Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - IRQL not less or equal, Page fault, Memory Management, etc.

12 Nov 2012   #11
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please upload screenshots of memory tab with CPUz


My System SpecsSystem Spec
.
12 Nov 2012   #12
PhonicStudios

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I have 3 sticks of RAM plugged in on my computer, yet its showing only 2..
heres more specific info from Speccy
Total memory slots 4
Used memory slots 2
Free memory slots 2
Memory
Type DDR3
Size 6144 MBytes
Channels # Single
DRAM Frequency 532.0 MHz
CAS# Latency (CL) 7 clocks
RAS# to CAS# Delay (tRCD) 7 clocks
RAS# Precharge (tRP) 7 clocks
Cycle Time (tRAS) 20 clocks
Command Rate (CR) 2T
Physical Memory
Memory Usage 59 %
Total Physical 3.96 GB
Available Physical 1.60 GB
Total Virtual 7.92 GB
Available Virtual 5.03 GB
SPD
Number Of SPD Modules 3
Slot #1
Slot #2
Slot #3

and what do you mean with the bad RAM module? as I'm more a software person other than a hardware person :/

oh and do you still need CPU-Z? coz I just gave you the specs from Speccy
My System SpecsSystem Spec
12 Nov 2012   #13
x BlueRobot

 

You had errors with the MemTest86+ program, which means that a motherboard DIMM slot or a RAM module must be bad, earlier in the thread you stated that you have 3 2GB RAM modules (see post #7), therefore you have inserted the bad RAM module back into the computer.

I believe koolkat77 wants you to take a screenshot of your memory tab using the CPUz program.
My System SpecsSystem Spec
.

12 Nov 2012   #14
PhonicStudios

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Ah, the actual slot can be bad too?
just to clarify, I have a total of 4x2GB ram sticks, I pulled the odd one out, tested it.. had no changes (still BSOD), so put it back in, turned my PC off, now today I pulled the first in a row from right to left out, and had no BSOD. So I should have 6GB ram, but only shows 4GB on Task Manager and properties of Computer.

CPU-Z down below.


edit: I have a feeling that there might be something wrong with my GPU..
My System SpecsSystem Spec
12 Nov 2012   #15
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

CPU-Z says it is 6 GB already. Let us see another screenshot ....

Press "WIN + PAUSE/BREAK" and upload the screenshot of the resulting window.
My System SpecsSystem Spec
12 Nov 2012   #16
x BlueRobot

 

You need to test each RAM stick individually, so run MemTest86+ on each RAM stick, if an error is found then place the same RAM module in a different slot and test again; if an error is found in every slot then you have a bad RAM module, but if no errors are found in a different slot for the same RAM, then you have a bad motherboard slot.

RAM - Test with Memtest86+

You could run a stress test for your graphics card:

NVIDIA/AMD Video Card - Test with OCCT
My System SpecsSystem Spec
12 Nov 2012   #17
PhonicStudios

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

I'll do memtest tomorrow, as I have to go in a bit, i'll run that stress test now and ill edit the post whether it works or not, Arc, trust me all you're going to see on that window is Windows 7 Home Premium SP1, 4GB ram, 64-bit operating system and 5,9 for performance index.. nothing much.

Thanks alot for all your help guys, much appreciated.
As said, blueRobot, the results of the MemTest will be posted tomorrow.


edit: I have another question, I just checked my CPU on CPU-Z, and it shows that it sometimes drops to 1197MHz, and little time later up to 2925MHz, OCCT constantly shows 1197MHz, but I don't quite trust that program.. is the speed supposed to drop and increase like that?

Best regards, Martin
My System SpecsSystem Spec
12 Nov 2012   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by PhonicStudios View Post
Arc, trust me all you're going to see on that window is Windows 7 Home Premium SP1, 4GB ram, 64-bit operating system and 5,9 for performance index.. nothing much.
Still we needed to compare it. It is strange that the RAM volume will be shown different in different locations.
My System SpecsSystem Spec
12 Nov 2012   #19
Slartybart

x64 (6.3.9600) Win8.1 Pro & soon dual boot x64 (6.1.7601) Win7_SP1 HomePrem
 
 

Martin, you have the best of the best helping you with the issue on your machine. Please provide them with the information requested - it will make problem resoultion all the easier.

Having said that (my standard help us help you speech), I'd like to see the full Speccy report.

Launch Speccy, let it collect system information, then PUBLISH (Speccy file menu -> publish) the report - Speccy will give you a URL, please post that URL here.

I'd also like to see more information in your system specs -> Use the Easy System Specs link in my signature so you don't have to type all of the information - the small exe in the tutorial will fill in the information for you if you're logged on to SF and you select that option (my other standrard help us help you speech).

Why? Because I don't know if you built this machine, it's an OEM machine, if you remembered all of the components..... you get the idea. The utility does all of that for you, the only thing it might not do is specifiy the model of an OEM machine, please enter that manually. Take a look at some of the users system specs on this thread (lower left of any post) and that will give you an idea.

The more information you provide, either thorugh your feedback, the output from a utilty, and screen shots, the better and quicker your outcome.

Thanks,

Bill
.
My System SpecsSystem Spec
12 Nov 2012   #20
PhonicStudios

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Here's speccy: http://speccy.piriform.com/results/k...uWqkSIajoMiLT7
If you look at the temperatures.. they're high because I'm running Battlefield 3 (1280x720 LOW) at this moment.

I have noticed that my computer is alot slower now, games take longer to load, I actually saw Battlefield 3 rendering in-game (I never seen that before), and my mouse sometimes is stuck while alt-tabbing out of BF3, purely because of lagg.. which hasn't occured before either..
My System SpecsSystem Spec
Reply

 BSOD - IRQL not less or equal, Page fault, Memory Management, etc.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Driver IRQL Not Less or Equal BSOD followed by Page Fault in Non-Paged
Lately I've been having all the games on my computer crash within about 2-3 minutes of starting them, and sometimes I get a Driver IRQL Not Less or Equal BSOD in place of a crash. I had two of these BSOD's last week, and all of them seem to be followed by a Page Fault in Non-Paged Area BSOD. I've...
BSOD Help and Support
Frequent BSOD, Memory Management, Page Fault, Driver IRQL, etc..
I have a 2007 HP Pavilion that originally had Vista and I started getting BSOD and most were related to ntkrnlpa.exe. I erased the hard drive and updated to Windows 7 professional the other day but the blue screens continue. I've uploaded the zip file generated from the SF diagnostic tool. ...
BSOD Help and Support
Mulitple BSOD - Memory Management, IRQL not less or equal, Page Fault.
Hello, I think I'm correct in saying that this is my first time posting to a forum with regards to my BSODs (Amazingly, I haven't had any until now). So over the past month I've been getting some issues with various BSOD's popping up, and I think it is either a motherboard or memory issue...
BSOD Help and Support
BSOD, Memory Management & IRQL not less or equal
Hi, two days ago my computer was running smoothly and fine. Then the day after, i got a bunch of BSODs. Help me pretty please :) Here are the dump files i got and my PC specs. OS: Windows 7 Professional 32-bit Processor: AMD Athlon 64 x2 5000+ Memory: 2GB RAM Mobo: ASRock N68C-S UCC...
BSOD Help and Support
BSOD IRQL Not Less or Equal, AFD.sys, Page fault in non paged area,
XPS 710 Originally was running Windows XP MEdia Center. Upgraded to Win7 64 in 2009 Recent changes Replaced original TV internal Tuner with Hauppaugel WinTV-HVR-2250 Also Changed out 2 sticks of 1G DDR2 667, with 2 sticks of 2G DDR2 667 ( now running 8G memory Processor is 2.66 Quad...
BSOD Help and Support
BSOD irql not less or equal, memory management and more
I am at my wits end! i have had my custom built computer for almost 2 years now used to have an ASUS P5N32-E SLI Plus AiLifestyle nForce 650i SLI/570 SLI Socket 775 8 channel audio ATX Motherboard and thought that it was causing my blue screens due to the chipset on the board being quite...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App