Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD number 102512-30217-01

29 Oct 2012   #11
FelipeCODX

Microsoft Windows 7 Ultimate 64-bit Service Pack 1
 
 

Quote:
devices? If you do, enable it. USB 3.0 will not work until the OS loads. The USB 3.0 drivers are in the OS.
It's enabled



Quote:
Your front pannel headers has an audio connection, is it plugged into the HD audio connection or the AC97 connection?
AC97 connection


Quote:
Try plugging your Keyboard to a rear USB 2.0 port and the headphones into a front USB 2.0 port.
I did this, and i still getting that problem with the Headset "it don't work" (remembering: my keyboard is connected at the 3.0 USB "it's a 2.0 USB keyboard" and it's working ok, my headset is connected at a 2.0 USB and it's working ok)



Quote:
Also, set the voltage for the ram by manufacturers specs and make sure the timings are the same.
I set the AI Options to X.M.P. and the voltage and the timings is ok.




Quote:
Let us know how that works for you.
Everything is working fine, but sometimes i got that BSOD. maybe it's some driver conflict or maybe it's ok now, if i get the BSOD again i will report for you guys, Thank you very much guys.


My System SpecsSystem Spec
.
29 Oct 2012   #12
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The sound should be for the front panel USB ports, it's a front panel connector. Try connecting the HD Audio instead of the AC97. You have the USB in BIOS configured correctly and the keyboard should work, but sometimes USB 3.0 does not work like it should. And for the ram, I always set the voltage manually. If you do that set it at 1.65V. Also, did you download your motherboard drivers from the manufacturer's web site or use the driver disk? You will get much more current drivers from the manufacturer's site.

Also, when you install the Nvidia drivers, the Nvidia HDMI driver is not necessary, especially if you don't use HDMI. I have read that they can conflict with on board realtek audio drivers.
My System SpecsSystem Spec
Reply

 BSOD number 102512-30217-01




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
A number of different BSOD's from a new rig multiple rebuilds
Hi All, Couple of days ago I bought a combo of a Gigabyte GA-Z77-DS3H and a i7 3770k with 8GB of DDR 3 RAM. I also purchased a OCZ Agility 3 120gb HDD. Now after putting all this together and Installing windows 7 pro x64 on it. Im getting a BSOD every half hour minimum sometimes even closer...
BSOD Help and Support
BSOD shortly after loading, do not know error number
The computer has been having some issues for a couple of weeks now. It was running slowly, and it would get the BSOD intermittently, mostly on startup. I attatched the log to the post. I apologize for not providing more information.
BSOD Help and Support
BSOD while playing Civ 5 not sure of my error number, goes by too fast
XPS 8300 XPS 8300 Intel Core i7-2600 processor(8MB Cache, 3.4GHz) 8GB DDR3 SDRAM at 1333MHz - 4x2GB Dell Consumer Multimedia Keyboard Radeon HD 5700 ST31500341AS 1.5TB HD Genuine Windows 7 Ultimate Dell 1501 WLAN PCIe card Office 2010 1 Year Limited Warranty
BSOD Help and Support
BSOD many error number
hello I buy new pc hp compaq pro i have many crash number memory test 100% clean maybe windows copie problem windows 7 x64 ram :8 go cpu: i3 gpu:intel hd I hope help me thanks :D
BSOD Help and Support
A number of event log errors + BSOD's
In my administrative events log I have a number of errors all of which point to the service control manager. This is a new install and I have had the same system running once before with no problems. Memory is good, no overclocking, nothing overheating the power supply is good and it's also...
BSOD Help and Support
BSOD after changing number of processors
Hi all. I read somewhere that in order to improve the boot speed you need to go into MSCONFIG->Boot->Advanced Options...-> Tick the number of processors and select the correct number (2 or 4). It didn't improve anything so I went back the unchecked the Number of processors, I then rebooted the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App