Windows 7: BSOD after resuming from Sleep

bineet5653 · 08 Nov 2012

Hi..
I've my fingers crossed for my first post, as I've googled my BSOD problem but found that even for BSOD after resuming from SLEEP, there are specific causes. So here i am posting my own specific BSOD problem as i realized this forum is the best place for it.

Ok my problem is I am getting BSOD whenever I put my computer to sleep and if i want to resume it afterwards. I recently performed System Recovery, so my system is fresh and updated. And i really dont have any kind of problem except this one. I've attached GrabAll rar file.

The last BSOD gave me this:

Code:

Problem signature:
  Problem Event Name:	BlueScreen
  OS Version:	6.1.7601.2.1.0.768.3
  Locale ID:	16393

Additional information about the problem:
  BCCode:	d1
  BCP1:	0000000000000002
  BCP2:	0000000000000002
  BCP3:	0000000000000001
  BCP4:	FFFFF880055AEB67
  OS Version:	6_1_7601
  Service Pack:	1_0
  Product:	768_1

Files that help describe the problem:
  C:\Windows\Minidump\110812-33056-01.dmp
  C:\Users\Bineet\AppData\Local\Temp\WER-49717-0.sysdata.xm

Please i love you all, who are always there to solve problems. You all are really adorable people

**yowanvista** · 08 Nov 2012

Welcome to Sevenforums.

Your crash was caused by the Huawei MT882 USB router driver(glaui64.sys) which dates back to 2007 and is hence incompatible with Windows 7.

The driver along with the software using it must be either updated or removed. You could also directly use the Ethernet port instead of the USB connection, that will fix the problem. (Using the USB interface with Routers is generally not recommended).

Code:

glaui64.sys        fffff880`055aa000    fffff300`055bc000    0xfffffa8000012000    0x46289e56    20/04/2007 15:04:54

Code:

BugCheck D1, {2, 2, 1, fffff880055aeb67}

Unable to load image glaui64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for glaui64.sys
*** ERROR: Module load completed but symbols could not be loaded for glaui64.sys
Probably caused by : glaui64.sys ( glaui64+4b67 )

bineet5653 · 08 Nov 2012

Thanks a lot for looking into my case

Infact i used to work with Ethernet cable earlier and never had encountered this BSOD earlier. And now it suddenly makes sense as ever since i installed driver to use my modem through USB, it has been giving me this problem.

So can i really find updated driver for this coz as you've told that driver provided in the CD is very old??

Or if not then from where i can delete this driver?(switching to Ethernet cable use later on)

**yowanvista** · 08 Nov 2012

Quote: Originally Posted by bineet5653

Thanks a lot for looking into my case

Infact i used to work with Ethernet cable earlier and never had encountered this BSOD earlier. And now it suddenly makes sense as ever since i installed driver to use my modem through USB, it has been giving me this problem.

So can i really find updated driver for this coz as you've told that driver provided in the CD is very old??

Or if not then from where i can delete this driver?(switching to Ethernet cable use later on)

The manufacturer website usually provides drivers.

bineet5653 · 08 Nov 2012

Thanks a lot yowanvista!!! I deleted the driver and switched to Ethernet..
No more BSOD!!!
Once again thx for the time...

Windows 7: BSOD after resuming from Sleep

BSOD after resuming from Sleep problems?