Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Page fault in nonpaged area and memory management (bsod)

22 Oct 2012   #1
Mansterr

Windows 7 professional 64 bit
 
 
Windows 7 Page fault in nonpaged area and memory management (bsod)

I have been getting random blue screens for about a month now so I decided I would finally make a forum post about it. A lot of my games on steam always has files missing after completely downloading the games. It seems like a lot of my errors when installing programs are missing files. So I decided it probably is the hard drive messing up so I went and bought a new hard drive but that did not fix the problem. I still have the same problem. I have no idea if it is a hardware issue or a software issue that is causing me to blue screen. I have done windows memory test and hard drive error checking. If you could help me I would greatly appreciate it.


My System SpecsSystem Spec
.
23 Oct 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.


Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
Upload a screenshot of your hard disk using crystal disk info:
Run Disk Check on your hard disk for file system errors and bad sectors on it:
Hard drive test both short and long with:
Also the DOS version of:
Keep us posted
My System SpecsSystem Spec
23 Oct 2012   #3
Mansterr

Windows 7 professional 64 bit
 
 

I did a memory test and i tried the first ram it was producing errors at the start for all 4 slots of my motherboard but when i try my 2nd ram there was no errors. I think it was a bad stick of ram but i ll keep posted if the problem still continues. Thank you very much for helping with the problem.
My System SpecsSystem Spec
.

24 Oct 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

No problem, keep us posted.
My System SpecsSystem Spec
04 Nov 2012   #5
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Did the BSOD-s reoccur?
My System SpecsSystem Spec
Reply

 Windows 7 Page fault in nonpaged area and memory management (bsod)




Thread Tools




Similar help and support threads
Thread Forum
BSOD (Memory Management, Page Fault in Non-paged Area)
Hi, This is the first time that I've experienced this error(s) resulting in multiple BSODs. So far, I've tried clearing my cache, removing adware and scanning my files using sfc/scannow but the error(s) still persists. Hope that I can get some advice/help on what I can do to remove the error(s)...
BSOD Help and Support
BSOD - MEMORY MANAGEMENT and PAGE FAULT IN NON PAGED AREA
All, I built my PC in 2010. Ever since I have been having intermittent BSOD problems. I've found that if I put the computer to sleep instead of shutting down, when it boots stable, it will remain stable. Otherwise I have BSOD crashes 5-20 minutes after booting. I've run memtest86+ after crashes...
BSOD Help and Support
BSOD error:memory management (i think) and page fault in nonpaged area
Hello guys. please help me with my BSOD problem. currently i can only see these two error messages (as per title) every time my laptop went bluescreen. i have acer aspire 4741G with Win7 Home Premium x64 pre-installed attached is minidump file thankyou people!
BSOD Help and Support
Memory Management/Page fault in nonpaged area BSOD
Hey guys, just got a new PC. Board: Sabertooth P67 CPU: Intel Core i7 2600 3.4GHz Grafics: Asus Radeon HD 6770 1GB GDDR5 Memory: Corsair Vengeance 2x4GB 1600 (CMZ8GX3M2A1600C9) The thing is.. at first it installed allright with everything inside.. then it crashed like 2 times and i didnt...
BSOD Help and Support
Windows 7 x64 BSOD memory management and page fault in non paged area
Hi Guys, I started getting BSODs after installing MSI after burner, os i uninstalled it and ran cc cleaner still i am getting bsods, I installed windows 7 x64 2 days back. I am using MSE antivirus. and in windows update I am not able to see SP1 update so didnot update yet. System config in...
BSOD Help and Support
BSOD - Memory Management and Page Fault In Non Paged Area
Hello, I built my computer about six months ago and have been having sporadic BSOD problems since day one. I have tried everything I know to do and gotten nowhere. I'm running 7 Professional x64 retail, and this is the first install of it. My computer seems to give me a BSOD within a few minutes...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App