New
#1
Welcome aboard.
► Apparently it is caused by Native Instruments Komplete Audio 6, as you stated.
Update it from http://co.native-instruments.com/?id=freeupdates.Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 10D, {6, 3, 57fe6b963b8, fffffa800fbccac0} *** WARNING: Unable to verify timestamp for ka6usb.sys *** ERROR: Module load completed but symbols could not be loaded for ka6usb.sys Probably caused by : ka6usb.sys ( ka6usb+7553 ) Followup: MachineOwner ---------
But, there are some other things behind it, too.
► Intel(R) USB 3.0 Hub Driver
The update site is Intel Download Center.Code:fffff800`05146698 fffff880`07e33b9cUnable to load image \SystemRoot\system32\DRIVERS\iusb3hub.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for iusb3hub.sys *** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys iusb3hub+0x17b9c
► Intel(R) USB 3.0 eXtensible Host Controller Driver
Update site is Intel Download Center.Code:fffff800`05146658 fffff880`10157ea0Unable to load image \SystemRoot\system32\DRIVERS\iusb3xhc.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for iusb3xhc.sys *** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys iusb3xhc+0x32ea0
► Intel graphics driver.
Update site is Intel Download Center.Code:fffff800`05146588 fffff880`05146700Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for igdkmd64.sys *** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys igdkmd64+0xa8700
► What can make such a mess in a very recent BIOS version?
The answer is ....Code:BIOS-versie/datum American Megatrends Inc. N76VM.211, 23-5-2012
- Start Menu\Programs\McAfee
Uninstall it. Then first do a full scan with Windows Defender Offline, and after that, download and install Microsoft Security Essentials - Microsoft Windows
► You have a lot of ASUS bloatware installed.
Clean Up Factory Bloatware
► Free up the startup.
- Click on the Start button
- Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
- Select the “Startup” tab.
- Deselect all items other than the antivirus.
- Apply > OK
- Accept the restart.
Let us know the result.
Allright, it took a long time with the de-, re- and installations. But I just finished with the free up startup. And everything works well so far.
I did not yet have the Komplete Audio 6 connected yet, I will do that tomorrow.
I will let you know later how things run when the connection is made with the Komplete Audio 6.
Very much thnx so far!
It didn't work out as I hoped it would. A few hours later it had a BSOD again. And with also the same fault 0x0000010D.
What can I do this time?
You need to upload the new dumps, so that we can see what is causing the problem there now.
Usually a stop 0x0000010D happens either due to a device driver or memory, but I haven't got anything there to suspect the memory.
Disable USB Selective Suspense and see if it changes the situation or not.
USB Selective Suspend - Turn On or Off
Also, reinstall USB Ports drivers
- Right click on the My Computer icon> Select manage. It will open the computer management window.
- Click on the "Device manager" in the left pane.
- Expand USB Serial Bus Controller.
- Right click > Uninstall them all, one by one.
- When Done, restart the computer.
- On restart, the necessary drivers will be auto-installed.
I did what you asked me. The USB drivers re-installed themselves after the restart.
But after the restart i got the following message on screen: Attachment 240693
What must I do now?
Yes, disable instant on.
Best, what we follow and suggest, get rid of all the ASUS bloatware.
Clean Up Factory Bloatware