Windows 7 Home Premium 64 bit SP1
 
 
Further Crash

Herewith .dmp file. I have uninstalled BitComet.
My System SpecsSystem Spec
23 Oct 2012   #10
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800159ca88, fffff8800abdbfc0, 0}

Probably caused by : NETIO.SYS ( NETIO!WeightCompare+8 )

Followup: MachineOwner
---------
It is network related, and you need to follow the instructions given in post #5

EDIT ..... It is D-Link Wifi LAN Card.
Code:
fffff880`0abdbdc8  fffff800`032750cb nt!ExFreeToNPagedLookasideList+0x27
fffff880`0abdbdd0  fffff880`0a8ea600Unable to load image \SystemRoot\system32\DRIVERS\Dnetr28ux.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Dnetr28ux.sys
*** ERROR: Module load completed but symbols could not be loaded for Dnetr28ux.sys
 Dnetr28ux+0x25600
Search for the updates in either http://www.ralinktech.com/en/04_supp...ort.php?sn=500 or http://www.dlink.com/ca/en/home-solutions/support.
My System SpecsSystem Spec
Reply

 BSODs after Mainboard and CPU Upgrade plus change to 64 bit Windows 7




Thread Tools



Similar help and support threads for2: BSODs after Mainboard and CPU Upgrade plus change to 64 bit Windows 7
Thread Forum
New upgrade to windows 7 and black screen . How to change resolution. Graphic Cards
Is overclocking depending on Mainboard? PC Custom Builds and Overclocking
Need help with mainboard and Windows 7 Hardware & Devices
Windows 7 BSODs after upgrade from Vista BSOD Help and Support
Solved Windows 7 install freezes at mainboard splash screen Installation & Setup
Question about mainboard and CPU Hardware & Devices
Need help with my Mainboard. Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:51 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33