Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD persists after System Restore, error 0x000000F4

21 Oct 2012   #1
Muckabout

Windows Home Premium x64 SP1
 
 
BSOD persists after System Restore, error 0x000000F4

My laptop seems to have taken a shining to the colour blue today. I had some KERNEL_DATA_INPAGE_ERRORs this morning, which popped up after some install/uninstall issues. Followed this up with a System Restore. Those BSODs were replaced by a video driver failure BSOD which was repaired by installing new drivers via Safe Mode (with Networking).

Final float in this BSOD parade is a "Process or thread crucial to system operation has unexpectedly exited or been terminated" BSOD. Exact error code is 0x000000F4 (0x0000000000000003, 0xFFFFFA80089BFB30, 0xFFFFFA80089BFE10, 0xFFFFF80004184460). Startup repair isn't working, but Safe Mode continutes to work seamlessly.

I'd love to provide a dump file for the BSOD, but even though I've properly configured Windows to create dumpfiles, I continually get "Physical memory dump failed with status 0XC0000010." Nonetheless, I'm submitting a SF_Diagnostic zipfile.

Any help that can be offered is appreciated.


My System SpecsSystem Spec
.
22 Oct 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Do you haven an SSD? Have you updated to the latest firmware for it?
Bug check F4 is usually related to storage/hard drive.

Please post a screenshot using crystal disk info:Check this tutorial, it may be helpful:Run Disk Check on your hard disk for file system errors and bad sectors on it:Hard drive test both short and long with: Also the DOS version of:
My System SpecsSystem Spec
22 Oct 2012   #3
Muckabout

Windows Home Premium x64 SP1
 
 

I'm finding this reply first thing in the morning. Before heading to bed last night I ran the SeaTools Short DST and failed, so I left DiskCheck to run over night. Restarted this morning and booted into windows without issue, and sfc/scannow didn't find any problems.

For the record, I'm including a CrystalDiskInfo scan I prepared this morning.
My System SpecsSystem Spec
.

22 Oct 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

It's hard to understand stuff from the text file and you please upload the image for us. Reading your post my best guess is that your hard drive is about to fail, please back up all the stuff you have to.
My System SpecsSystem Spec
Reply

 BSOD persists after System Restore, error 0x000000F4




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD error 0x51 REGISTRY_ERROR with no system restore point
SF diagnostic tool info ZIP attached. After logging in, about 10-20sec later, I get a BSOD with 0x51 REGISTRY_ERROR. I do not have a system restore point. I have tried most of all of the things found when googling this: chkdsk, ccleaner, scf /scannow, etc... Starts up fine in safe mode. I...
BSOD Help and Support
System Restore Error, Unable to Create Restore Points
Hello everyone, not sure why but I get an error every time I open the System Restore. I rarely have to use a restore point as I regularly maintain my computer and check for viruses and malware, but I would like to have the option just in case. When I open System Properties, and click the System...
Backup and Restore
BSOD system restore displays error (0x80070005)
I was working on my computers stupid charging port when the thing turned on. Everything worked fine so I turned it back off and put everything back together. When I tried to reboot it it goes directly to the system startup repair which fails and brings me to the recover manager. I have tried...
BSOD Help and Support
Blue Screen (BSOD) After System Image Restore - *** STOP 0x000000F4...
I backed up my old system before sending it in for repairs. They replaced the HDD and sent me back the refurbished PC. So I started to restore my old system to the same computer. I put in the repair disc I just made on the new OS they put on the new HDD (Home Premium). I went to system image...
BSOD Help and Support
BSOD During System Restore, error 0x000000d1
Hi, Recently I've gotten back into SW:tOR so I have been playing incredibly large amounts of it possibly putting stress son my laptop. Sometime yesterday for the first time in a few months the game crashed, No BSOD and no data was stored in Mini dump. i thought it was nothing then it happened...
BSOD Help and Support
BSOD on startup, error on system restore
First, I apolagize for spelling/grammer I am on my iPod. My computer gets a stop BSOD error on startup. I have been booting from my CD and using system restore. All of the errors are: System restore failed to extract the file (D:\Program Files (x86)\Mozilla Thunderbird\aomp/nents) from the...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App