Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help reading BSOD DMP Files

24 Oct 2012   #11
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Yup, keep the thread open for a week or 2 before taking as solved.


My System SpecsSystem Spec
.
31 Oct 2012   #12
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Still getting the BSOD. Alot less frequently now, but its still happening. How do I check if its my RAM and if so, which RAM?
My System SpecsSystem Spec
31 Oct 2012   #13
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Upload the /.dmps

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
My System SpecsSystem Spec
.

03 Nov 2012   #14
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The test ran for 18 hours with 6 passes and 0 errors until my mom unplugged my computer by accident -______- do you think the last 2 passes really mattered? I'm running it again anyways.
My System SpecsSystem Spec
03 Nov 2012   #15
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Yup you should.
My System SpecsSystem Spec
04 Nov 2012   #16
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I ran the memtest for 9 runs with 0 errors. However, I'm still crashing alot. Here's the latest DMP. http://sdrv.ms/SmjQiQ
My System SpecsSystem Spec
04 Nov 2012   #17
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please upload the files directly to the website.
My System SpecsSystem Spec
04 Nov 2012   #18
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Sorry i forgot. Here ya go. If it helps, my computer is BSOD'ing a lot more often now.
My System SpecsSystem Spec
04 Nov 2012   #19
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Can you upload a snip of the hardware temperatures using Speccy?
My System SpecsSystem Spec
05 Nov 2012   #20
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Holy tits 111 C? Is my mobo supposed to be that hot?

Then again i just finished playing a pretty long game after its been on for the last 30ish hours. Not sure if that matters though.
My System SpecsSystem Spec
Reply

 Help reading BSOD DMP Files




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
reading dump files
When reading dump files; what is the easiest way to figure out the culprit in terms of what everything in a dump file is pointing to as the reason for the dump file happening? Is it whatever the string is pointing to is the culprit or something similar? I am not a expert in reading dump files;...
BSOD Help and Support
Reading Files on CD after burning- "Files waiting to be burned" blank
This is driving me crazy and I know it is something very simple. I used Windows Explorer to burn pictures to a CD. I don't have separate CD burning software since I do this so rarely. I successfully burned the CD. When I insert the CD in another Windows 7 machine, it sees the folders and...
General Discussion
Indexer went nuts, reading every file - no new files
Indexing was complete. What might have triggered this is I changed the default location for Music to my D:\Libraries\Music folder which IS indexed. I didn't update any files that are indexed. I see it chugging through all my photos and music (via RESOURCE MONITOR -> DISK view). Any...
General Discussion
Kernel power 41 (63) Error Problems with reading minidump files.
Hello, Im new on this forum let me introduce myself. My name is Snowman I'm 16 Years old. And im from the Netherlands. I have a Brand new Pc this is my setup:
BSOD Help and Support
help reading dump files
Hi all, my friends comp keeps bsoding and i was able to get him to send me the dump files (7 of them) through email. Now my problem is that i cant open it. I tried installing windows sdk on my comp to read it but it keeps failing the install. So i was wondering if i place those dump files on to my...
BSOD Help and Support
Is WMP 12 reading hidden tag in my mp3 files?
Hi guys, I use mp3tag to add id3v1.1/id3v2.3/ape2 tags to my mp3 files. However, when I open these music files in wmp, it first displays the file names and then switches over to these incorrect tag names with the incorrect album art. I have tried deleting and then re-adding the tag data +...
Music, Pictures & Video


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App