Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help reading BSOD DMP Files

05 Nov 2012   #21
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

111? OMG

Do you have a cooler? How old is the computer and all the hardware?


My System SpecsSystem Spec
.
05 Nov 2012   #22
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

PS, I did check the recent dump file you uploaded and it comes with the same 7F. Go back to page one and see the usual causes for the bug check.

It does have "bad motherboard" on usual causes
My System SpecsSystem Spec
05 Nov 2012   #23
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yea the only things I have cooling my comp is the basic fan that comes with the case and the heatsink/fan that comes with the processor.

I built my comp back in 09 if I'm not mistaken.

I think I'll fix that temperature regardless of whether or not it's causing my problems lol. Any suggestions?
My System SpecsSystem Spec
.

05 Nov 2012   #24
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

111C is at the critical level for the board mate. I assume you're in the US so got to Newegg and get a good after market CPU cooler for you 1156 socket. A Hyper 212 EVO is a good one at about $30, get a second fan for it too. It is 6.25" tall so make sure it will fit your case. There are others which are more low profile as well.

What temps do you get at idle, say after 30 minutes?

Your voltage regulator module (VRM) may be bad causing heat. Since the 1156 is a bit dated You may want to consider a board and CPU upgrade. Also check you system voltages from your BIOS and post them.
My System SpecsSystem Spec
05 Nov 2012   #25
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

It Idles around 90 C and when I game it goes back to 111 C :/

Isnt my cpu still decent? I havent seen much else higher than an i5 (other than an i7) then again you guys are better informed than me.

Also, shouldnt my mobo have some kind of warning or failsafe for high temps? What happened to that? lmao
My System SpecsSystem Spec
06 Nov 2012   #26
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

*update* I smell fire from my power supply. Could speccy be reading power supply as mobo? My computer didn't even crash this time, it just turned on and won't turn on anymore.
My System SpecsSystem Spec
06 Nov 2012   #27
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Oh-Oh. there are no temp sensors in the PSU. Either it had went bad or the board itself fed back current to burn it out. The board's VRMs may have caused it too.

There is no warning of impending disaster with high motherboard temps, just smoke or the smell of it.

You CPU is two generations behind and not up to new technologies.
My System SpecsSystem Spec
13 Nov 2012   #28
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

*Update*
I flashed my bios. The temps just dropped by about 40 degrees C.

No blue screen as of yet.

The fix is unknown since a lot of things were affecting my computer negatively.

Ill keep you guys up to date should anything occur.

I also want to thank Britton and Kookat for all your help. Thanks
My System SpecsSystem Spec
13 Nov 2012   #29
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

You're welcome and good luck! Did you check out the PSU or determine the source of the smoke smell?
My System SpecsSystem Spec
14 Nov 2012   #30
GambaJabari

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Yes I replaced my old 430 (ish) volt with a new 600 volt.
My System SpecsSystem Spec
Reply

 Help reading BSOD DMP Files




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
reading dump files
When reading dump files; what is the easiest way to figure out the culprit in terms of what everything in a dump file is pointing to as the reason for the dump file happening? Is it whatever the string is pointing to is the culprit or something similar? I am not a expert in reading dump files;...
BSOD Help and Support
Reading Files on CD after burning- "Files waiting to be burned" blank
This is driving me crazy and I know it is something very simple. I used Windows Explorer to burn pictures to a CD. I don't have separate CD burning software since I do this so rarely. I successfully burned the CD. When I insert the CD in another Windows 7 machine, it sees the folders and...
General Discussion
Indexer went nuts, reading every file - no new files
Indexing was complete. What might have triggered this is I changed the default location for Music to my D:\Libraries\Music folder which IS indexed. I didn't update any files that are indexed. I see it chugging through all my photos and music (via RESOURCE MONITOR -> DISK view). Any...
General Discussion
Kernel power 41 (63) Error Problems with reading minidump files.
Hello, Im new on this forum let me introduce myself. My name is Snowman I'm 16 Years old. And im from the Netherlands. I have a Brand new Pc this is my setup:
BSOD Help and Support
help reading dump files
Hi all, my friends comp keeps bsoding and i was able to get him to send me the dump files (7 of them) through email. Now my problem is that i cant open it. I tried installing windows sdk on my comp to read it but it keeps failing the install. So i was wondering if i place those dump files on to my...
BSOD Help and Support
Is WMP 12 reading hidden tag in my mp3 files?
Hi guys, I use mp3tag to add id3v1.1/id3v2.3/ape2 tags to my mp3 files. However, when I open these music files in wmp, it first displays the file names and then switches over to these incorrect tag names with the incorrect album art. I have tried deleting and then re-adding the tag data +...
Music, Pictures & Video


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App