Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD during random actions, no signal after computer sleeps

27 Nov 2012   #31
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

You have a rather large number of errors present, many involving vbscript and jscript.
It's only just about within the realms of many (many?) manual (!) fixing (rather than a repair install), and could take some time for me to craft a fix - please be patient.
If you haven't heard within 24 hours, please shout at me


My System SpecsSystem Spec
.
27 Nov 2012   #32
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

I think I've get them all now. (we'll soon see!)


I've uploaded a file - CWB Files.zip - to my SkyDrive at https://skydrive.live.com/#cid=936736BB8FCEB92F&id=936736BB8FCEB92F%21526
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder CWB Files in the same place.

Open this folder - there should be two folders inside it (Manifests, and Packages)

Copy the content of the Packages folder to the

C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
My System SpecsSystem Spec
27 Nov 2012   #33
cwburns32

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Quote   Quote: Originally Posted by NoelDP View Post
I think I've get them all now. (we'll soon see!)


I've uploaded a file - CWB Files.zip - to my SkyDrive at https://skydrive.live.com/#cid=936736BB8FCEB92F&id=936736BB8FCEB92F%21526
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder CWB Files in the same place.

Open this folder - there should be two folders inside it (Manifests, and Packages)

Copy the content of the Packages folder to the

C:\Windows\Temp\CheckSur\Servicing\Packages

And the content of the manifests folder (.manifest files) into this folder:

C:\Windows\Temp\CheckSur\Winsxs\Manifests

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.
Copy the packages content to the C:\...\packages and manifest content to C:\...\manifests and replace the existing files in each folder? Or just paste them into those folders without replacing old files?
My System SpecsSystem Spec
.

27 Nov 2012   #34
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

just copy/paste them - no need to delete the old ones
My System SpecsSystem Spec
27 Nov 2012   #35
cwburns32

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Quote   Quote: Originally Posted by NoelDP View Post
just copy/paste them - no need to delete the old ones
That's what I thought but it tells me there are some duplicates and if I want to replace those with the new ones. Sorry to keep slamming you with questions just want to get this straight.

25 conflicts with packages and 15 with manifests...

EIDT: Here is CheckSUR, copied over the files that were in the folder... hope that was okay.
My System SpecsSystem Spec
28 Nov 2012   #36
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

That wasn't too bad - I just missed 4 pairs.
(in a list that long, it's easy to get lost!

back with hopefully the last ones later.
My System SpecsSystem Spec
28 Nov 2012   #37
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

...actually, looking closer, I only missed two

Same procedure - the new download file is
CWBfiles2.zip
My System SpecsSystem Spec
28 Nov 2012   #38
cwburns32

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Quote   Quote: Originally Posted by NoelDP View Post
...actually, looking closer, I only missed two

Same procedure - the new download file is
CWBfiles2.zip
You sir are very helpful, thanks so much! Unfortunately this a problem I found within a problem within a problem. Hopefully you can help me with my other issues as soon as you fix this one. Regardless I appreciate your fast responses and wonderful help!
My System SpecsSystem Spec
28 Nov 2012   #39
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)
 
 

Great - that's cleared CheckSUr of problems.

Now please run SFC /SCANNOW (from an elevated command prompt!), and post the new CBS.log
....


SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

SFC /SCANNOW

and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.


Copy the CBS.log file created (C:\Windows\Logs\CBS\CBS.log) to your desktop (you can't manipulate it directly) and then compress the copy and attach it to your response.
My System SpecsSystem Spec
28 Nov 2012   #40
cwburns32

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Quote   Quote: Originally Posted by NoelDP View Post
Great - that's cleared CheckSUr of problems.

Now please run SFC /SCANNOW (from an elevated command prompt!), and post the new CBS.log
....


SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type

SFC /SCANNOW

and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.


Copy the CBS.log file created (C:\Windows\Logs\CBS\CBS.log) to your desktop (you can't manipulate it directly) and then compress the copy and attach it to your response.
Here you are sir.
My System SpecsSystem Spec
Reply

 BSOD during random actions, no signal after computer sleeps




Thread Tools




Similar help and support threads
Thread Forum
BSOD While Computer Sleeps
Hello. I hope I am posting this right. My system specs are updated. I noticed this problem about a week ago. Every now and then when I wake my laptop up from sleep it is shut down. I press the power on button and I get the "windows did not shut down properly" and when I click on details of the...
BSOD Help and Support
BSOD ,happens at random moments and actions
Hi guys, Can you please help me with this problem, its really annoying. I tried from new OS to new RAM and nothing helps, I install new OS and it works normally for like 2 days and then it starts to happen again. I use computer and i randomly get BSOD in middle of doing something, everytime is...
BSOD Help and Support
BSOD Doing everyday actions on my computer
Hi I recently got new RAM for my computer because the RAM that I just had caused my computer to bluescreen; however, I'm starting to think that it is something other than RAM. Hopefully you guys can help :D
BSOD Help and Support
BSOD whenever computer sleeps
Hi, whenever my computer goes to sleep, I either get a BSOD when I turn it back on, or go straight to the black screen with boot options for "windows has recovered from an unexpected shutdown". the two BCCodes I've been getting are 7a and f4, I think the difference being when I send the...
BSOD Help and Support
BSOD when computer sleeps
Hello, My computer has been randomly crashing after it goes to sleep. After trying to find answers by searching, it seems like it may have to do with a driver, but I can't understand the dmp files. I also cannot open the xml file. Attached is the message I get when I start the computer again. ...
BSOD Help and Support
BSOD while Computer Sleeps
Hi, I keep getting a BSOD while my computer is sleeping. I have tried looking through the reports myself but keep seeing different causes which makes me think maybe its happening when the computer wakes up. Any help would be appreciated. This started happening after Battle Field 3. I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App