Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD only after computer is "idle"...

14 Nov 2012   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I think you need Driver verifier now.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.


My System SpecsSystem Spec
.
14 Nov 2012   #22
Quailman

W7 x64
 
 

Right as I enabled the verifier, I rebooted, and before I could boot, ran into a BSOD.

At the top of the blue screen was "usbfilter.sys". Do I need to run another diag?
My System SpecsSystem Spec
15 Nov 2012   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

First of all, do there.

For the port, first, uninstall and reinstall the USB ports drivers.
  1. Right click on Computer icon > manage. It will open the computer management window.
  2. Click on "Device Manager" in the left pane, it will list all installed devices up.
  3. Expand "USB Serial Bus Controllers" by clicking on the triangle in front of it.
  4. Click on one item to select, then right click and uninstall.
  5. Do the same for all.
  6. Restart the computer.
  7. At restart, windows will auto configure the appropriate drivers.
And, Disable USB Selective Suspense too.
USB Selective Suspend - Turn On or Off


For the devices, first, detach all the USB devices other than the keyboard and mouse.
Then, Update the drivers for them all, including the keyboard and mouse, if any third party drivers are installed for them.

Now, see if it crashes again. Let us know.
My System SpecsSystem Spec
.

Reply

 BSOD only after computer is "idle"...




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Changing "Computer" and "Network" icons in explorer navigation pane
Does anybody know how I can change these icons? I changed the default icon for the network one in HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C} but it didn't change. Appreciate any help, B
Customization
Hard Disk can't read in "my computer ", "initialized",I/O device error
I have a big problem here, I have used my hard disk for 9month, Yesterday when I watched movie on the half way, My hard disk suddenly disfuntion, And I thought my laptop problem due to always lagging so I restart my computer. But after that I can't read my hard disk (WD)in my computer. It can...
Hardware & Devices
BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"
Hi everyone! Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two...
BSOD Help and Support
BSOD on home theater pc, crashed when "idle"
Hi all, I have a home theater pc that is crashing when I am not actively using it (though who knows what is going on in the background...). Attached is my sf tool output. Any help is much appreciated! Thanks! http://www.sevenforums.com/attachment.php?attachmentid=277953&stc=1&d=1374681547 ...
BSOD Help and Support
Random BSOD usually @ night/idle "Power_State_Driver_Failure" wn 7 Ult
Having random BSOD. Often screen completely black/blank. Must power off to restart. Recent computer rebuild. Windows 7 Ultimate (x64) Service Pack 1 (build 7601) Install Language: English (United States) System Locale: English (United States) Installed: 4/14/2013 4:41:05 AM Enclosure...
BSOD Help and Support
"Return computer to factory condition" or "Use A System Image Crea..."
Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing! :confused:
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App