Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD using OUTLOOK or IDLE, error 101

12 Nov 2012   #1
tkahn

New York
 
 
BSOD using OUTLOOK or IDLE, error 101

reformatted not long ago due to frequent BSOD but now its happening again =/

laptop is about one year old please help!

"Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 101
BCP1: 0000000000000019
BCP2: 0000000000000000
BCP3: FFFFF880009B2180
BCP4: 0000000000000004
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1"

much appreciated!!


My System SpecsSystem Spec
.
12 Nov 2012   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Try what's mentioned on this thread: STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
My System SpecsSystem Spec
28 Nov 2012   #3
tkahn

New York
 
 

thank you, finally resolved it haha
My System SpecsSystem Spec
.

28 Nov 2012   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Thanks for the letting us know.

Posting what you did may be helpful to users suffering the same issue
My System SpecsSystem Spec
28 Nov 2012   #5
tkahn

New York
 
 

I ran the disk verifier to find the faulty driver which in my case was:
Daemon tools - dtsoftbus01.sys

it took system restore to get back into windows to disable the verifier but all is well now, thank you!
My System SpecsSystem Spec
28 Nov 2012   #6
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

I see, let us know if there are any other issues.

BTW, use either MSE or AVG. Two antiviruses may conflict. (Recommend MSE from a BSOD perspective)

You may want to update the following drivers:
Code:
0: kd> lmvm rtl8192Ce
start             end                 module name
fffff880`0788d000 fffff880`079f8000   rtl8192Ce T (no symbols)           
    Loaded symbol image file: rtl8192Ce.sys
    Image path: rtl8192Ce.sys
    Image name: rtl8192Ce.sys
    Timestamp:        Fri Dec 03 16:56:21 2010 (4CF8CCD5)
    CheckSum:         00118EED
    ImageSize:        0016B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
...................................................................
0: kd> lmvm nusb3hub
start             end                 module name
fffff880`07cb7000 fffff880`07cd0000   nusb3hub T (no symbols)           
    Loaded symbol image file: nusb3hub.sys
    Image path: nusb3hub.sys
    Image name: nusb3hub.sys
    Timestamp:        Fri Nov 19 07:34:24 2010 (4CE5D420)
    CheckSum:         00016001
    ImageSize:        00019000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
How to Clean Left Over Driver Files with Driver Sweeperrtl8192Ce.sys : Driver Reference Table
nusb3hub.sys : Driver Reference Table

Update to SP-1:Good luck.
My System SpecsSystem Spec
28 Nov 2012   #7
tkahn

New York
 
 

last question would be how do i manually update those drivers??
My System SpecsSystem Spec
28 Nov 2012   #8
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

From device manager.

Upgrading drivers for pre-existing device:
  1. Open Driver Install - Device Manager
  2. In the Device Manager locate the device you wish to update the drivers for/look for a
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.
My System SpecsSystem Spec
28 Nov 2012   #9
tkahn

New York
 
 

thank you so much!

for the driver sweeper can i just select all and analyze and clean? because i dont see daemon tools or dt tools on the list
My System SpecsSystem Spec
28 Nov 2012   #10
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

You would have to reinstall all those drivers then.

Find drivers: Drivers and Downloads
Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.

- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: Drivers and Downloads
My System SpecsSystem Spec
Reply

 BSOD using OUTLOOK or IDLE, error 101




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when just idle error 0x000000d1
Hello guys i just recently started getting loads of bsods in a row i would appreciate if you guys could help me out i will attach all the .dmps i have
BSOD Help and Support
BSOD While Idle? Error 0x00000124
Hello, I recently upgraded some parts of my computer, and have been getting a random blue screen only while idle. The errors are very sporadic I have gone days without getting them. I've ran IntelBurnIn, memtest86+, and prime95 without errors and cannot figure out what is wrong. All system...
BSOD Help and Support
BSOD when idle, error 0x0000009f
My computer has started BSOD almost every time I leave my laptop with the lid closed for an extended period of time. The SF tool wasn't able to grab most of the things it was supposed to, so I threw in the information I got from Blue Screen View and copied the dump file. Is this enough information,...
BSOD Help and Support
BSOD while idle, error 09f
I have Windows Home Premium x64. It is the original version installed on my computer, and it is OEM. My hardware and OS are around a year old. While idling or trying to shut down my system encounters this error. I've never had the error while actively using my system.
BSOD Help and Support
BSOD after idle on screen wakeup running outlook quickbooks chrome pap
I have been experiencing the BSOD about twice or three times per day for about two weeks now. I believe the first time this occured was after a Windows update happened. I have had this computer now for almost a year. Was running AVG, but switched to Viper after this problem started. It found one...
BSOD Help and Support
BSOD error while pc is idle
- x64 bit windows 7 Ultimate os - the original installed OS on the system? yes - an OEM or full retail version? full retail - What is the age of system (hardware)? ~1year 8 months - What is the age of OS installation ~2 weeks I just reinstalled the OS because i was giving my pc a fresh...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:57.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App