Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSODs (Memory_Management, Page_Fault_In_Non_Paged_Area)

31 Oct 2012   #1
Marioman42

Windows 7 Home Premium x64
 
 
Multiple BSODs (Memory_Management, Page_Fault_In_Non_Paged_Area)

Hello guys.
For the past few days, I have been getting multiple BSODs on my custom built computer (I built it about 3-4 months ago, first time builder). It started when my AMD graphics driver crashed while I was playing Borderlands 2. I have tried re-installing multiple drivers, including the AMD driver, uninstalling and re-installing Steam, replacing Avast anti-virus with Microsoft Security Essentials, and have done multiple disk scans (although sfc /scannow never finishes). I have uploaded the most recent BSOD which happened while registering for this forum. Any help would be appreciated.


My System SpecsSystem Spec
.
01 Nov 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome

You are having many 1A errors

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
My System SpecsSystem Spec
Reply

 Multiple BSODs (Memory_Management, Page_Fault_In_Non_Paged_Area)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PAGE_FAULT_IN_NON_PAGED_AREA, random BSODs
Hello all, and thanks in advance for any assistance provided. I only recently built a new system in February, and I've been getting infrequent blue screens of death ever since installing Windows. The errors have always been one of two types, and the BSODs never name a specific file. The two errors...
BSOD Help and Support
Constant BSODs, usually Page_Fault_in_Non_paged_Area
I've updated motherboard and GPU drivers, don't get any video errors, and have run the Microsoft AND Memtest86 memory testers. Will run memtest86 again while I'm at work (9AM-4PM EST). Also ran Malwarebytes, combofix, and a few others. Dump files are attached. Hope you can help. :cool:
BSOD Help and Support
SERVICE_EXCEPTION and MEMORY_MANAGEMENT BSODs after PC rebuild
Hey, I've recently rebuilt my PC following an issue caused by a faulty PSU. It damaged the PC to the point where it wouldn't switch on. After trying a lot of fixes provided by the kind people on your sister site, EightForums, I RMA-ed the motherboard and processor. After installing their...
BSOD Help and Support
Constant MEMORY_MANAGEMENT bsods - please help
Hi all, I've recently had my computer repaired (previous problem seems fixed) and I've had it back about 5 days. for the last 3/4 I've had 3-4 MEMORY_MANAGEMENT BSODs a day, and I'm not sure how I should proceed. The SF Diagnostic tool file is attached. Any help would be greatly appreciated....
BSOD Help and Support
Constant memory_management BSODs
So I've been getting a ton of BSODs recently. They seem to happen at random times. I'm usually using chrome or steam when it happens, but not limited to just those. I ran driver verifier for 36 hours straight and it never crashed once, so I don't think it would be a driver. I've also run...
BSOD Help and Support
MEMORY_MANAGEMENT random BSODs
Im having lots of trouble with my machine going bsod with the notice "MEMORY_MANAGEMENT". Looking around it seems the most likely cause is faulty memory. My memory does fail memtest86. However, using either one of my 2 memory modules alone leads to no bsods. One week ago, trying to solve the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App