Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD hal.dll, ntoskrnl.exe pci.sys

19 Nov 2012   #21
x BlueRobot

 

Code:
CLOCK_WATCHDOG_TIMEOUT (101)

BugCheck 101, {30, 0, fffff88003364180, 2}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Code:
Usual causes:  Device driver, BIOS bug, hardware defect
I wanted to stress the hardware defect within the usual causes, since your previous crashes have pointed to the 0x124 BSODs; this BSOD from what I have read is usually due to the processor having problems, either way this can be caused by a corrupted BIOS which is not the best thing to have either.

Was this crash during Safe Mode? More information and troubleshooting steps here:Your other crash was 0xA which has a more software-related cause, but still has the potential to point to a corrupted BIOS and some compatibility issues also.

The two BSODs I checked were dated with today's date.


My System SpecsSystem Spec
.
19 Nov 2012   #22
sabbyblue

Windows 7 Home Premium, 64bit Service Pack 1
 
 

I dont see this 0x101 in the dumps. I know which dump is from when i was in SAFE mode but i dont know how to find the 0x101 in the dumps

Would the system restores that have been done (by me and by the computer automatically) have written over the BIOS? I ask because I did update the BIOS a while ago (not sure what date it was) but now i wonder if that update has been undone, so to speak.
My System SpecsSystem Spec
20 Nov 2012   #23
x BlueRobot

 

The 0x101 is the latest dump file, you need a BSOD debugging program to view the details of the crash files, and System Restore only resets drivers and programs after the restore point was created.The dump occurred when you were in Safe Mode, it was dated on the 19th (yesterday).
My System SpecsSystem Spec
.

20 Nov 2012   #24
sabbyblue

Windows 7 Home Premium, 64bit Service Pack 1
 
 

Thank you, again. There were a few on 11/19, which is why i didnt know. The one in safe mode was at 2:20, there was another at 2:26 that one was in normal mode.

There has been some changes. I was in normal and i moved/touched the usb cable in the back of the computer and i immediately trapped. I booted up and did a system restore to 11/11 to get some of those non working modules to work again. While doing the restore, the system trapped. I brought it up in SAFE mode and got the msg that the restore worked (?). I decided to update the BIOS from the Dell site and the BIOS update ran for an hour and was still running. I did not want to interrupt. I contacted Dell via a chat and she said i can do a hard shutdown. Since she assured me nothing wrong would happen I decided to try closing the application, first. That worked. So I tried booting up normal, now that i was restored to 11/11. I had no problems. A Windows update happened and the computer rebooted after 4 hours and I thought that was going to be the death of me. But it has not.

I have the old BIOS from 2010.

The only change is that i have removed a cable from one of the usb ports (2.0) in the back and put it in the front (a 3.0). The port that i removed the cable from is still empty.

Normally my computer is very loud. the fans are going either very fast or even when not busy i can hear the fans going. Now, i hear almost nothing. When i touched the usb and removed that cable i also tilted the computer, but just a bit.

It is a mystery to me but with the USB error you saw from the beginning and now that i no longer have a cable in one of those ports, i am thinking that port may have had a problem/short/ or something? I don't know how that would relate to the fans, tho. Maybe the tilt reset the fan in place?

I am almost postitive i still have the old usb drivers since i am now restored to 11/11.

One thing i did not do last nite is turn the computer off. I am reluctant to do that since rebooting is when i would typically get the traps. (not all traps were from reboot but almost every reboot resulted in one trap)

I am not sure what to do at this point. I feel like i am working with a very delicate machine.
My System SpecsSystem Spec
20 Nov 2012   #25
sabbyblue

Windows 7 Home Premium, 64bit Service Pack 1
 
 

I do have Bluescreenview, btw.
My System SpecsSystem Spec
21 Nov 2012   #26
x BlueRobot

 

Reboot and see what happens; remember that you are still under warranty and there is still an option of getting Dell to send you a completely new replacement for free.
My System SpecsSystem Spec
23 Nov 2012   #27
sabbyblue

Windows 7 Home Premium, 64bit Service Pack 1
 
 

I have rebooted 2x now. No problems at all. And the fans remain quiet.

I guess the next test is to put something in that USB port. I hesitate cause I am thoroughly enjoying this peace of no traps. But i guess i should to get down to the problem.
My System SpecsSystem Spec
24 Nov 2012   #28
x BlueRobot

 

Yes, place a USB stick in the port and see what happens, are any of the other USB ports working?

Please post back your results
My System SpecsSystem Spec
25 Nov 2012   #29
sabbyblue

Windows 7 Home Premium, 64bit Service Pack 1
 
 

My other usb ports are working. Even the one I pulled the cable out of was working at the time.

I have not yet put anything in that one usb port because with no changes apparant to me, the fans have started to run hard at times (downloading, opening large folders on the my harddrive). Also, something else that used to happen and had stopped has started again. I think the monitor or video card is slow to respond. I have open windows hanging for long periods (i cant close or move them and the busy mouse icon is turning). These were things that were happening for a few months before the traps started. So i thought maybe i should keep the usb out of the mix for now to see how bad it gets.

but, there have been no traps!
My System SpecsSystem Spec
25 Nov 2012   #30
x BlueRobot

 

Good to know that no BSODs have occurred so far

That doesn't seem normal for a system like yours, check the hard-drive for any bad sectors and file system errors with:Post a screenshot of the Crystal Disk Info summary page:Scan with System File Checker to check for missing or corrupted protected Windows 7 files, Windows will attempt to repair these files automatically from within the operating system if possible:
My System SpecsSystem Spec
Reply

 BSOD hal.dll, ntoskrnl.exe pci.sys




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
0x00000124 ntoskrnl.exe ntoskrnl.exe+4a63cc BSOD Error runninganygame
i keep getting BSOD when playing game new graphics i dont know where to start when its comes to BSOD stuff 110414-10576-01.dmp 11/4/2014 10:48:39 PM 0x00000124 00000000`00000000 fffffa80`0af318f8 00000000`00000000 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+4a63cc ...
BSOD Help and Support
BSOD Address:ntoskrnl.exe+75bc0; dxgmms1.sys,ntoskrnl.exe,Ntfs.sys
Hi, to make things easier for you,below is the Bug Check String, Driver, and crash address SYSTEM_SERVICE_EXCEPTION___dxgmms1.sys___ntoskrnl.exe+75bc0 MEMORY_MANAGEMENT_______ntoskrnl.exe____ntoskrnl.exe+75bc0 SYSTEM_SERVICE_EXCEPTION___ntoskrnl.exe____ntoskrnl.exe+75bc0...
BSOD Help and Support
BSOD when goes sleep, ntoskrnl.exe+e96d2/ntoskrnl.exe+81e7a
When I put my pc in sleep mode it often crashes: the screen goes normally in sleep mode, but the pc continues to stay awake for several minutes than BSOD & restart or BSOD & shut off. Thanks to BlueScreenView I found what is seemingly the guilty process, but I don't know what to do now. Thanks...
BSOD Help and Support
BSOD ntoskrnl.exe , All the Time !! Crash Address ntoskrnl.exe+80640
Jan 2014 //------------------------------------------- How to Solve : 1- I've uninstalled my windows and recover my laptop with recovery DVD to it's original factory state.(original windows :)) 2- Never installed Norton internet security again , I'm using Microsoft Security Essentials now. 3-...
BSOD Help and Support
Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0
I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and...
BSOD Help and Support
BSOD Ntoskrnl.exe+7efc0 and Ntoskrnl.exe+75c40
I keep getting a BSOD (Critical_Object_Termination) but have no idea what is causing the issue. I tried in vain to debug my own minidump files but ended up getting nowhere. So far i have run MemTest over the weekend with 107 passes. I also ran Prime95 64-bit for 4 hours on each of the FFT tests...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App