Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD page_fault_in_nonpaged_area Win7 and Win8

13 Nov 2012   #31
cdog27

Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by tlarseth View Post
Try updating your Video Card Drivers from the Official Nvidia Site

Nvidia.com
They are up-to-date with the latest driver (306.97) and have been since October.


My System SpecsSystem Spec
.
13 Nov 2012   #32
tlarseth

Windows 8 64-bit (6.2, Build 9200) (9200.win8_rtm.120725-1247)
 
 

Quote   Quote: Originally Posted by cdog27 View Post
Quote   Quote: Originally Posted by tlarseth View Post
Try updating your Video Card Drivers from the Official Nvidia Site

Nvidia.com
They are up-to-date with the latest driver (306.97) and have been since October.
What I ment to put in was to redownload them, uninstall your drivers, and then use the freshly installed ones to use, the download you had might have been corrupted, as happens sometimes.

If that doesn't fix it, you can try the Beta Drivers, they fix a few issues the latest stable caused.
My System SpecsSystem Spec
13 Nov 2012   #33
cdog27

Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by tlarseth View Post
Quote   Quote: Originally Posted by cdog27 View Post
Quote   Quote: Originally Posted by tlarseth View Post
Try updating your Video Card Drivers from the Official Nvidia Site

Nvidia.com
They are up-to-date with the latest driver (306.97) and have been since October.
What I ment to put in was to redownload them, uninstall your drivers, and then use the freshly installed ones to use, the download you had might have been corrupted, as happens sometimes.

If that doesn't fix it, you can try the Beta Drivers, they fix a few issues the latest stable caused.
That is what I did when I couldn't get my 460GTX working. Uninstalled drivers, rebooted, re-installed them. I had been using 306.97 since they came out and I don't think this BSOD is directly related to them as I was getting the PAGE_FAULT_IN_NONPAGED_AREA for a considerable time prior to this.

So, as a re-cap:

1) Checked memory with MemTest86+ - no errors.
2) Uninstalled Daemon Tools Lite (a note on this - I got one PAGE_FAULT_IN_NONPAGED_AREA BSOD directly after freshly installing Windows 8, before Daemon Tools was even installed).
3) Tried to enable Driver Verifier, which resulted in 2 BSOD's which popped up too quick for me to see the error message, and then caused my graphics card to go missing from Device Manager and unusable. Don't have dump files for these because I had to recover Windows and roll back.

Any other avenues I could explore?

Appreciate all the help to date - thanks guys!
My System SpecsSystem Spec
.

13 Nov 2012   #34
tlarseth

Windows 8 64-bit (6.2, Build 9200) (9200.win8_rtm.120725-1247)
 
 

Did you run the uninstaller for sptd?

It can be found here, run the installer and choose the uninstall option. Daemon-Tools does not remove this driver file and it is notorious for causing BsoD in both Windows 7 and Windows 8. If you did an upgrade to Windows 8, that driver would still be there, removing it might solve your issue.
My System SpecsSystem Spec
13 Nov 2012   #35
cdog27

Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by tlarseth View Post
Did you run the uninstaller for sptd?

It can be found here, run the installer and choose the uninstall option. Daemon-Tools does not remove this driver file and it is notorious for causing BsoD in both Windows 7 and Windows 8. If you did an upgrade to Windows 8, that driver would still be there, removing it might solve your issue.
No, I did not. I don't know enough about what this is - why exactly is it needed? Is it safe to install? I just download via that link, run and select 'Uninstall' and that should be it?
My System SpecsSystem Spec
13 Nov 2012   #36
tlarseth

Windows 8 64-bit (6.2, Build 9200) (9200.win8_rtm.120725-1247)
 
 

Your not installing it, when you run the installer it will have an option to uninstall, that is what you want. The Daemon-Tools uninstaller doesn't remove that file, which by the way is the one that causes the BsoD with a lot computers.

So to answer your question, download the version for your version of windows 32 or 64 bit, and run it, choosing the uninstall option. When it is done reboot your computer and do whatever you were doing before to cause the BsoD, to see if this fixed the problem.

I used to have an HP DV6-2057cl that would BsoD, and come to find out sptd.sys was causing my issue, I did the steps I just gave you and it fixed the issue.
My System SpecsSystem Spec
13 Nov 2012   #37
x BlueRobot

 

Code:
IRQL_NOT_LESS_OR_EQUAL (a)

BugCheck A, {fffff843efed1318, 2, 0, fffff803efcdf9b0}

Probably caused by : memory_corruption ( nt!MiGetPage+270 )
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL

Uninstall Daemon Tools Lite:

Code:
Start Menu\Programs\DAEMON Tools Lite	Public:Start Menu\Programs\DAEMON Tools Lite	Public
My System SpecsSystem Spec
13 Nov 2012   #38
cdog27

Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by tlarseth View Post
Your not installing it, when you run the installer it will have an option to uninstall, that is what you want. The Daemon-Tools uninstaller doesn't remove that file, which by the way is the one that causes the BsoD with a lot computers.

So to answer your question, download the version for your version of windows 32 or 64 bit, and run it, choosing the uninstall option. When it is done reboot your computer and do whatever you were doing before to cause the BsoD, to see if this fixed the problem.

I used to have an HP DV6-2057cl that would BsoD, and come to find out sptd.sys was causing my issue, I did the steps I just gave you and it fixed the issue.
I downloaded what you suggested, ran it as administrator and it says "No SPTD Version was detected. Select action to be performed"

I then only have an Install button, Uninstall is greyed out.

Daemon Tools has been uninstalled via Programs >> Uninstall a program.

Any other suggestions?
My System SpecsSystem Spec
13 Nov 2012   #39
x BlueRobot

 

Good, and I can't think of any other suggestions at the moment than just wait and see if you get another BSOD.
My System SpecsSystem Spec
13 Nov 2012   #40
cdog27

Windows 8 Pro x64
 
 

NOOOOOOOOOOOO!

Just got Page_fault_in_nonpaged_area BSOD, whilst I was right in the middle of installing Black Ops 2. Files attached. What the hell could this be?!!?
My System SpecsSystem Spec
Reply

 BSOD page_fault_in_nonpaged_area Win7 and Win8




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
win8 downgrade to win7
I have an hp envy 1015dx laptop and I recently tried to install windows 7 after an issue with windows 8 constantly (automatically) opening the winkey UI, making it unable to use the OS. system file checker (sfc/scannow and chkdsk /f) did not repair the win8 installation nor did it fix any of my...
Installation & Setup
How can i share between Win7 and Win8.1 ?
So i have a laptop with Win7 and a new pc with Win8.1 both hooked to a router and im trying to share a drive between them and i keep getting the dreaded "Enter network credentials" prompt so... Can someone share a simple list of things to do to share things...i dont care about security cause all...
Network & Sharing
BSOD 7A randomly crashed in WIN7 but no problem in WIN8
Dear, My Sony VGN-Z36 randomly crashed with 7a code, I have checked my memory, hard disk, SSD days and nights but no error detected. I've had this laptop with Win7 x64 for 4 years, the 7a problem came up months ago, and even the Sony Service found no error with the hardware. Then I try WIN8 for...
BSOD Help and Support
Win8 to Win7 back to Win8 (HELP! w BIOS, product key on BIOS etc.)
Hello everybody! I received a laptop awhile back that came pre-installed with Windows 8 which I did not enjoy, so I decided to downgrade to Windows 7. Which has been going fine and everything is good, but 2~3 weeks ago I had some questions involving my computers performance that I also requested...
Installation & Setup
Direct X 11.1 not available for Win7, only Win8
This is being touted as one reason why we "have no choice" but to move quickly to Win8. It's astounding that MS doesn't care what the market verdict is on Win8 but intends to ram it through at the expense of their most popular OS and the only one which is selling strongly. Microsoft won't...
News
Win7 BSOD PAGE_FAULT_IN_NONPAGED_AREA (50)
Win7 x64 SP1 Retail Original install Age of system 2 weeks (I built with parts from Newegg) Age of OS 2 weeks Using Microsoft Security Essentials Intel i7-3820 ASRock X79 Extreme4 LGA 2011 Intel X79 Corsair CMPSU-850AX 16GB G.SKILL Ripjaws Series 240-Pin DDR3 SDRAM DDR3 1333 OCZ Agility...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:59.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App